Date: Tue, 27 Feb 2001 09:56:39 +1100 From: Murray Taylor <mtaylor@bytecraft.com.au> To: "'freebsd-hardware@freebsd.org'" <freebsd-hardware@freebsd.org>, "'freebsd-questions@freebsd.org'" <freebsd-questions@freebsd.org> Subject: ELSA Gloria video card and X Message-ID: <710709BB8B02D311942E006067441810544266@MELEXC01>
next in thread | raw e-mail | index | archive | help
I am establishing FreeBSD 4.2 Release (from the CD Roms) on a Compaq A550.
X is the CDrom release (3.3.6 I think)
Its a mega machine (dual 800Mhz processors, 512 Meg RAM etc etc...) as it
used to be
a graphics workstation.
As such I am trying to get X up and running, and am falling in a heap.
The video card is an ELSA Gloria II-64 (from docs)
chip NVIO GL rev A3
DAC integrated RAMDAC
memory 64Mb
During an attempt to setup X during sysinstall I got to a point where
X -probeonly ran (well staggered and crashed) and managed to get this also
PCI: NVidia Quadro Rev 16
memory @ 0xfd000000, 0xf0000000
chipset Quadro
videoram 65408k
SuperProbe returns
First video: Generic VGA (or unknown SVGA)
i.e. nothing useful
I have recompiled the kernel to add IPFW and drop some uneeded net devices.
Does anyone have this card running? All help appreciated.
Murray Taylor
Project Engineer
Bytecraft P/L +61 3 9587 2555
+61 3 9580 7690 fax
mtaylor@bytecraft.com.au
Current dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Mon Feb 19 10:01:04 EST 2001
root@spyder.bytecraft.com.xxx:/usr/src/sys/compile/SPYDER
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 863933901 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (863.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
avail memory = 519200768 (507032K bytes)
Preloaded elf kernel "kernel" at 0xc0350000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035009c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=1a23)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Quadro graphics accelerator> at 0.0 irq 11
pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem
0xefe00000-0xefefffff,0xefd00000-0xefd00fff irq 11 at device 2.0 on pci2
fxp0: Ethernet address 00:50:8b:f1:de:df
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x5000-0x50ff mem
0xeff00000-0xeff00fff irq 11 at device 7.0 on pci2
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
pci2: <unknown card> (vendor=0x1274, dev=0x5880) at 11.0 irq 11
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0x6460-0x646f at device 31.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0x6440-0x645f irq 11 at
device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 11
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port
0x6400-0x643f,0x6000-0x60ff irq 11 at device 31.5 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to accept, logging limited to 100 packets/entry by default
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
acd0: CDROM <Compaq CRD-8402B> at ata1-master using PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQPC ATLAS10K2-TY184L DDC2> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?710709BB8B02D311942E006067441810544266>