Date: Thu, 13 Mar 2003 14:42:29 +1030 From: George Patterson <george@visp.com.au> To: Richard Arends <richard@unixguru.nl> Cc: current@FreeBSD.ORG Subject: Re: Panic after sleep. Message-ID: <20030313144229.69a54d0b.george@visp.com.au> In-Reply-To: <20030312095117.X80463@mail.unixguru.nl> References: <20030312095117.X80463@mail.unixguru.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
I experienced the same problem a couple of weeks ago. > uname -a FreeBSD george.spyderweb.com.au 5.0-RELEASE FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003 =20 root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386 The kernel panicked and then spontaneously rebooted. I had no time to record the error message. Regards George Patterson On Wed, 12 Mar 2003 10:01:45 +0100 (CET) Richard Arends <richard@unixguru.nl> wrote: > Hello, >=20 > My laptop paniced when he tried coming back from a sleep. This happens > a few times a week. >=20 > [snowlap] /var/crash$ uname -a > FreeBSD snowlap.unixguru.nl 5.0-CURRENT FreeBSD 5.0-CURRENT #1: Tue > Mar 11 15:11:05 CET 2003 > root@snowlap.unixguru.nl:/usr/obj/usr/src/sys/SNOWLAP i386 >=20 > Script started on Wed Mar 12 09:42:18 2003 > snowlap# g=07d=07b=07 -k kernel.11-03-2003 vmcore.0 > GNU gdb 5.2.1 (FreeBSD) > Copyright 2002 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and > you are welcome to change it and/or distribute copies of it under > certain conditions. Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for > details. This GDB was configured as "i386-undermydesk-freebsd"... > --- > Uptime: 36m36s > Terminate ACPI > Rebooting... > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.0-CURRENT #1: Tue Mar 11 15:11:05 CET 2003 > root@snowlap.unixguru.nl:/usr/obj/usr/src/sys/SNOWLAP > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0568000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05680a8. > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 797579512 Hz > CPU: Intel Pentium III (797.58-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6 > Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE, > MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory =3D 401997824 (383 MB) > avail memory =3D 384536576 (366 MB) > Pentium Pro MTRR support enabled > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <TOSHIB 750 > on motherboard > ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 > pcibios: BIOS version 2.10 > Using $PIR table, 7 entries at 0xc00f01c0 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-fast" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0 > acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 > acpi_tz0: <thermal zone> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem > 0xf0000000-0xf3ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI > bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > fxp0: <Intel Pro/100 Ethernet> port 0xdf40-0xdf7f mem > 0xf7dff000-0xf7dfffff irq 11 at device 8.0 on pci2 fxp0: Ethernet > address 00:00:39:be:6a:32 inphy0: <i82562ET 10/100 media interface> on > miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > cbb0: <TI1410 PCI-CardBus Bridge> at device 12.0 on pci2 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > pcib2: slot 12 INTA is routed to irq 11 > cbb1: <ToPIC100 PCI-CardBus Bridge> at device 13.0 on pci2 > cardbus1: <CardBus bus> on cbb1 > pccard1: <16-bit PCCard bus> on cbb1 > pcib2: slot 13 INTA is routed to irq 11 > cbb2: <ToPIC100 PCI-CardBus Bridge> at device 13.1 on pci2 > cardbus2: <CardBus bus> on cbb2 > pccard2: <16-bit PCCard bus> on cbb2 > pcib2: slot 13 INTB is routed to irq 11 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH2 UDMA100 controller> port 0xcff0-0xcfff at device > 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port > 0xcf80-0xcf9f irq 11 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM > (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port > 0xcf60-0xcf7f irq 11 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM > (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pcm0: <Intel 82801BA (ICH2)> port 0xcdc0-0xcdff,0xce00-0xceff irq 11 > at device 31.5 on pci0 pcm0: <unknown ac97 codec> (id=3D0x594d4800) > pci0: <simple comms> at device 31.6 (no driver attached) > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_cmbat0: <Control method Battery> on acpi0 > acpi_acad0: <AC adapter> on acpi0 > speaker0 port 0x61 on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes > threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/15 bytes threshold > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 Timecounters tick every 10.000 msec > IP Filter: v3.4.31 initialized. Default =3D block all, Logging =3D > enabled wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 > config 1 on pccard0 wi0: 802.11 address: 00:02:2d:12:a7:92 > wi0: using Lucent Embedded WaveLAN/IEEE > wi0: Lucent Firmware: Station (6.14.1) > wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > ad0: 19077MB <TOSHIBA MK2016GAP> [38760/16/63] at ata0-master UDMA66 > acd0: CD-RW <TOSHIBA DVD-ROM SD-R2002> at ata1-master PIO4 > pcm0: measured ac97 link rate at 5976 Hz > Mounting root from ufs:/dev/ad0s1a > wi0: promiscuous mode enabled > wi0: promiscuous mode disabled > lo0: promiscuous mode enabled > lo0: promiscuous mode disabled > lo0: promiscuous mode enabled > lo0: promiscuous mode disabled > lock order reversal > 1st 0xc343114c wi (802.11 link layer) @ > /usr/src/sys/net/if_ieee80211subr.c:239 2nd 0xc04650a0 bpf global > lock (bpf global lock) @ /usr/src/sys/net/bpf.c:1360 > Stack backtrace: > wi0: detached > wakeup from sleeping state (slept 10:24:51) > ata0: resetting devices .. > system power profile changed to 'economy' > done > panic: ata_dmasetup: transfer active on this device! >=20 > syncing disks, buffers remaining... panic: bremfree: bp 0xcae09a38 not > locked Uptime: 2h56m45s > Dumping 383 MB > ata0: resetting devices .. > done > 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 272 288 304 > 320 336 352 368 > --- > #0 doadump () at /usr/src/sys/kern/kern_shutdown.c:239 > 239 dumping++; > (kgdb) where > #0 doadump () at /usr/src/sys/kern/kern_shutdown.c:239 > #1 0xc022e017 in boot (howto=3D260) at > /usr/src/sys/kern/kern_shutdown.c:371#2 0xc022e283 in panic () at > /usr/src/sys/kern/kern_shutdown.c:542#3 0xc026ff17 in bremfreel > (bp=3D0xcae09a38) at /usr/src/sys/kern/vfs_bio.c:683#4 0xc026fe85 in > bremfree (bp=3D0x0) at /usr/src/sys/kern/vfs_bio.c:670#5 0xc0273458 in > getblk (vp=3D0xc3443000, blkno=3D256128, size=3D16384, slpflag=3D0, > slptimeo=3D0) at /usr/src/sys/kern/vfs_bio.c:2527#6 0xc027004a in > breadn (vp=3D0xc3443000, blkno=3D0, size=3D0, rablkno=3D0x0, rabsize=3D0x= 0, > cnt=3D0, cred=3D0x0, bpp=3D0x0) at /usr/src/sys/kern/vfs_bio.c:741#7=20 > 0xc026fffc in bread (vp=3D0x0, blkno=3D0, size=3D0, cred=3D0x0, bpp=3D0x0= ) at > /usr/src/sys/kern/vfs_bio.c:723#8 0xc030f473 in ffs_update > (vp=3D0xc36c5000, waitfor=3D0) at /usr/src/sys/ufs/ffs/ffs_inode.c:102#9= =20 > 0xc032427f in ffs_fsync (ap=3D0xd79d7838) at > /usr/src/sys/ufs/ffs/ffs_vnops.c:314#10 0xc03232fe in ffs_sync > (mp=3D0xc342d000, waitfor=3D2, cred=3D0xc11dce80, td=3D0xc0403200) at > vnode_if.h:612#11 0xc02852db in sync (td=3D0xc0403200, uap=3D0x0) at > /usr/src/sys/kern/vfs_syscalls.c:138#12 0xc022dc1c in boot (howto=3D256) > at /usr/src/sys/kern/kern_shutdown.c:280#13 0xc022e283 in panic () at > /usr/src/sys/kern/kern_shutdown.c:542#14 0xc0150863 in ata_dmastart > (atadev=3D0x0, data=3D0x0, count=3D0, dir=3D0) at > /usr/src/sys/dev/ata/ata-dma.c:254#15 0xc0151b31 in ad_transfer > (request=3D0xc38dc640) at /usr/src/sys/dev/ata/ata-disk.c:494#16 > 0xc0143719 in ata_start (ch=3D0xc32e4e00) at > /usr/src/sys/dev/ata/ata-all.c:686#17 0xc01443c7 in ata_reinit > (ch=3D0xc32e4e00) at /usr/src/sys/dev/ata/ata-all.c:935#18 0xc0142a11 in > ata_resume (dev=3D0x0) at /usr/src/sys/dev/ata/ata-all.c:301#19 > 0xc0243dcd in bus_generic_resume (dev=3D0x0) at device_if.h:75#20 > 0xc0243dcd in bus_generic_resume (dev=3D0x0) at device_if.h:75#21 > 0xc0243dcd in bus_generic_resume (dev=3D0x0) at device_if.h:75#22 > 0xc054b3aa in ?? ()#23 0xc0243dcd in bus_generic_resume (dev=3D0x0) at > device_if.h:75#24 0xc0243dcd in bus_generic_resume (dev=3D0x0) at > device_if.h:75#25 0xc0243dcd in bus_generic_resume (dev=3D0x0) at > device_if.h:75#26 0xc05455e9 in ?? () > #27 0xc0545f45 in ?? () > #28 0xc01f63ae in spec_ioctl (ap=3D0x0) at > /usr/src/sys/fs/specfs/spec_vnops.c:349#29 0xc01f5af8 in > spec_vnoperate (ap=3D0x0) at /usr/src/sys/fs/specfs/spec_vnops.c:123#30 > 0xc028d7b1 in vn_ioctl (fp=3D0xc37aa7bc, com=3D2147766275, > data=3D0xd79d7c54, active_cred=3D0xc353a080, td=3D0xc36883c0) at > vnode_if.h:488#31 0xc0251f29 in ioctl (td=3D0xc36883c0, uap=3D0xd79d7d10) > at file.h:251#32 0xc037df0e in syscall (frame=3D > {tf_fs =3D 47, tf_es =3D 47, tf_ds =3D 47, tf_edi =3D 3, tf_esi =3D= 3, > tf_ebp =3D -1077937176, tf_isp =3D -677544588, tf_ebx =3D 3, tf_edx= =3D > 0, tf_ecx =3D -1077937076, tf_eax =3D 54, tf_trapno =3D 12, tf_err = =3D > 2, tf_eip =3D 671820323, tf_cs =3D 31, tf_eflags =3D 531, tf_esp =3D > -1077937204, tf_ss =3D 47}) at /usr/src/sys/i386/i386/trap.c:1030 > #33 0xc036dd7d in Xint0x80_syscall () at {standard input}:138 > ---Can't read userspace from dump, or kernel process--- >=20 > (kgdb) quit > snowlap# ^D=08=08exit >=20 > Script done on Wed Mar 12 09:45:02 2003 >=20 > Regards, >=20 > Richard. >=20 > ---- > Paul Vixie in an interview with Sendmail.net: >=20 > Now that the Internet has the full spectrum of humanity as users, > the technology is showing its weakness: it was designed to be > used by friendly, smart people. Spammers, as an example of a class, > are neither friendly nor smart. >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message >=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030313144229.69a54d0b.george>