Date: Fri, 25 Feb 2000 14:27:40 +0100 (CET) From: Marc Schneiders <marc@freebeastie.org> To: Roger Hardiman <roger@cs.strath.ac.uk> Cc: multimedia@FreeBSD.ORG Subject: Re: fxtv (?) freezes box Message-ID: <Pine.BSF.4.10.10002251425430.5532-100000@propro.freebeastie.org> In-Reply-To: <38B62B19.FAE1C9D5@cs.strath.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Roger,
On Fri, 25 Feb 2000, Roger Hardiman wrote:
> Marc
>
> > A Studio PCTV Rave card (848A chip)
> > in a Pentium 166 MMX with only 32 MB. It runs
> > fine. As soon as I try to change from X to a console (Alt-Ctrl-F2),
> > which works fine otherwise, the box freezes: blank screen. Sound keeps
> > running... Not pingable anymore. Nothing gets it alive again, except
> > the power button.
>
>
> What motherboard chipset is your P166 MMX using.
>
:-) My fault:
FreeBSD 3.4--COYOTE--SNAP #1: Thu Feb 24 20:56:04 CET 2000
marc@lizzy.freebeastie.org:/usr/src/sys/compile/LIZZY
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 167046355 Hz
CPU: Pentium/P55C (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 33554432 (32768K bytes)
avail memory = 30183424 (29476K bytes)
Preloaded elf kernel "kernel" at 0xc0290000.
Probing for devices on PCI bus 0:
chip0: <Intel 82437VX PCI cache memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
es1: <AudioPCI ES1371> rev 0x08 int a irq 5 on pci0.13.0
pcm1: using I/O space register mapping at 0x7f00
es1371: codec vendor CRY revision 19
es1371: codec features Bass & Treble Headphone out 20bit DAC 18bit ADC
es1371: stereo enhancement: Crystal Semiconductor 3D Stereo Enhancement
vga0: <S3 ViRGE graphics accelerator> rev 0x06 int a irq 11 on pci0.14.0
bktr0: <BrookTree 848A> rev 0x12 int a irq 9 on pci0.16.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
Miro TV, Philips SECAM tuner.
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 90845U2>
wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
1 3C5x9 board(s) on ISA found at 0x310
ep0 at 0x310-0x31f irq 10 on isa
ep0: aui/utp/bnc[*BNC*] address 00:a0:24:c4:dc:4d
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s1a
--
Marc Schneiders
marc@venster.nl http://zelf.net
marc@freebeastie.org http://www.freebeastie.org
propro 2:24pm up 17 days, 16:35, load average: 2.00 2.04 2.02
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10002251425430.5532-100000>