Skip site navigation (1)Skip section navigation (2) 
Date:      Wed, 20 Aug 2014 01:32:04 +0000 (UTC)
From:      Kevin Lo <kevlo@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r270192 - head/sys/dev/usb/wlan
Message-ID:  <201408200132.s7K1W4QR083664@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help 
Author: kevlo
Date: Wed Aug 20 01:32:04 2014
New Revision: 270192
URL: http://svnweb.freebsd.org/changeset/base/270192

Log:
  If eapol packets are sent at the lowest rate, key negotiation will
  become more reliable.
  
  Submitted by:	Akinori Furukoshi <moonlightakkiy at yahoo dot ca>

Modified:
  head/sys/dev/usb/wlan/if_run.c

Modified: head/sys/dev/usb/wlan/if_run.c
==============================================================================
--- head/sys/dev/usb/wlan/if_run.c	Wed Aug 20 01:26:27 2014	(r270191)
+++ head/sys/dev/usb/wlan/if_run.c	Wed Aug 20 01:32:04 2014	(r270192)
@@ -3255,13 +3255,13 @@ run_set_tx_desc(struct run_softc *sc, st
 	txwi = (struct rt2860_txwi *)(txd + 1);
 	txwi->len = htole16(m->m_pkthdr.len - pad);
 	if (rt2860_rates[ridx].phy == IEEE80211_T_DS) {
-		txwi->phy = htole16(RT2860_PHY_CCK);
+		mcs |= RT2860_PHY_CCK;
 		if (ridx != RT2860_RIDX_CCK1 &&
 		    (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
 			mcs |= RT2860_PHY_SHPRE;
 	} else
-		txwi->phy = htole16(RT2860_PHY_OFDM);
-	txwi->phy |= htole16(mcs);
+		mcs |= RT2860_PHY_OFDM;
+	txwi->phy = htole16(mcs);
 
 	/* check if RTS/CTS or CTS-to-self protection is required */
 	if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
@@ -3338,7 +3338,7 @@ run_tx(struct run_softc *sc, struct mbuf
 
 	/* pickup a rate index */
 	if (IEEE80211_IS_MULTICAST(wh->i_addr1) ||
-	    type != IEEE80211_FC0_TYPE_DATA) {
+	    type != IEEE80211_FC0_TYPE_DATA || m->m_flags & M_EAPOL) {
 		ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ?
 		    RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1;
 		ctl_ridx = rt2860_rates[ridx].ctl_ridx;
@@ -4998,7 +4998,7 @@ run_updateprot_cb(void *arg)
 	tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL;
 	/* setup protection frame rate (MCS code) */
 	tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ?
-	    rt2860_rates[RT2860_RIDX_OFDM6].mcs :
+	    rt2860_rates[RT2860_RIDX_OFDM6].mcs | RT2860_PHY_OFDM :
 	    rt2860_rates[RT2860_RIDX_CCK11].mcs;
 
 	/* CCK frames don't require protection */

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201408200132.s7K1W4QR083664>