Date: Thu, 2 Sep 2004 17:36:25 +1000 From: Peter Jeremy <PeterJeremy@optushome.com.au> To: alpha@freebsd.org Subject: FreeBSD 5.3-BETA2 fails on ES45 Message-ID: <20040902073625.GS423@cirb503493.alcatel.com.au>
next in thread | raw e-mail | index | archive | help
[I originally sent this from work but our DNS was stuffed so it wasn't
accepted by FreeBSD.org. Apologies if a second copy eventually appears]
Probably not a surprise but I thought it would have gotten further
than it did: It starts loading the kernel, spinning happily for a
while and then just halts. I've tried three times (including a
power-on reset) with the same results (except the reported PC). I
expected it not to die until it tried to actually run the kernel.
P00>>>b dqa0
Initializing...
OpenVMS PALcode V1.98-43, Tru64 UNIX PALcode V1.92-33
*** keyboard not plugged in...
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 200000 heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 1250 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
4096 MB of System Memory
Testing Memory
...
probe I/O subsystem
Hose 0 - PCI bus running at 33Mhz
entering idle loop
Hose 1 - PCI bus running at 66Mhz
Hose 2 - AGP bus
Hose 3 - PCI bus running at 33Mhz
starting drivers
starting console on CPU 1
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 1 speed is 1250 MHz
create powerup
initializing GCT/FRU at 22e000
Initializing pka pkb dqa dqb eia eib
Memory Testing and Configuration Status
Array Size Base Address Intlv Mode
--------- ---------- ---------------- ----------
0 2048Mb 0000000000000000 1-Way
1 2048Mb 0000000080000000 1-Way
4096 MB of System Memory
Testing the System
Testing the Disks (read only)
Testing the Network
AlphaServer ES45 Console V6.5-20, built on Jun 5 2003 at 15:26:58
CPU 0 booting
(boot dqa0.0.0.16.0 -flags A)
block 0 of dqa0.0.0.16.0 is a valid boot block
reading 409 blocks from dqa0.0.0.16.0
bootstrap code read in
base = 6e8000, image_start = 0, image_bytes = 33200(209408)
initializing HWRPB at 2000
initializing page table at ffff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x4002b00010162
OSF PAL rev: 0x400210002015c
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@ds10.wbnet, Mon Aug 30 03:48:07 UTC 2004)
Memory: 4194304 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5b77f0+0x4d110 /
halted CPU 0
halt code = 2
kernel stack not valid halt
PC = fffffc00008af428
P00>>>
--
Peter Jeremy
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040902073625.GS423>