Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 26 Jan 1999 14:11:41 +0100
From:      Poul-Henning Kamp <phk@FreeBSD.ORG>
To:        current@FreeBSD.ORG
Subject:   wd0: DMA failure, DMA status 0 
Message-ID:  <26057.917356301@critter.freebsd.dk>

next in thread | raw e-mail | index | archive | help


Is "wd0: DMA failure, DMA status 0" something which needs looked at ?

Poul-Henning


FreeBSD 4.0-CURRENT #1: Tue Jan 26 12:13:25 CET 1999
    root@schizo.freebsd.dk:/usr/src/sys/compile/SCHIZO
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium Pro (686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping=9
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 134217728 (131072K bytes)
config> quit
avail memory = 128073728 (125072K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfec08000
 cpu1 (AP):  apic id: 12, version: 0x00040011, at 0xfec08000
 io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xf027d000.
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x01 int a irq 18 on pci0.6.
0
fxp0: Ethernet address 00:a0:c9:49:5e:fa
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
vga0: <S3 Trio 64 graphics accelerator> rev 0x04 int a irq 17 on pci0.15.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ff on isa
wdc0: unit 0 (wd0): <ST34520A>, DMA, 32-bit, multi-block-16
wd0: 4341MB (8890560 sectors), 9408 cyls, 15 heads, 63 S/T, 512 B/S
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: routing 8254 via 8259 on pin 0
changing root device to wd0s1a
SMP: AP CPU #1 Launched!
wd0: DMA failure, DMA status 0
wd0: DMA failure, DMA status 0
wd0: DMA failure, DMA status 0
wd0: DMA failure, DMA status 0
wd0: DMA failure, DMA status 0
wd0: DMA failure, DMA status 0

--
Poul-Henning Kamp             FreeBSD coreteam member
phk@FreeBSD.ORG               "Real hackers run -current on their laptop."
FreeBSD -- It will take a long time before progress goes too far!

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?26057.917356301>