Date: Tue, 19 Dec 2000 13:08:25 -0700 From: Denver Maddux <denver@nitrous.net> To: freebsd-mobile@freebsd.org Subject: Re: Dell C800 experience Message-ID: <20001219130825.L7556@nitrous.net> In-Reply-To: <20001219110232.K7556@nitrous.net>; from denver@nitrous.net on Tue, Dec 19, 2000 at 11:02:39AM -0700 References: <20001219110232.K7556@nitrous.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
It looks like on 12/19/00 at 11:02, Denver Maddux may have said:
> 2/ Resume does not work properly on this laptop. For some reason I
> device at0 timeouts, and right as the system is about to become
> active again from suspend, it hangs and will not reboot gracefully.
<Eeek... poor English above aside!>
To be more precise, the output I get upon resume is:
ata0: resetting devices .. ata0-master: DMA limited to UDMA33,
non-ATA66 compliant cable
done
ad0: WRITE command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. <hang>
I have to remove all power to reboot.
I have a Dell Inspiron 5000 sitting right next to the C800 for comparison.
I've noticed some differences in hardware, such as the PCI bridge. The
HDD is also different (other than size):
Inspiron>
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
C800>
ad0: 30520MB <IBM-DJSA-232> [62010/16/63] at ata0-master BIOSDMA
This suspend issue may just be a problem with the HDD, but I'm open to
suggestions. Attached are a kernel config and dmesg output for the
laptop.
-Denver
[-- Attachment #2 --]
#
# $FreeBSD: src/sys/i386/conf/BRICK,v 1.0 2000/12/15 01:07:48 denver Exp $
machine i386
cpu I686_CPU
ident BRICK
maxusers 32
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options TCPDEBUG
options TCP_DROP_SYNFIN
options TCP_RESTRICT_RST
options "ICMP_BANDLIM"
options INCLUDE_CONFIG_FILE
options PCIC_RESUME_RESET
options PNPBIOS
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? flags 0x20
# PCCARD (PCMCIA) support
device card0
device pcic
#device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# ISA Ethernet NICs.
device ep
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
device wi
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty 256 # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ums # Mouse
# Sound support
device pcm
[-- Attachment #3 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #1: Mon Dec 18 01:52:38 MST 2000
denver@brick.nitrous.net:/usr/src/sys/compile/BRICK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (698.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201244672 (196528K bytes)
avail memory = 192843776 (188324K bytes)
Preloaded elf kernel "kernel" at 0xc02f6000.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=1131)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4d46 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x125d, dev=0x1998) at 3.0 irq 5
chip1: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device 15.0 on pci2
chip2: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device 15.1 on pci2
pci2: <unknown card> (vendor=0x104c, dev=0x8027) at 15.2 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xbfa0-0xbfaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <UHCI (generic) USB controller> port 0xdce0-0xdcff irq 11 at device 31.2 on pci0
uhci0: (New UHCI DeviceId=0x24428086)
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: (0x24428086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
ppc0: parallel port not found.
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 30520MB <IBM-DJSA-232> [62010/16/63] at ata0-master BIOSDMA
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001219130825.L7556>