Date: Tue, 13 Feb 2001 14:21:55 -0500 From: clemc@mro.cpqcorp.net To: freebsd-mobile@freebsd.org Subject: Re: FreeBSD 4.2 on an Compaq Armada M700 Message-ID: <200102131921.AA05050@polaris.mro.cpqcorp.net> In-Reply-To: Your message of "Tue, 13 Feb 2001 15:59:02 GMT." <Pine.BSF.4.31.0102131556370.63822-100000@herring.nlsystems.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Gentlefolk:
I'm having a bear of time with 4.2-RELEASE on my new Compaq M700 (i386)
laptop. I can boot it standalone (one internal disk and the CDROM
in the multibay) and do the install. But if I power down, plug
the system in the docking station so I can use:
a.) external keyboard & mouse [and external display].
b.) two extra multiport bays - in this case I would like to
fill them with a second disk and either a floppy or
in this example another CDROM.
c.) eventually an external ethernet.
I can power up the system and start to boot. During this time
the external keyboard works fine. I get the usual boot messages
on the vga and in fact get a login prompt on the console, so the
system in running. I am correctly getting a DHCP address for one
of the two ethernet cards, so I am able to login via the network.
But....the system no longer responds to either the builtin or external
keyboard, nor the install ``mouse'' or an external one.
Attached is what I get return from /var/run/dmesg.boot
Any thoughts?
Thanks,
Clem Cole
---
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000
jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (746.61-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 402587648 (393152K bytes)
avail memory = 387465216 (378384K bytes)
Preloaded elf kernel "kernel" at 0xc0436000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x42080000-0x42080fff irq 11 at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x42100000-0x42100fff irq 11 at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x4010-0x401f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4020-0x403f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Atmel Corp. product 0x3301, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x4000-0x400f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x4400-0x44ff irq 11 at device 8.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x4040-0x407f mem 0x42000000-0x4201ffff,0x42180000-0x42180fff irq 11 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:59:16:cc:9e
pci0: <unknown card> (vendor=0x11c1, dev=0x0445) at 9.1 irq 11
pcib2: <Intel 82380FB mobile PCI to PCI bridge> at device 12.0 on pci0
pci4: <PCI bus> on pcib2
atapci1: <CMD 646 ATA controller> port 0x190-0x19f,0x364-0x367,0x160-0x167,0x3e4-0x3e7,0x1e0-0x1e7 irq 11 at device 7.0 on pci4
ata2: at 0x1e0 on atapci1
ata3: at 0x160 on atapci1
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x2000-0x203f mem 0x40000000-0x400fffff,0x40100000-0x40100fff irq 11 at device 8.0 on pci4
fxp1: Ethernet address 00:02:b3:2d:dd:31
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata3-slave: ata_command: timeout waiting for intr
ata3-slave: identify failed
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 11513MB <HITACHI_DK23AA-12> [23392/16/63] at ata0-master UDMA33
ad4: 19077MB <IBM-DJSA-220> [38760/16/63] at ata2-master WDMA2
acd0: CD-RW <UJDA310> at ata0-slave using PIO4
acd1: CDROM <CD-224E> at ata3-master using PIO4
Mounting root from ufs:/dev/ad0s2a
--- cut here for: ps -lax ---
%ps lax
UID PID PPID CPU PRI NI VSZ RSS WCHAN STAT TT TIME COMMAND
0 0 0 0 -18 0 0 0 sched DLs ?? 0:00.00 (swapper)
0 1 0 0 10 0 528 296 wait ILs ?? 0:00.01 /sbin/init -
0 2 0 0 -18 0 0 0 psleep DL ?? 0:00.00 (pagedaemon
0 3 0 0 18 0 0 0 psleep DL ?? 0:00.00 (vmdaemon)
0 4 0 0 -18 0 0 0 psleep DL ?? 0:00.00 (bufdaemon)
0 5 0 0 18 0 0 0 syncer DL ?? 0:00.01 (syncer)
0 33 1 65 18 0 208 92 pause Is ?? 0:00.00 adjkerntz -i
0 58 1 65 2 0 416 296 select Is ?? 0:00.00 pccardd -f /
0 124 1 0 2 0 532 364 select Is ?? 0:00.00 /sbin/dhclie
0 175 1 0 2 0 916 592 select Is ?? 0:00.02 syslogd -s
0 196 1 0 2 0 1032 736 select Is ?? 0:00.01 inetd -wW
0 198 1 0 10 0 952 704 nanslp Is ?? 0:00.00 cron
0 201 1 65 2 0 924 608 select Is ?? 0:00.00 /usr/sbin/lp
0 204 1 0 2 0 2496 1900 select Is ?? 0:00.01 sendmail: ac
0 208 1 65 2 0 2404 1424 select Is ?? 0:00.22 /usr/sbin/ss
0 210 1 0 2 0 888 556 select Is ?? 0:00.00 /usr/sbin/us
0 237 1 60 2 0 884 484 select Is ?? 0:00.00 moused -p /d
0 283 196 0 2 0 2252 1296 select Ss ?? 0:00.03 telnetd
1000 284 283 0 18 0 1316 896 pause Ss p0 0:00.03 -csh (csh)
1000 323 284 0 28 0 416 220 - R+ p0 0:00.00 ps lax
0 275 1 0 3 0 924 592 ttyin Is+ v0 0:00.00 /usr/libexec
0 276 1 0 3 0 924 592 ttyin Is+ v1 0:00.00 /usr/libexec
0 277 1 0 3 0 924 592 ttyin Is+ v2 0:00.00 /usr/libexec
0 278 1 0 3 0 924 592 ttyin Is+ v3 0:00.00 /usr/libexec
0 279 1 0 3 0 924 592 ttyin Is+ v4 0:00.00 /usr/libexec
0 280 1 0 3 0 924 592 ttyin Is+ v5 0:00.00 /usr/libexec
0 281 1 0 3 0 924 592 ttyin Is+ v6 0:00.00 /usr/libexec
0 282 1 0 3 0 924 592 ttyin Is+ v7 0:00.00 /usr/libexec
%
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102131921.AA05050>