Date: Fri, 14 Mar 2014 16:42:55 -0300 From: Luiz Otavio O Souza <lists.br@gmail.com> To: Milan Obuch <freebsd-mips@dino.sk> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: Router Station Pro etherswitchcfg problem Message-ID: <CAB=2f8xobAEG%2BfK4YXHMMOo2LZAcT8LakLjeHJ_z-qUevWbsVg@mail.gmail.com> In-Reply-To: <20140314143905.081f073d@zeta.dino.sk> References: <20140313215332.7824a6e5@zeta.dino.sk> <CAB=2f8xfRVnsLK2hJotkKuG2bTnSfUAVOzDvH_OycOQFi8uTQA@mail.gmail.com> <20140314143905.081f073d@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 14 March 2014 10:39, Milan Obus wrote: > On Fri, 14 Mar 2014 09:28:37 -0300 > Luiz Otavio O Souza wrote: > >> Hey Milan, >> >> I'll look into this. Just give me a couple of days so i can recycle my >> RSPRO setup. >> >> Regards, >> Luiz >> > > I found a workaround (kind of), see below. > > > [ snip ] > > With command 'etherswitchcfg port0 addtag pvid 1', config for port 0 > becomes > > port0: > pvid: 1 > flags=5<CPUPORT,ADDTAG> > media: Ethernet 1000baseT <full-duplex> > status: active > > and _all_ frames sent to CPU have dot1q header. This way I can create > up to 16 vlan groups on etherswitch (and correspondign arge1.n > subinterfaces) to achieve what I usually want, just one thing seems not > to be possible this way - hybrid port with both native (untagged) and > tagged traffic. > > In any case, it would be good to have this better documented. I don't > know if we have any place for this. man page is good, but not > everything did work for me. > > Milan Yes Milan, that is correct i remember now. You have to enable the tagging on the CPU port to receive the tagged packets. What i don't remember is why this switch was coded with the tag/untag feature per port and not per vlan, but i guess that was because i don't have the docs for it. While you can't have the hybrid setup, the trunk setup works fine with FreeBSD. And, yes, we need to get a better man page. If you have suggestions you can send it as text diffs to me, otherwise i'll try to get more working examples when i have some quality time with my RSPRO/RB450G again. Thanks, Luiz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB=2f8xobAEG%2BfK4YXHMMOo2LZAcT8LakLjeHJ_z-qUevWbsVg>