Date: Fri, 5 Jan 2001 03:32:15 +0600 (NOVT) From: Max Khon <fjoe@newst.net> To: stable@FreeBSD.ORG Subject: Re: ad0: WRITE command timeout tag=0 serv=0 - resetting Message-ID: <Pine.BSF.4.21.0101050331340.62768-200000@localhost> In-Reply-To: <Pine.BSF.4.21.0101050306150.62768-200000@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
hi, there!
On Fri, 5 Jan 2001, Max Khon wrote:
> Today I have installed latest -stable on a machine where previously I had
> 4.1-RELEASE working fine.
>
> after make installkernel/reboot I have got the following messages on
> console:
>
> ad0: WRITE command timeout tag=0 serv=0 - resetting
> ata0: resetting devices .. done
> ad0: WRITE command timeout tag=0 serv=0 - resetting
> ata0: resetting devices .. done
>
> The machine had cdrom drive:
> acd0: CDROM <MATSHITA CR-593> at ata0-slave using PIO4
>
> After I have disconnected cdrom drive the machine booted ok.
> dmesg (after successful boot, without cdrom connected) attached.
> Unfortunately I do not have access to the console (the machine is located
> on another continent).
sorry, I have attached wrong dmesg.
correct dmesg in attachement.
/fjoe
[-- Attachment #2 --]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #0: Thu Jan 4 15:44:58 EST 2001
admin@ms34.mai.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134201344 (131056K bytes)
avail memory = 126361600 (123400K bytes)
Preloaded elf kernel "kernel" at 0xc0438000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia/SGS-Thomson Riva128 graphics accelerator> at 0.0 irq 11
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xd6000000-0xd600007f irq 5 at device 10.0 on pci0
xl0: Ethernet address: 00:50:da:92:b8:ea
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xd400-0xd40f irq 0 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: 9787MB <WDC WD102AA> [19885/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0101050331340.62768-200000>