Date: Tue, 18 May 2004 12:51:46 -0700 (PDT) From: Nik Azim Azam <nskyline_r35@yahoo.com> To: freebsd-current@freebsd.org Subject: apic lockups Message-ID: <20040518195146.88092.qmail@web21105.mail.yahoo.com>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hello,
I'm having problem with the latest FreeBSD-CURRENT and
APIC. The system is an ALR 6x6 with 6 processors.
Booting with APIC makes the kernel freezes after
diplaying the timecounter message. Ctrl+Alt+Delete
doesn't work, I need to reset the computer. It works
fine if I boot without APIC.
I tried doing 'set hw.apic.mixed_mode=0' at the loader
prompt and it doesn't work.
-CURRENT with APIC dated on 4th of May works fine.
I attach the dmesg and mptable output from -CURRENT
dated on 4th of May and the kernel output from the
latest kernel.
thanks,
nik.
__________________________________
Do you Yahoo!?
SBC Yahoo! - Internet access at a great low price.
http://promo.yahoo.com/sbc/
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Sun May 16 22:53:28 GMT 2004
root@beast.nik.net:/usr/src/sys/i386/compile/BEAST
Preloaded elf kernel "/boot/kernel/kernel" at 0xc070f000.
Calibrating clock(s) ... i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 333342535 Hz
CPU: Overdrive Pentium II/Pentium II Xeon/Celeron (333.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x1632 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000829000 - 0x000000000fb4ffff, 254963712 bytes (62247 pages)
avail memory = 257306624 (245 MB)
MP Configuration Table version 1.4 found at 0xc009fd50
APIC: Using the MPTable enumerator.
SMP: Added CPU 6 (BSP)
SMP: Added CPU 0 (AP)
SMP: Added CPU 1 (AP)
SMP: Added CPU 2 (AP)
SMP: Added CPU 4 (AP)
SMP: Added CPU 5 (AP)
MPTable: <UNISYS Revol. 6X6>
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 2, logical 0:2
APIC ID: physical 4, logical 0:3
APIC ID: physical 5, logical 1:0
APIC ID: physical 6, logical 1:1
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
cpu0 (BSP): APIC ID: 6
cpu1 (AP): APIC ID: 0
cpu2 (AP): APIC ID: 1
cpu3 (AP): APIC ID: 2
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
bios32: Found BIOS32 Service Directory header at 0xc00fdbd0
bios32: Entry = 0xf7cee (c00f7cee) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf7750+0xa10
pnpbios: Found PnP BIOS data at 0xc00fdbe0
pnpbios: Entry = f0000:6721 Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: active-hi
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: active-hi
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: active-hi
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: active-hi
ioapic0: intpin 5 trigger: level
ioapic0: intpin 5 polarity: active-hi
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: active-hi
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: active-hi
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: active-hi
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: active-hi
ioapic0: intpin 10 trigger: level
ioapic0: intpin 10 polarity: active-hi
ioapic0: intpin 11 trigger: level
ioapic0: intpin 11 polarity: active-hi
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: active-hi
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: active-hi
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: active-hi
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: active-hi
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: active-hi
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: active-hi
ioapic0 <Version 1.1> irqs 0-15 on motherboard
cpu0 BSP:
ID: 0x06000000 VER: 0x00040011 LDR: 0x12000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
cpu0 on motherboard
cpu1 on motherboard
cpu2 on motherboard
cpu3 on motherboard
cpu4 on motherboard
cpu5 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a0c0
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 1 2 [class=000000] 3 [class=01018a] 4 5 6 7 8 9 10 11 12 [class=010000] [hdr=80] is there (id=00509005)
pcibios: BIOS version 2.10
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x15
bus=0, slot=2, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcb0, size 4, enabled
found-> vendor=0x10ad, dev=0x0105, revid=0x06
bus=0, slot=3, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0015, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000f800, size 8, enabled
map[14]: type 1, range 64, base feaff000, size 12, enabled
found-> vendor=0x9005, dev=0x0050, revid=0x00
bus=0, slot=12, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, port disabled
map[14]: type 1, range 64, base feafe000, size 12, memory disabled
found-> vendor=0x9005, dev=0x0050, revid=0x00
bus=0, slot=12, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0014, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000fcc0, size 6, port disabled
found-> vendor=0x10b7, dev=0x9050, revid=0x00
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
map[10]: type 3, range 32, base fd000000, size 24, enabled
found-> vendor=0x1013, dev=0x00b8, revid=0x00
bus=0, slot=14, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0023, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 0000fc98, size 3, enabled
map[14]: type 4, range 32, base 0000fca8, size 2, enabled
map[18]: type 4, range 32, base 0000fca0, size 3, enabled
map[1c]: type 4, range 32, base 0000fcac, size 2, enabled
map[20]: type 4, range 32, base 0000fc40, size 6, enabled
map[24]: type 1, range 32, base feac0000, size 17, enabled
found-> vendor=0x105a, dev=0x4d38, revid=0x01
bus=0, slot=15, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
found-> vendor=0x8086, dev=0x84c5, revid=0x05
bus=0, slot=20, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84c4, revid=0x06
bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84c4, revid=0x06
bus=0, slot=26, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
eisab0: <PCI-EISA bridge> at device 2.0 on pci0
eisa0: <EISA bus> on eisab0
mainboard0: <UNIa481 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on eisab0
atapci0: <GENERIC ATA controller> port 0xfcb0-0xfcbf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 3.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcb0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ahc0: <Adaptec 3950B Ultra2 SCSI adapter> port 0xf800-0xf8ff mem 0xfeaff000-0xfeafffff irq 11 at device 12.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfeaff000
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 418 instructions downloaded
ahc0: Features 0x76f6, Bugs 0x8, Flags 0x20485540
ahc0: [GIANT-LOCKED]
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3950B Ultra2 SCSI adapter> port 0xf400-0xf4ff mem 0xfeafe000-0xfeafefff irq 11 at device 12.1 on pci0
ahc1: Defaulting to MEMIO on
ahc1: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfeafe000
ahc1: Reading SEEPROM...done.
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 418 instructions downloaded
ahc1: Features 0x76f6, Bugs 0x8, Flags 0x28485540
ahc1: [GIANT-LOCKED]
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xfcc0-0xfcff irq 10 at device 13.0 on pci0
xl0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xfcc0
xl0: using port I/O
xl0: media options word: e040
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:60:08:62:18:91
xl0: [GIANT-LOCKED]
pci0: <display, VGA> at device 14.0 (no driver attached)
atapci1: <Promise PDC20262 UDMA66 controller> port 0xfc40-0xfc7f,0xfcac-0xfcaf,0xfca0-0xfca7,0xfca8-0xfcab,0xfc98-0xfc9f mem 0xfeac0000-0xfeadffff irq 5 at device 15.0 on pci0
atapci1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xfc40
atapci1: [MPSAFE]
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfc98
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfca8
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: at 0xfc98 on atapci1
ata2: [MPSAFE]
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfca0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfcac
ata3: reset tp1 mask=03 ostat0=00 ostat1=00
ata3-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata3-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata3: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata3: at 0xfca0 on atapci1
ata3: [MPSAFE]
pci0: <memory, RAM> at device 20.0 (no driver attached)
pcib1: <Intel 82454KX/GX (Orion) host to PCI bridge> at pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 64, base fcee0000, size 16, enabled
found-> vendor=0x14e4, dev=0x1645, revid=0x15
bus=1, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcee0000-0xfceeffff irq 5 at device 15.0 on pci1
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfcee0000
miibus1: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:08:02:ed:60:9b
bge0: [GIANT-LOCKED]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnpbios: 17 devices, largest 138 bytes
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0
PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 1 device ID PNP0501 (0105d041)
pnpbios: handle 2 device ID PNP0501 (0105d041)
pnpbios: handle 3 device ID PNP0401 (0104d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 4 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 5 device ID PNP0a03 (030ad041)
PNP0c01: adding memory range 0-0x9ffff, size=0xa0000, align=0
PNP0c01: adding memory range 0xe0000-0xfffff, size=0x20000, align=0
pnpbios: handle 6 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 7 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 9 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 10 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 11 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 12 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 13 device ID PNP0800 (0008d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 14 device ID PNP0f13 (130fd041)
PNP0c02: adding io range 0x48-0x4b, size=0x4, align=0
PNP0c02: adding io range 0x400-0x407, size=0x8, align=0
PNP0c02: adding io range 0x40a-0x40c, size=0x3, align=0
PNP0c02: adding io range 0x410-0x43f, size=0x30, align=0
PNP0c02: adding io range 0x461-0x462, size=0x2, align=0
PNP0c02: adding io range 0x464-0x465, size=0x2, align=0
PNP0c02: adding io range 0x481-0x48b, size=0xb, align=0
PNP0c02: adding io range 0x4c6-0x4c6, size=0x1, align=0
PNP0c02: adding io range 0x4ca-0x4ca, size=0x1, align=0
PNP0c02: adding io range 0x4ce-0x4ce, size=0x1, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x4d4-0x4d6, size=0x3, align=0
PNP0c02: adding io range 0x4e0-0x4ef, size=0x10, align=0
PNP0c02: adding io range 0x4f4-0x4ff, size=0xc, align=0
PNP0c02: adding io range 0xc80-0xc84, size=0x5, align=0
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
pnpbios: handle 16 device ID PNP0c02 (020cd041)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcf800-0xd0fff,0xcd800-0xcf7ff,0xc8000-0xcd7ff,0xc0000-0xc7fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x2001 0x2011 0x2001 0x2001
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x2001 0x2001 0x2001 0x2001
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <PNP0401> failed to probe on isa0
unknown: <PNP0700> failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0f13> failed to probe at irq 12 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 333342535 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ata2-master: setting PIO4 on Promise PDC20262 chip
ata2-master: setting UDMA66 on Promise PDC20262 chip
ad4: <Maxtor 6E040L0/NAR61590> ATA-7 disk at ata2-master
ad4: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA66
Waiting 2 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
GEOM: new disk ad4
[0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/5/63 s:0 l:80293248
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 0 length 41110142976 end 41110142975
GEOM: Configure ad4c, start 0 length 41110142976 end 41110142975
GEOM: Configure ad4d, start 0 length 20971520000 end 20971519999
GEOM: Configure ad4e, start 20971520000 length 20138622976 end 41110142975
GEOM: Configure ad4s1c, start 0 length 41110142976 end 41110142975
GEOM: Configure ad4s1d, start 0 length 20971520000 end 20971519999
GEOM: Configure ad4s1e, start 20971520000 length 20138622976 end 41110142975
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period c, offset 7f
(ahc0:A:0:0): Received SDTR period c, offset f
Filtered to period c, offset f
ahc0: target 0 synchronous at 20.0MHz, offset = 0xf
GEOM: new disk da0
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE SX118202LC B70C> Fixed Direct Access SCSI-2 device
da0: Serial Number LK385404 19161EZ6
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x00040011 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x00040011 LDR: 0x11000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x02000000 VER: 0x00040011 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 1
ioapic0: routing intpin 5 (IRQ 5) to cluster 1
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 10 (IRQ 10) to cluster 0
ioapic0: routing intpin 11 (IRQ 11) to cluster 1
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 1
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:35551782
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 18202512384 end 18202544639
GEOM: Configure da0s1a, start 0 length 15728640000 end 15728639999
GEOM: Configure da0s1b, start 15728640000 length 2473872384 end 18202512383
GEOM: Configure da0s1c, start 0 length 18202512384 end 18202512383
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
GEOM: Configure ad4c, start 0 length 41110142976 end 41110142975
GEOM: Configure ad4d, start 0 length 20971520000 end 20971519999
GEOM: Configure ad4e, start 20971520000 length 20138622976 end 41110142975
GEOM: Configure ad4c, start 0 length 41110142976 end 41110142975
GEOM: Configure ad4d, start 0 length 20971520000 end 20971519999
GEOM: Configure ad4e, start 20971520000 length 20138622976 end 41110142975
bge0: gigabit link up
Linux ELF exec handler installed
(da0:ahc0:0:0:0): Request Requeued
(da0:ahc0:0:0:0): Retrying Command
(da0:ahc0:0:0:0): Queue Full
(da0:ahc0:0:0:0): tagged openings now 64
(da0:ahc0:0:0:0): Retrying Command
[-- Attachment #3 --]
===============================================================================
MPTable, version 2.0.15
looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00
searching CMOS 'top of mem' @ 0x0009e400 (633K)
searching default 'top of mem' @ 0x0009fc00 (639K)
searching BIOS @ 0x000f0000
MP FPS found in BIOS @ physical addr: 0x000fdbc0
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000fdbc0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x4a
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009fd50
signature: 'PCMP'
base table length: 340
version: 1.4
checksum: 0xdd
OEM ID: 'UNISYS '
Product ID: 'Revol. 6X6'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 28
local APIC address: 0xfee00000
extended table length: 120
extended table checksum: 221
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
6 0x11 BSP, usable 6 3 2 0x183fbff
0 0x11 AP, usable 6 3 2 0x183fbff
1 0x11 AP, usable 6 3 2 0x183fbff
2 0x11 AP, usable 6 3 2 0x183fbff
4 0x11 AP, usable 6 3 2 0x183fbff
5 0x11 AP, usable 6 3 2 0x183fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 EISA
--
I/O APICs: APIC ID Version State Address
3 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 3 0
INT conforms conforms 2 1 3 1
INT conforms conforms 2 0 3 2
INT conforms conforms 2 3 3 3
INT conforms conforms 2 4 3 4
INT conforms conforms 2 5 3 5
INT conforms conforms 2 6 3 6
INT conforms conforms 2 7 3 7
INT conforms conforms 2 8 3 8
INT conforms conforms 2 9 3 9
INT conforms conforms 2 10 3 10
INT conforms conforms 2 11 3 11
INT conforms conforms 2 12 3 12
INT conforms conforms 2 13 3 13
INT conforms conforms 2 14 3 14
INT conforms conforms 2 15 3 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 255 0
NMI active-hi edge 0 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfd000000
address range: 0x1b00000
--
System Address Space
bus ID: 1 address type: memory address
address base: 0xfcee0000
address range: 0x10000
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 1 address type: I/O address
address base: 0x0
address range: 0x0
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x0
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
===============================================================================
[-- Attachment #4 --]
SMAP type=01 base=0000000000000000 len=000000000009e800
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f2798 len=000000000000d868
SMAP type=01 base=0000000000100000 len=000000000ff00000
SMAP type=02 base=00000000fec00000 len=0000000000001000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ffff2798 len=000000000000d868
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Sun May 16 22:13:40 GMT 2004
root@beast.nik.net:/usr/src/sys/i386/compile/BEAST
Preloaded elf kernel "/boot/kernel.new/kernel" at 0xc0710000.
Calibrating clock(s) ... i8254 clock: 1193153 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 333341670 Hz
CPU: Overdrive Pentium II/Pentium II Xeon/Celeron (333.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x1632 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000829000 - 0x000000000fb4ffff, 254963712 bytes (62247 pages)
avail memory = 257306624 (245 MB)
MP Configuration Table version 1.4 found at 0xc009fd50
APIC: Using the MPTable enumerator.
SMP: Added CPU 6 (BSP)
SMP: Added CPU 0 (AP)
SMP: Added CPU 1 (AP)
SMP: Added CPU 2 (AP)
SMP: Added CPU 4 (AP)
SMP: Added CPU 5 (AP)
MPTable: <UNISYS Revol. 6X6>
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 2, logical 0:2
APIC ID: physical 4, logical 0:3
APIC ID: physical 5, logical 1:0
APIC ID: physical 6, logical 1:1
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
cpu0 (BSP): APIC ID: 6
cpu1 (AP): APIC ID: 0
cpu2 (AP): APIC ID: 1
cpu3 (AP): APIC ID: 2
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
bios32: Found BIOS32 Service Directory header at 0xc00fdbd0
bios32: Entry = 0xf7cee (c00f7cee) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf7750+0xa10
pnpbios: Found PnP BIOS data at 0xc00fdbe0
pnpbios: Entry = f0000:6721 Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 5 trigger: level
ioapic0: intpin 5 polarity: low
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: high
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0: intpin 10 trigger: level
ioapic0: intpin 10 polarity: low
ioapic0: intpin 11 trigger: level
ioapic0: intpin 11 polarity: low
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: high
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: active-high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: active-high
ioapic0 <Version 1.1> irqs 0-15 on motherboard
cpu0 BSP:
ID: 0x06000000 VER: 0x00040011 LDR: 0x12000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
stray irq13
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a0c0
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 1 2 [class=000000] 3 [class=01018a] 4 5 6 7 8 9 10 11 12 [class=010000] [hdr=80] is there (id=00509005)
pcibios: BIOS version 2.10
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x15
bus=0, slot=2, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcb0, size 4, enabled
found-> vendor=0x10ad, dev=0x0105, revid=0x06
bus=0, slot=3, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0015, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000f800, size 8, enabled
map[14]: type 1, range 64, base feaff000, size 12, enabled
found-> vendor=0x9005, dev=0x0050, revid=0x00
bus=0, slot=12, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, port disabled
map[14]: type 1, range 64, base feafe000, size 12, memory disabled
found-> vendor=0x9005, dev=0x0050, revid=0x00
bus=0, slot=12, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0014, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000fcc0, size 6, port disabled
found-> vendor=0x10b7, dev=0x9050, revid=0x00
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
map[10]: type 3, range 32, base fd000000, size 24, enabled
found-> vendor=0x1013, dev=0x00b8, revid=0x00
bus=0, slot=14, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0023, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 0000fc98, size 3, enabled
map[14]: type 4, range 32, base 0000fca8, size 2, enabled
map[18]: type 4, range 32, base 0000fca0, size 3, enabled
map[1c]: type 4, range 32, base 0000fcac, size 2, enabled
map[20]: type 4, range 32, base 0000fc40, size 6, enabled
map[24]: type 1, range 32, base feac0000, size 17, enabled
found-> vendor=0x105a, dev=0x4d38, revid=0x01
bus=0, slot=15, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
found-> vendor=0x8086, dev=0x84c5, revid=0x05
bus=0, slot=20, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84c4, revid=0x06
bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84c4, revid=0x06
bus=0, slot=26, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
eisab0: <PCI-EISA bridge> at device 2.0 on pci0
eisa0: <EISA bus> on eisab0
mainboard0: <UNIa481 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on eisab0
atapci0: <GENERIC ATA controller> port 0xfcb0-0xfcbf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 3.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcb0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ahc0: <Adaptec 3950B Ultra2 SCSI adapter> port 0xf800-0xf8ff mem 0xfeaff000-0xfeafffff irq 11 at device 12.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfeaff000
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 418 instructions downloaded
ahc0: Features 0x76f6, Bugs 0x8, Flags 0x20485540
ahc0: [GIANT-LOCKED]
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3950B Ultra2 SCSI adapter> port 0xf400-0xf4ff mem 0xfeafe000-0xfeafefff irq 11 at device 12.1 on pci0
ahc1: Defaulting to MEMIO on
ahc1: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfeafe000
ahc1: Reading SEEPROM...done.
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 418 instructions downloaded
ahc1: Features 0x76f6, Bugs 0x8, Flags 0x20485540
ahc1: [GIANT-LOCKED]
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xfcc0-0xfcff irq 10 at device 13.0 on pci0
xl0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xfcc0
xl0: using port I/O
xl0: media options word: e040
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:60:08:62:18:91
xl0: [GIANT-LOCKED]
pci0: <display, VGA> at device 14.0 (no driver attached)
atapci1: <Promise PDC20262 UDMA66 controller> port 0xfc40-0xfc7f,0xfcac-0xfcaf,0xfca0-0xfca7,0xfca8-0xfcab,0xfc98-0xfc9f mem 0xfeac0000-0xfeadffff irq 5 at device 15.0 on pci0
atapci1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xfc40
atapci1: [MPSAFE]
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfc98
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfca8
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: at 0xfc98 on atapci1
ata2: [MPSAFE]
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfca0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfcac
ata3: reset tp1 mask=03 ostat0=00 ostat1=00
ata3-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata3-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata3: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata3: at 0xfca0 on atapci1
ata3: [MPSAFE]
pci0: <memory, RAM> at device 20.0 (no driver attached)
pcib1: <Intel 82454KX/GX (Orion) host to PCI bridge> at pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 64, base fcee0000, size 16, enabled
found-> vendor=0x14e4, dev=0x1645, revid=0x15
bus=1, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcee0000-0xfceeffff irq 5 at device 15.0 on pci1
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfcee0000
miibus1: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:08:02:ed:60:9b
bge0: [GIANT-LOCKED]
cpu0 on motherboard
cpu1 on motherboard
cpu2 on motherboard
cpu3 on motherboard
cpu4 on motherboard
cpu5 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnpbios: 17 devices, largest 138 bytes
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0
PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 1 device ID PNP0501 (0105d041)
pnpbios: handle 2 device ID PNP0501 (0105d041)
pnpbios: handle 3 device ID PNP0401 (0104d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 4 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 5 device ID PNP0a03 (030ad041)
PNP0c01: adding memory range 0-0x9ffff, size=0xa0000, align=0
PNP0c01: adding memory range 0xe0000-0xfffff, size=0x20000, align=0
pnpbios: handle 6 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 7 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 9 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 10 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 11 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 12 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 13 device ID PNP0800 (0008d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 14 device ID PNP0f13 (130fd041)
PNP0c02: adding io range 0x48-0x4b, size=0x4, align=0
PNP0c02: adding io range 0x400-0x407, size=0x8, align=0
PNP0c02: adding io range 0x40a-0x40c, size=0x3, align=0
PNP0c02: adding io range 0x410-0x43f, size=0x30, align=0
PNP0c02: adding io range 0x461-0x462, size=0x2, align=0
PNP0c02: adding io range 0x464-0x465, size=0x2, align=0
PNP0c02: adding io range 0x481-0x48b, size=0xb, align=0
PNP0c02: adding io range 0x4c6-0x4c6, size=0x1, align=0
PNP0c02: adding io range 0x4ca-0x4ca, size=0x1, align=0
PNP0c02: adding io range 0x4ce-0x4ce, size=0x1, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x4d4-0x4d6, size=0x3, align=0
PNP0c02: adding io range 0x4e0-0x4ef, size=0x10, align=0
PNP0c02: adding io range 0x4f4-0x4ff, size=0xc, align=0
PNP0c02: adding io range 0xc80-0xc84, size=0x5, align=0
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
pnpbios: handle 16 device ID PNP0c02 (020cd041)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcd800-0xcf7ff,0xc8000-0xcd7ff,0xc0000-0xc7fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x2001 0x2011 0x2001 0x2001
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x2001 0x2001 0x2001 0x2001
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <PNP0401> failed to probe on isa0
unknown: <PNP0700> failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0f13> failed to probe at irq 12 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 333341670 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040518195146.88092.qmail>