Date: Mon, 18 Feb 2002 18:17:00 -0500 From: Anish Mistry <mistry.7@osu.edu> To: freebsd-multimedia@FreeBSD.ORG Subject: fxtv - capture freezing Message-ID: <200202182314.SAA02904@mail6.uts.ohio-state.edu>
next in thread | raw e-mail | index | archive | help
I am having a problem with capturing video with fxtv. I can watch tv jus=
t=20
fine, but when I go to record I it will freeze (hardlock) after a few sec=
onds=20
so I have to reboot. This happens saving to both my harddrives both UDMA=
66=20
(UFS&FAT32). Would this be an IRQ problem, but why would normal capture =
work=20
fine?
FXTV: v1.03
TV Tuner: ATI TV Wonder VE (BT878 i think?)
bktr0: <BrookTree 878> mem 0xdd002000-0xdd002fff irq 10 at device 8.0 on =
pci0
bktr0: Warning - card vendor 0x1002 (model 0x0003) unknown.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
# sysctl -w hw.bt848.tuner
hw.bt848.tuner: 4
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #15: Thu Feb 14 01:06:32 EST 2002
amistry@rusty.resnet.ohio-state.edu:/usr/obj/usr/src/sys/RUSTY
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(tm) Processor (601.37-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x630 Stepping =3D 0
=20
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory =3D 268369920 (262080K bytes)
avail memory =3D 257589248 (251552K bytes)
Preloaded elf kernel "kernel" at 0xc039c000.
Preloaded elf module "agp.ko" at 0xc039c09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdd00
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem=20
0xd8000000-0xd9ffffff at device 0.0 on pci0
pcib2: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pc=
i0
pci1: <PCI bus> on pcib2
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd000-0xd00f at device 7.1 o=
n=20
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.=
2 on=20
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq =
9 at=20
device 7.5 on pci0
bktr0: <BrookTree 878> mem 0xdd002000-0xdd002fff irq 10 at device 8.0 on =
pci0
bktr0: Warning - card vendor 0x1002 (model 0x0003) unknown.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
pci0: <unknown card> (vendor=3D0x109e, dev=3D0x0878) at 8.1 irq 10
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xe800-0xe8ff mem=20
0xdd001000-0xdd0010ff irq 11 at device 11.0 on pci0
dc0: Ethernet address: 00:00:94:b6:42:bc
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xcc7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
ad0: 14655MB <Maxtor 31536U2> [29777/16/63] at ata0-master UDMA66
ad1: 38166MB <WDC WD400AB-00CMB0> [77545/16/63] at ata0-slave UDMA66
acd0: CDROM <ATAPI 52X CDROM> at ata1-master using PIO4
Mounting root from ufs:/dev/ad1s1a
Thanks,
--=20
Anish Mistry
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200202182314.SAA02904>