Date: Thu, 05 Sep 2002 02:34:22 +0900 From: Hiroharu Tamaru <tamaru@myn.rcast.u-tokyo.ac.jp> To: Ruslan <FreeBSD@FromRU.com> Cc: freebsd-smp@FreeBSD.ORG Subject: Re: AMD760MPX and FreeBSD SMP? Message-ID: <sa6r8g9fyld.wl@gin.myn.rcast.u-tokyo.ac.jp> In-Reply-To: <442159807.20020904152900@FromRU.com> References: <442159807.20020904152900@FromRU.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Multipart_Thu_Sep__5_02:34:22_2002-1
Content-Type: text/plain; charset=US-ASCII
I'm running one.
Tiger MPX S2466N-4M with two Athlon XP 1500+ MP and
3GB(1+1+.5+.5) of RAM. FreeBSD 4.5-stable to 4.6-stable. I
have not tried all the onboard features but basically had no
trouble. boot dmesg (a diskless tested with 4.6-prerelease
kernel) attached.
One thing I personally missed is that the on board NIC does not
support WOL feature to wake from S5 (they claim it does from S3, on
windows, but not S5).
At Wed, 4 Sep 2002 15:29:00 +0400,
Ruslan wrote:
>
> Hello,
>
> Subj. Is it possible?
> If you run FreeBSD on a DUAL AMD Athlon box, plz tell
> me about your configuration.
> I'm planning to buy Tyan Tiger S2466N-4M (AMD-760 MPX based MB) + 2
> Athlon XP procs.
> Any info would be greatly appreciated.
>
> --
> Best regards,
> Ruslan Morozoff mailto:FreeBSD@FromRU.com
--Multipart_Thu_Sep__5_02:34:22_2002-1
Content-Type: text/plain; charset=US-ASCII
Content-Disposition: attachment; filename="dmesg.boot"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-PRERELEASE #0: Tue May 14 01:10:08 JST 2002
tamaru@localhost:/w/4src/src/sys/compile/TWE
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) MP 1500+ (1333.39-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 3220701184 (3145216K bytes)
avail memory = 3133829120 (3060380K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel.test" at 0xc044c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc044c0a4.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00fdf00
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0111 graphics accelerator> at 5.0 irq 11
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 ATA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xe9000000-0xe9000fff irq 10 at device 0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0xe9001000-0xe900107f irq 10 at device 8.0 on pci2
xl0: Ethernet address: 00:e0:81:20:d5:a5
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xccfff,0xdc000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
Mounting root from nfs:
SMP: AP CPU #1 Launched!
NFS ROOT: 10.0.0.1:/nfsroot
--Multipart_Thu_Sep__5_02:34:22_2002-1--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?sa6r8g9fyld.wl>