Date: Wed, 11 Nov 2009 23:16:10 +0100 From: Olivier Smedts <olivier@gid0.org> To: Mel Flynn <mel.flynn+fbsd.current@mailing.thruhere.net> Cc: freebsd-current@freebsd.org Subject: Re: Possible regression with msk driver Message-ID: <367b2c980911111416i152abdb9hb251c55697d64ea1@mail.gmail.com> In-Reply-To: <200911112311.51709.mel.flynn%2Bfbsd.current@mailing.thruhere.net> References: <200911112311.51709.mel.flynn%2Bfbsd.current@mailing.thruhere.net>
next in thread | previous in thread | raw e-mail | index | archive | help
2009/11/11 Mel Flynn <mel.flynn+fbsd.current@mailing.thruhere.net>: > Hi, > > I just booted a box from 7.2-p4 to FreeBSD 8.0-PRERELEASE #0 r199185. It > didn't ping, even though the interface was marked up and active. No traff= ic at > all. Sometimes I've got the same problem, unplugging and plugging the network cable "solves" the problem. I didn't try to diagnose it but it didn't happen with 7-STABLE. > > The fix was to ifconfig msk0 down; ifconfig msk0 up. From then on, everyt= hing > worked and still is: > mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xe800-0xe8ff mem > 0xf9efc000-0xf9efffff irq 16 at device 0.0 on pci3 > msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on = mskc0 > msk0: Ethernet address: 00:1b:fc:e3:9b:6a > miibus0: <MII bus> on msk0 > e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 > e1000phy0: =A010baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > mskc0: [FILTER] > > mskc0@pci0:3:0:0: =A0 =A0 =A0 class=3D0x020000 card=3D0x826e1043 chip=3D0= x436411ab > rev=3D0x12 hdr=3D0x00 > =A0 =A0vendor =A0 =A0 =3D 'Marvell Semiconductor (Was: Galileo Technology= Ltd)' > =A0 =A0device =A0 =A0 =3D 'Yukon PCI-E Gigabit Ethernet Controller (88E80= 56)' > =A0 =A0class =A0 =A0 =A0=3D network > =A0 =A0subclass =A0 =3D ethernet > > msk0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1= 500 > =A0 =A0 =A0 =A0options=3D11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4> > =A0 =A0 =A0 =A0ether 00:1b:fc:xx:xx:xx > =A0 =A0 =A0 =A0inet 192.168.xxx.xxx netmask 0xffffff00 broadcast 192.168.= xxx.255 > =A0 =A0 =A0 =A0media: Ethernet autoselect (1000baseT <full-duplex,flag0,f= lag1,flag2>) > =A0 =A0 =A0 =A0status: active > > Now - this machine still had 7.x /etc/rc.d, but since ifconfig down/up fi= xed > the problem I don't know if this is a likely suspect. > > My onsite contact is unavailable right now, but if she gets back I will r= eboot > the machine with the mergemaster'd rc.d to see if it's reproducible. > The machine is a dual core 64-bit running i386 SMP kernel with 4G memory = and a > few ACPI problems: > ACPI APIC Table: <A M I =A0OEMAPIC > > ACPI Warning: \\_SB_.PCI0.SBRG.FDC_._FDE: Return type mismatch - found > Package, expected Buffer 20090521 nspredef-1051 > ACPI Warning: Incorrect checksum in table [OEMB] - 4E, should be 43 20090= 521 > tbutils-275 > > With release around the door, I figured I'd get this out there, at the ri= sk of > posting =A0a red herring. > -- > Mel > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org= " > --=20 Olivier Smedts _ ASCII ribbon campaign ( ) e-mail: olivier@gid0.org - against HTML email & vCards X www: http://www.gid0.org - against proprietary attachments / \ "Il y a seulement 10 sortes de gens dans le monde : ceux qui comprennent le binaire, et ceux qui ne le comprennent pas."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?367b2c980911111416i152abdb9hb251c55697d64ea1>