Date: Tue, 19 Jun 2007 14:25:25 +0300 From: Niki Denev <nike_d@cytexbg.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-current@freebsd.org Subject: Re: panic when removing pccard Message-ID: <4677BD25.8030202@cytexbg.com> In-Reply-To: <200706191113.03925.hselasky@c2i.net> References: <466913F0.2060200@cytexbg.com> <200706081220.34991.hselasky@c2i.net> <46779C8C.8000707@cytexbg.com> <200706191113.03925.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hans Petter Selasky wrote: > On Tuesday 19 June 2007 11:06, Niki Denev wrote: > >> Hans Petter Selasky wrote: >> >>> On Friday 08 June 2007 10:31, Niki Denev wrote: >>> >>>> -----BEGIN PGP SIGNED MESSAGE----- >>>> Hash: SHA1 >>>> >>>> I experience the following panic on a few days old -current : >>>> >>>> If i insert and then remove a pcmcia card using the ubsa module >>>> (Vodafone Mobile Connect, which actually is Huawei E630 UMTS/HSDPA >>>> modem) the machine panics, because i think the order of removal of the >>>> devices by the kernel is not correct. I'm not sure because i don't have >>>> -STABLE machine with pcmcia now, but i think this problem does not exist >>>> there. >>>> >>>> Here is what happens when card is inserted : >>>> >>> Hi! >>> >>> If you want to be able to remove the card you need to install the new USB >>> stack. The old USB stack is completely broken when it comes to this >>> point! >>> >>> --HPS >>> >>> http://www.turbocat.net/~hselasky/usb4bsd >>> >>> Install the SVN version. >>> _______________________________________________ >>> >> I've followed the instructions and did a svn checkout of the source, >> then did make install and after this i rebuilt my kernel and modules (i >> had to disable if_ural) >> But even after this i get the same panic when removing this specific card. >> >> P.S.: How can i be sure that my new kernel and modules are using the new >> USB stack? >> I'm thinking that maybe something got wrong with the installation. >> > > Check the "dmesg". > > If you see something like: > > usb0: 12MBps Full Speed USB v1.0 > usb1: 12MBps Full Speed USB v1.0 > usb2: 12MBps Full Speed USB v1.0 > usb3: 480MBps High Speed USB v2.0 > > Then you are using the new stack. > > Make sure that you are using the latest version. Hence you needed to > remove "if_ural.c" it does not sound like you are using the latest version. > > Do a "svn update" again, build a new package, install that, and build a new > kernel. > > --HPS > > I csuped a fresh -current source, then did a frech svn checkout of the new usb stack make package and make install went ok, then i proceeded to build the kernel, but it failed and complained about missing usbdevs.h i regenerated the file using the awk script in sys/tools and sys/dev/usb/usbdevs as source file, but then the build failed again with (these messages were also present in the first build failure): cc: /usr/src/sys/dev/usb/usb_requests.c: No such file or directory cc: /usr/src/sys/dev/usb/usb_compat_linux.c: No such file or directory cc: /usr/src/sys/dev/usb/usb_transfer.c: No such file or directory cc: /usr/src/sys/dev/usb/usb_cdev.c: No such file or directory cc: /usr/src/sys/dev/usb/usb_hid.c: No such file or directory mkdep: compile failed *** Error code 1 Stop in /usr/obj/usr/src/sys/PCGU3. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Maybe i'm doing something terribly wrong.. i'm not sure..or the new stack is lagging behind the recent usb changes in the tree? My kernconf is based on GENERIC, but with SCHED_ULE, added device spic and CPU_ENABLE_LONGRUN. I'm also using ccache to build kernel and world, but build attempt without ccache also resulted in the same failure. P.S.: I didn't had anything like "usb0: 12MBps Full Speed USB v1.0 " in my first build, so i'm 99.9% sure that it wasn't using the new stack, hence the same kernel panic when removing the card. Niki
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4677BD25.8030202>