Date: Thu, 11 May 2006 09:46:29 +0400 From: Boris Samorodov <bsam@ipt.ru> To: "Jakob Breivik Grimstveit" <jakob@grimstveit.no> Cc: freebsd-stable@freebsd.org Subject: Re: panic: page fault on freshly installed 6.1 from cvs Message-ID: <28451466@srv.sem.ipt.ru> In-Reply-To: <77d930220605101628h3d5300d8g54c54c6896f46855@mail.gmail.com> (Jakob Breivik Grimstveit's message of "Thu, 11 May 2006 01:28:29 %2B0200") References: <77d930220605101628h3d5300d8g54c54c6896f46855@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 11 May 2006 01:28:29 +0200 Jakob Breivik Grimstveit wrote: > Just cvsupped and built my own v6.1, and am now unable to boot system. > Boot process proceeds to the USB detection phase, and locks right > after with panic: page fault. > Here is a transcript of what is shown on-screen before crash appears: > nvidia0: <GeForce 6800> mem > 0xfa000000-0xfaffffff,0xe8000000-oxeffffff,0xfb000000-0xfbffffff irq > 16 at device 0.0 on pci1 > WARNING: Device driver " Did you install nvidia driver from ports? Then you should rebuild it. > Fatal trap 12: page fault while in kernel mode > fault virtual address = 0x480008 > fault code = supervisor read, page not present > instruction pointer = 0x20:0xc05936d6 > stack pointer = 0x28:0xc102079c > frame pointer = 0x28:0xc102079c > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = interrupt enabled, resume, IOPL = 0 > current process = 0 (swapper) > trap number = 12 > panic: page fault > Uptime: 1s > Probably a few minor typos, but you get my drift. What fails here, and > what on earth can I do to be able to boot the box again? KERNCONF > based on GENERIC, but removing RAID, SCSI, all network cards (except > MIIBUS and RA), and added sound and atapicam. Make.conf also excludes > the following: > NO_ATM=YES > NO_AUTHPF=yes > NO_BLUETOOTH=yes > NO_FORTRAN=yes > NO_GAMES=yes > NO_I4B=yes > NO_INET6=YES > NO_IPFILTER=yes > NO_KERBEROS=yes > NO_LPR=yes > NO_OBJC=yes > NO_PF=yes > NO_PROFILE=yes > NO_SENDMAIL=yes > NO_TCSH=yes > NO_USB=yes > NO_VINUM=YES > Hope someone can shed any light on this, I'm completely left in the > blind... Single-user mode boot also fails, of course. WBR -- bsam
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?28451466>