Date: Thu, 25 Apr 2002 16:51:41 +0200 From: "Dirk van der Zee" <dirk.van.der.zee@e-wise.nl> To: <FreeBSD-stable@freebsd.org> Subject: fxp0 scb timeout on dell PowerApp 120/1000 Message-ID: <004e01c1ec68$b644f150$7100a8c0@EWISE.NL>
next in thread | raw e-mail | index | archive | help
Hi,
I recently installed FreeBSD 4.5-release #0 on a new Dell PowerApp
(build in March 2002).
The problem is that sometimes it looses the network connection.
Before the connection is lost I get a number of the following messages
in SSH session:
Apr 23 19:57:22 sirius /kernel: fxp0: SCB timeout: 0x70 0x0 0x50 0x0
Apr 23 19:57:22 sirius /kernel: fxp0: SCB timeout: 0x70 0x0 0x50 0x0
Apr 23 19:57:23 sirius /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x0
Apr 23 19:57:23 sirius /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x0
Apr 23 19:57:23 sirius /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x400
Apr 23 19:57:23 sirius /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x400
Apr 23 19:57:23 sirius /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x400
Apr 23 19:57:23 sirius /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x0
Apr 23 19:57:23 sirius /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x400
Apr 23 19:57:23 sirius /kernel: fxp0: SCB timeout: 0x80 0x0 0x50 0x0
Apr 23 19:57:23 sirius last message repeated 5 times
The network card is Intel Pro 10/100B/100+.
I have searched the maillists and found a this kind of problem of number
of times.
But most where solved in August last year and others where SMP related
(which is n/a for this server).
Below is the dmesg log.
Does anyone know how to solve this problem?
I would greatly appreciate any suggestions.
Dirk van der Zee
`
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (993.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
config> di pcic0
config> q
avail memory = 517619712 (505488K bytes)
Preloaded elf kernel "kernel" at 0xc0496000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc049609c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fc730
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib1: <ServerWorks host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib3: <PCI to PCI bridge (vendor=8086 device=b154)> at device 4.0 on
pci1
pci2: <PCI bus> on pcib3
pcib5: <PCI to PCI bridge (vendor=8086 device=b154)> at device 0.0 on
pci2
pci3: <PCI bus> on pcib5
amr0: <AMI MegaRAID> mem 0xf8000000-0xfbffffff irq 5 at device 0.0 on
pci3
amr0: <PERC 3/DC> Firmware 161J, BIOS 3.17, 64MB RAM
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 7
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem
0xfe100000-0xfe1fffff,0xfe2ff000-0xfe2fffff irq 11 at device 1.0 on pci0
fxp0: Ethernet address 00:06:5b:3d:17:de
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xec80-0xecbf mem
0xfe000000-0xfe0fffff,0xfe2fe000-0xfe2fefff irq 10 at device 2.0 on pci0
fxp1: Ethernet address 00:06:5b:3d:17:df
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib2
pcib4: <ServerWorks host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib4
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ata0-slave: ata_command: timeout waiting for intr
ata0-slave: identify failed
acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master using PIO4
amrd0: <MegaRAID logical drive> on amr0
amrd0: 34678MB (71020544 sectors) RAID 1 (optimal)
Mounting root from ufs:/dev/amrd0s1a
WARNING: / was not properly dismounted
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to deny, logging disabled
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004e01c1ec68$b644f150$7100a8c0>