Date: Thu, 1 Jan 1998 14:34:09 +0000 From: Bob Bishop <rb@gid.co.uk> To: current@freebsd.org Subject: Crash dumps broken? Message-ID: <l0302090ab0d1573a3da6@[194.32.164.2]>
next in thread | raw e-mail | index | archive | help
Hi,
Crash dumps aren't currently working for me, as in:
dumping to dev 20401, offset 40960
dump 20 ..... 5
aha0: DMA beyond end of ISA: 0x1000000
device bad
This is ctm src-cur 3190. Any ideas?
Disk label:
# size offset fstype [fsize bsize bps/cpg]
a: 624640 0 4.2BSD 0 0 0 # (Cyl. 0 - 38*)
b: 81920 624640 swap # (Cyl. 38*- 43*)
c: 4225032 0 unused 0 0 # (Cyl. 0 - 262*)
e: 624640 706560 4.2BSD 0 0 0 # (Cyl. 43*- 82*)
f: 2893832 1331200 4.2BSD 0 0 0 # (Cyl. 82*- 262*)
dmesg:
FreeBSD 3.0-CURRENT #0: Thu Jan 1 12:55:21 GMT 1998
rb@hal:/source/cleansrc/sys/compile/HAL
CPU: Cyrix 486DX2 (486-class CPU)
Origin = "CyrixInstead" DIR=0x321b Stepping=3 Revision=2
real memory = 20971520 (20480K bytes)
avail memory = 17776640 (17360K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found
mse0 not found at 0x23c
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0: waiting for scsi devices to settle
scbus0 at aha0 bus 0
sd0 at scbus0 target 3 lun 0
sd0: <IBM DCAS-32160 S60B> type 0 fixed SCSI 2
sd0: Direct-Access 2063MB (4226725 512 byte sectors)
sd1 at scbus0 target 5 lun 0
sd1: <IOMEGA ZIP 100 J.02> type 0 removable SCSI 2
sd1: Direct-Access
sd1: ILLEGAL REQUEST asc:24,0 Invalid field in CDB
sd1 could not mode sense (4). Using ficticious geometry
sd1: NOT READY asc:3a,0 Medium not present
sd1: could not get size
Media parameters not available
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: aui/utp/bnc[*BNC*] address 00:a0:24:c4:f3:62
ex0 not found
le0 not probed due to I/O address conflict with ep0 at 0x300
lnc0 not found at 0x280
ze0 not probed due to I/O address conflict with ep0 at 0x300
zp0 not probed due to I/O address conflict with ep0 at 0x300
npx0 on motherboard
npx0: INT 16 interface
changing root device to sd0a
--
Bob Bishop (0118) 977 4017 international code +44 118
rb@gid.co.uk fax (0118) 989 4254 between 0800 and 1800 UK
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?l0302090ab0d1573a3da6>