Date: Thu, 8 Nov 2001 13:52:21 +0100 (CET) From: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> To: freebsd-stable@freebsd.org Subject: /kernel: /proc: table full ERROR Message-ID: <20011108134452.R57883-100000@klima.physik.uni-mainz.de>
next in thread | raw e-mail | index | archive | help
Hello.
On a AMD K6-2/550 with 256 MB RAM I get the following error
message when trying to compile XFree86-4 or GNOME:
/kernel: /prov: table full
and follwoing a error that sounds like:
can't fork: resource temporarily not available
The kernel is a custom made kernel without any tweaks in memory
handling (MBUFS etc ...). The only options are those for the
AMD K6-2 like WT_ALLOC etc.
The same mainboard (a DFI socket 7 type with 2MB 2nd level cache)
ran with FreeBSD 4.0 up to 4.2, then it has been temporarily
retired and has now been reactivated.
When compiling a kernel based on 'GENERIC' I get this error, too.
Can anyone help or give some hints how to come close to the problem?
This is the most recent dmesg-output:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #17: Wed Nov 7 21:05:48 CET 2001
root@dorette.physik.uni-mainz.de:/usr/obj/usr/src/sys/DORETTE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 551292946 Hz
CPU: AMD-K6(tm) 3D processor (551.29-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257032192 (251008K bytes)
Preloaded elf kernel "kernel" at 0xc03fc000.
Preloaded elf module "agp.ko" at 0xc03fc09c.
netsmb_dev: loaded
K6-family MTRR support enabled (2 registers)
Using $PIR table, 7 entries at 0xc00fdde0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C598 (Apollo MVP3) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 15
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA Apollo ATA controller> at 7.1
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xd800-0xd8ff mem 0xe3102000-0xe3102fff irq 10 at device 18.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdc00-0xdc3f mem 0xe3000000-0xe30fffff,0xe3100000-0xe3100fff irq 14 at device 19.0 on pci0
fxp0: Ethernet address 00:03:47:4d:ba:65
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc1: <Adaptec 2940 SCSI adapter> port 0xe000-0xe0ff mem 0xe3101000-0xe3101fff irq 5 at device 20.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd7000-0xd77ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0xc on isa0
ppc0: SMC-like chipset (ECP/EPP) in ECP+EPP mode (EPP 1.9)
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
DUMMYNET initialized (011031)
IPFW: MOD_LOAD
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
Waiting 3 seconds for SCSI devices to settle
sa0 at ahc1 bus 0 target 5 lun 0
sa0: <HP C1533A 9503> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc1 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R PX-R412C 1.07> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc1 bus 0 target 1 lun 0
cd1: <MATSHITA CD-ROM CR-504 ST23> Removable CD-ROM SCSI-2 device
cd1: 5.000MB/s transfers (5.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DCAS-32160W S65A> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-39130W S97B> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
Thanks in advance,
Oliver
--
MfG
O. Hartmann
ohartman@klima.physik.uni-mainz.de
----------------------------------------------------------------
IT-Administration des Institutes fuer Physik der Atmosphaere (IPA)
----------------------------------------------------------------
Johannes Gutenberg Universitaet Mainz
Becherweg 21
55099 Mainz
Tel: +496131/3924662 (Maschinenraum)
Tel: +496131/3924144
FAX: +496131/3923532
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011108134452.R57883-100000>