Date: Fri, 24 May 2002 11:00:04 +0200 (CEST) From: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> To: freebsd-stable@freebsd.org Subject: USBD crashes after a while Message-ID: <20020524105149.C13841-100000@klima.physik.uni-mainz.de>
next in thread | raw e-mail | index | archive | help
Hello.
We have a system running FreeBSD 4.6 as cvsupdated a week ago
(see uname and dmesg output which follows), based on a ASUS
A7V266-E mainboard, 256MB DDR RAM (Infineon), 1,4 GHz AMD
CPU.
The system runs 'stable', but after a while, a couple of hours or a
couple of days, it seems that the usbd crashes. There is no error log or
something else. After rebooting the machine I can work with X and the
console mouse pointer fine (mouse is a USB Logitech wheel mouse), but
after several days the mouse seems to be dead. This phenomenon occurs in
both config environments, either when the mouse has been attached to one
of the USB ports or via a HUB integrated in the monitor socket. I
started the usbd just for fun by hand - and voila, the mouse works up
then as usual.
Is there a known bug? Or has usbd a kind of 'inactivitay timer' that
detaches itself from beeing present? Or is this a typical
misconfiguartion?
Output here:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RC #40: Sat May 18 15:51:10 CEST 2002
root@zerberus.physik.uni-mainz.de:/usr/obj/usr/src/sys/ZERBERUS
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1410248465 Hz
CPU: AMD Athlon(TM)Processor (1410.25-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
avail memory = 256741376 (250724K bytes)
Preloaded elf kernel "kernel" at 0xc043c000.
Preloaded elf module "agp.ko" at 0xc043c09c.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
Using $PIR table, 10 entries at 0xc00f1420
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
pcm0: <CMedia CMI8738> at device 5.0 on pci0
pcm0: cmi_attach: Cannot allocate bus resource
device_probe_and_attach: pcm0 attach returned 6
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xed000000-0xed0fffff,0xed800000-0xed800fff irq 11 at device 13.0 on pci0
fxp0: Ethernet address 00:03:47:4d:b9:f9
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xd000-0xd0ff mem 0xec800000-0xec800fff irq 12 at device 15.0 on pci0
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xb800-0xb80f irq 0 at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 5 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 5 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 5 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd17ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <8 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0xc on isa0
ppc0: SMC-like chipset (ECP/EPP) in ECP+EPP mode (EPP 1.9)
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA100
acd0: CDROM <CD-540E> at ata1-master UDMA33
afd0: 0MB <IOMEGA ZIP 250 ATAPI Floppy> [0/64/32] at ata1-slave PIO3
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
got bad cookie vp 0xd20ac800 bp 0xc68a8980
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
arp: runt packet
uhub3: Iiyama product 0x0201, class 9/0, rev 1.10/1.10, addr 2
uhub3: 4 ports with 4 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
uname -a:
FreeBSD zerberus.physik.uni-mainz.de 4.6-RC FreeBSD 4.6-RC #40: Sat May 18 15:51:10 CEST 2002 root@zerberus.physik.uni-mainz.de:/usr/obj/usr/src/sys/ZERBERUS i386
--
MfG
O. Hartmann
ohartman@klima.physik.uni-mainz.de
------------------------------------------------------------------
IT-Administration des Institutes fuer Physik der Atmosphaere (IPA)
------------------------------------------------------------------
Johannes Gutenberg Universitaet Mainz
Becherweg 21
55099 Mainz
Tel: +496131/3924662 (Maschinenraum)
Tel: +496131/3924144 (Buero)
FAX: +496131/3923532
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020524105149.C13841-100000>