Date: Wed, 25 Jan 2012 11:27:06 +0100 From: Maciej Milewski <milu@dat.pl> To: freebsd-wireless@freebsd.org Subject: Re: ath0: device timeout on 9.0-STABLE Message-ID: <1952213.pSGpNs2iPC@snifi> In-Reply-To: <2FBABAB8-A464-4A66-9753-20D72C6A7CB0@di-vision.sk> References: <43606099-9A1E-4B56-87FB-FB1CD23E9A8F@di-vision.sk> <CAJ-VmokEuhvO458r7=hjcxZx3XkmPCmZx_=TM9%2Bpj1AeHvX00Q@mail.gmail.com> <2FBABAB8-A464-4A66-9753-20D72C6A7CB0@di-vision.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
Dnia =C5=9Broda, 25 stycznia 2012 09:13:26 Michal Van=C4=8Do pisze: > Hi, >=20 > thanks for your response. >=20 > Though there is one more thing. Is my adapter supposed to work in 5GH= z band? > I'm sure it works in windows and linux. Trying to switch to a differe= nt > SSID (5GHz one) on the same AP, wlan0 stay unassociated (status: no > carrier): >=20 > # ifconfig wlan0 > wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 = mtu 1500 > =09ether 00:19:7e:52:1c:c4 > =09nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > =09media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > =09status: no carrier > =09ssid "XXX (5 GHz)" channel 36 (5180 MHz 11a) > =09regdomain ETSI2 country SK indoor ecm authmode WPA2/802.11i > =09privacy ON deftxkey UNDEF txpower 17 bmiss 7 mcastrate 6 mgmtrate = 6 > =09scanvalid 450 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 > =09roam:rate 12 wme burst roaming MANUAL >=20 It allowed you to set the 5GHz channel so it supports that if it wasn't= be=20 supporting it would complain: #ifconfig wlan0 mode 11a ifconfig: SIOCSIFMEDIA (media): Device not configured try if ifconfig wlan0 scan or ifconfig wlan0 list scan shows you some=20= networks. --=20 Pozdrawiam, Maciej Milewski
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1952213.pSGpNs2iPC>