Date: Mon, 8 Jan 2018 13:15:44 -0700 From: Alan Somers <asomers@freebsd.org> To: BERTRAND Joel <joel.bertrand@systella.fr> Cc: "freebsd-hackers@freebsd.org" <freebsd-hackers@freebsd.org> Subject: Re: IPv6 Message-ID: <CAOtMX2jP3icG7zMs4Yq7C4xiWi-wyp4nWkvzBsFenhU_Mh5-Lw@mail.gmail.com> In-Reply-To: <03877bcd-2d95-d0b8-6e8a-1628b619540e@systella.fr> References: <03877bcd-2d95-d0b8-6e8a-1628b619540e@systella.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Jan 8, 2018 at 1:03 PM, BERTRAND Joel <joel.bertrand@systella.fr> wrote: > Hello, > > I have installed a long time ago a diskless workstation running > FreeBSD 9. Today, it runs FreeBSD 11.0-RELEASE-p12. > > When I have installed this workstation, I have disabled IPv6 as > IPv6 connection was done by a slow VPN. Now, I have a full IPv6 access. > > Thus, I have reconfigured my router (NetBSD) to announce IPv6 > network (rtadvd). All Linux workstations on LAN take a global IPv6 address > and IPv6 router address. I suppose I have done a mistake on FreeBSD as it > cannot obtain an address. > > root@pythagore:/etc # ifconfig > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=201b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,WOL_MAGIC> > ether d8:cb:8a:7d:10:59 > inet 192.168.10.102 netmask 0xffffff00 broadcast 192.168.10.255 > inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 > inet6 fe80::dacb:8aff:fe7d:1059%re0 prefixlen 64 tentative scopeid > 0x1 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (1000baseT <full-duplex>) > status: active > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 > inet 127.0.0.1 netmask 0xff000000 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > groups: lo > root@pythagore:/etc # grep ip rc.conf > ip6addrctl_enable="YES" > ip6addrctl_verbose="NO" > ip6addrctl_policy="ipv4_prefer" > > Where is my mistake ? > > Best regards, > > JB > You need to add something like : ifconfig_vtnet0_ipv6="inet6 accept_rtadv" -Alan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAOtMX2jP3icG7zMs4Yq7C4xiWi-wyp4nWkvzBsFenhU_Mh5-Lw>