Date: Mon, 17 Apr 2017 10:46:05 -0700 From: Adrian Chadd <adrian@freebsd.org> To: Zsolt SZASZ <zsolty_szasz@yahoo.com>, freebsd-wireless@freebsd.org Subject: Re: streaming with ath Message-ID: <CAJ-VmokSaHDHOVNS8o0Om7atMjd_7A92WqW-mBc2BVpuEO8XDA@mail.gmail.com> In-Reply-To: <445614309.2487658.1492450691731@mail.yahoo.com> References: <445614309.2487658.1492450691731.ref@mail.yahoo.com> <445614309.2487658.1492450691731@mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok. Its good to know its ampdu. Try enabling ampdu then disable ampdutx and test. Then enable ampdutx and disable ampdurx and try. Adrian On Apr 17, 2017 10:38 AM, "zsolty szasz" <zsolty_szasz@yahoo.com> wrote: > > With ifconfig wlan0 -ampdu it's stable in HT/40! I watched 2 movies > without issues. I observed its a little bit slow thought... lots of > loading's on TV... I checked with iperf from a laptop and all I got is > 33Mbit/sec although laptop is connected to 300Mbit/sec. Normally I got like > 16MB/sec in HT/40. > > I think we are on the right track :) > > > On Sunday, April 16, 2017 7:18 PM, Adrian Chadd <adrian.chadd@gmail.com> > wrote: > > > oh it's fine! the fact 11n fails but 11g dosn't is a good start. > > Do ifconfig wlan0 -ampdu and see if that makes a change. Clients will > have to reconnect first. > > > -adrian > > > On 16 April 2017 at 01:45, zsolty szasz <zsolty_szasz@yahoo.com> wrote: > > I switched to ht20 like this: ifconfig wlan0 channel 1:ht/20 - but > nothing > > had changed. TV disconnected after like 10 minutes of streaming. I really > > cant see any error messages. I mean nothing in dmesg or > /var/log/messages, > > besides the usual: ath0: stuck beacon; resetting (bmiss count 4). For > > streaming I am using minidlna, the only messages I receive is that the > > client disconnected form the streaming. Is there any debug tool in ath to > > turn on to check the reason why TV disconnected? > > > > Sorry, but that's all I know about wireless in freebsd, so please have > > patients with me. > > > > > > > > On Sunday, April 16, 2017 6:31 AM, Adrian Chadd <adrian.chadd@gmail.com> > > wrote: > > > > > > Is anything logged? > > > > Can you try HT20 instead of HT40 please? > > > > > > > > > > -adrian > > > > > > On 15 April 2017 at 05:32, zsolty szasz <zsolty_szasz@yahoo.com> wrote: > >> Hi Adrian, > >> I updated to head! But the problem is same. > >> > >> root@server:~ # uname -v > >> FreeBSD 12.0-CURRENT #0 r316577: Sun Apr 9 23:54:39 EEST 2017 > >> root@server:/usr/obj/usr/src/sys/GENERIC > >> > >> Television(s) disconnects from wifi for 10 seconds, checked with ping > >> while > >> streaming. Tell me what to do next please. > >> > >> > >> > >> On Monday, March 27, 2017 10:12 PM, Adrian Chadd < > adrian.chadd@gmail.com> > >> wrote: > >> > >> > >> hi, > >> > >> i fixed bugs in -head. please update! > >> > >> > >> -a > >> > >> > >> On 27 March 2017 at 10:28, zsolty szasz via freebsd-wireless > >> <freebsd-wireless@freebsd.org> wrote: > >>> Hello people, > >>> > >>> I have ar9227 in hostap mode in my home server. My config is: > >>> > >>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > >>> 1500 > >>> ether 30:b5:c2:63:51:77 > >>> inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255 > >>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > >>> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap> > >>> status: running > >>> ssid freebsdap channel 1 (2412 MHz 11g ht/40+) bssid > 30:b5:c2:63:51:77 > >>> regdomain 32924 country CN indoor ecm authmode WPA2/802.11i > >>> privacy MIXED deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit > >>> txpower 20 scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 8 > >>> shortgi wme burst dtimperiod 1 -dfs > >>> groups: wlan > >>> Server is running: 11.0-RELEASE-p8 > >>> I setup minidlna in the server. Problem is that my 2 TV-s (1xSamsung > and > >>> 1xLG) disconnects from wireless after a period of time while wathing > >>> movies. > >>> But, if I setup the wireless in the server in 11g then I can watch all > >>> movies from start to finish without problems. Sometimes the movies are > >>> buffering for a couple of seconds but are stable 100% in 11g mode. > Sadly > >>> not > >>> in 11n. > >>> > >>> Can you help me? What to check? Zsolt > >>> _______________________________________________ > >>> freebsd-wireless@freebsd.org mailing list > >>> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > >>> To unsubscribe, send any mail to > >>> "freebsd-wireless-unsubscribe@freebsd.org" > >> > >> > > > > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokSaHDHOVNS8o0Om7atMjd_7A92WqW-mBc2BVpuEO8XDA>