Date: Tue, 9 Apr 1996 15:26:14 -0400 (EDT) From: "Engineer, 08.ZIYA" <shyone@constantchange.on.ca> To: gwk@cray.com Cc: joerg_wunsch@uriah.heep.sax.de, jmb@freefall.freebsd.org, freebsd-scsi@freebsd.org, doc@freebsd.org Subject: Re: Tape drive FAQ Message-ID: <Pine.BSF.3.91.960409151702.2505A-100000@dreamlabs.dreaming.org> In-Reply-To: <199604091842.UAA26402@racer.dkrz.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 9 Apr 1996, Georg-W. Koltermann wrote: > > A QIC-02 drive, with a separate interface card? > > > > What does the `wt' driver has to say about it? > > > > -- > > cheers, J"org > > I got a Wangtek 5150 (with separate interface card) about two weeks > ago. It works with the wt driver, I believe--I had only little time > to dump a filesystem and check that I can read stuff back. > > Yes I can also read tapes which were written on SUNOS a while ago with > some other type of QIC150 drive. > > I do have *some* documentation. The booklet says "User's Guide 5125PK > / 5150PK Series Tape Backup System", and "User's Guide No. 63058-001 > Rev. B". The Guide explains the jumper settings, but does not go into > further detail. > > Regards, > > Georg-W. Koltermann, gwk@cray.com > well, let's see... the drive itself is a wangtek model 5099en24 with a chip on it reading "20585-001 rev a", and three jumpers i can see: tng/tg (tng is set), w1 (open)e1 (open) hc 10/5 (set to 5). Ah, and here's more i missed: ihc and three banks, HDR 1, 2 and 3, with 4 2 and 8 sets of pins, respectively., with #2, none, and #4 jumpered. the card is harder to identify... the best i can do is describe that it has a bank of 10 switches, a hoard of individual jumpers, and then jumpers for irq drq and ack. i'll recompile the kernel and toss it in to see what happenes and let you know. Wish me luck! -Mit %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % ShyOne | Mitayai % % Reality Engineer | Project Co-ordinator % % Arcturia Three | DreamLabs % % shyone@constantchange.on.ca | mitayai@dreaming.org % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960409151702.2505A-100000>