Date: Tue, 10 Jun 2003 11:33:41 +0200 From: Per von Zweigbergk <pvz@e.kth.se> To: freebsd-bugs@freebsd.org Subject: Fwd: 5.0/5.1: Installer does not find CD-ROM drive - even though it's booted off it Message-ID: <9F2836CC-9B26-11D7-A00C-000393C59E6C@e.kth.se>
next in thread | raw e-mail | index | archive | help
I'd like to report this as a bug. I posted this to freebsd-current=20 earlier, but only got one answer for someone else with the same problem. I have not been able to verify this currently with FreeBSD 4.8, as the=20= internet connect here is very slow. I'm going to try that later today.=20= What address should I send bug report followups to? Vidarebefordrat brev: > Fr=E5n: Vitaly Markitantov <vm@dics.com.ua> > Datum: tis 10 jun 2003 08.55.12 > Till: current@freebsd.org > =C4mne: Re: 5.0/5.1: Installer does not find CD-ROM drive - even = though=20 > it's booted off it > > On Mon, Jun 09, 2003 at 10:20:03PM +0200, Per von Zweigbergk wrote: >> Hello. >> >> I'm having difficulty with the ISO image of FreeBSD 5.1. The same >> problem also appeared in 5.0, but since 5.1 had come out, I decided = to >> try that before reporting this bug. >> >> When booting the installer off the CD-ROM and doing a Standard=20 >> install, >> you first get to the stage of partitioning a hard drive. >> >> Then you get to the stage where distributions are chosen. >> >> After that, it wants you to choose install media. I choose CD/DVD, = and >> suddenly it says: >> >> "No CD/DVD devices found!" >> >> This is strange, since I clearly have been able to boot from it, and >> the boot loader seems to find it. >> >> On a whim, I also tried to choose "Floppy" for the install, but that >> didn't work either: >> >> "No floppy devices found!" >> >> This is more than strange. It's truly bizarre. >> >> In the boot loader it says: >> >> BIOS CD is cd0 >> BIOS drive A: is disk0 >> BIOS drive C: is disk1 >> >> And just before it dumps into /stand/sysinstall, I get: >> >> ata1-master: timeout waiting for interrupt >> ata1-master: ATAPI identify failed >> >> The system is new, and has had no OS installed on it previously. I=20 >> have >> upgraded the BIOS to the latest version. >> >> Specifications: >> >> - Microstar 865PE Neo2 LS mother board >> - 3 x Intel 10/100 Desktop Adapter S cards. (Supported by the fxp >> driver) >> - Cheap Geforce 4 MX based AGP graphics card >> - Western Digital Special Edition 120 GB hard drive with 8 MB disk >> cache connected using the onboard ATA100 functionality. Master on the >> first IDE bus. >> - Samsung CD-ROM drive connected to the second IDE bus as Master. = Only >> does ATA33 with the cables I use. > > Looks like Samsung 52X CD-ROM is broken for FreeBSD, i have this=20 > problem > with this drive, when i replace it to Asus 52X CD-ROM, all works = fine. > > > --=20 > Vitaly Markitantov mailto: vm@dics.com.ua > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to=20 > "freebsd-current-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9F2836CC-9B26-11D7-A00C-000393C59E6C>