Date: Thu, 23 Jun 2011 14:47:00 +0200 From: Sebastian Anding <kb@cccmz.de> To: FreeBSD Stable <freebsd-stable@freebsd.org> Subject: 8 Stable won't boot into zfs with underlying geli layer amd64 Message-ID: <20110623144700.7679a699@jf.bluem00n.gotdns.org>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hi,
i tried to switch to 8.0 stable. I checkout the src-all with cvsup 3
days ago.
After make buildworld, make buildkernel and make installkernel, I booted
into the new system. But now I'm not asked for the geli passphrases.
That results in the kernel not beeing able to mount the root vfs. The
keyboard (USB) is not responding anymore and so I'm not able to set
parameters after the root fs went missing, or produce a dmesg.
I guess that the discs are not detected anymore.
My setup can be seen in the attached files. There are one freebsd-swap
and one freebsd-zfs gpart partition on each disc. The gpart partitions
freebsd-zfs are encrypted with geli. I attach the dmesg of the Generic
8.2 release kernel too.
Has there been changes, which can result in behaviour described above?
So far,
Sebastian
[-- Attachment #2 --]
=> 34 3907029101 ad4 GPT (1.8T)
34 2048034 1 freebsd-swap (1.0G)
2048068 3904981067 2 freebsd-zfs (1.8T)
=> 34 3907029101 ad5 GPT (1.8T)
34 2048034 1 freebsd-swap (1.0G)
2048068 3904981067 2 freebsd-zfs (1.8T)
=> 34 3907029101 ad6 GPT (1.8T)
34 2048034 1 freebsd-swap (1.0G)
2048068 3904981067 2 freebsd-zfs (1.8T)
=> 34 15646653 da0 GPT (7.5G)
34 32 1 freebsd-boot (16K)
66 15646621 2 freebsd-ufs (7.5G)
=> 34 3907029101 ad7 GPT (1.8T)
34 2048034 1 freebsd-swap (1.0G)
2048068 3904981067 2 freebsd-zfs (1.8T)
[-- Attachment #3 --]
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #0: Thu Feb 17 02:41:51 UTC 2011
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.09-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Family = f Model = 4 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,CX16,xTPR>
AMD Features=0x20100800<SYSCALL,NX,LM>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 3861712896 (3682 MB)
ACPI APIC Table: <DELL PESC430>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PESC430> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, f00000 (3) failed
acpi0: reservation of 1000000, eee8cc00 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004001> mem 0xfe8f0000-0xfe8fffff irq 17 at device 0.0 on pci4
bge0: CHIP ID 0x00004001; ASIC REV 0x04; CHIP REV 0x40; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:12:3f:75:db:bf
bge0: [ITHREAD]
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x3000
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 2.0 on pci5
pci6: <PCI bus> on pcib6
pci6: <bridge> at device 0.0 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xfe4e0000-0xfe4e7fff irq 19 at device 0.1 on pci6
miibus1: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:ef:0d:88
hme0: [ITHREAD]
pci6: <bridge> at device 1.0 (no driver attached)
hme1: <Sun HME 10/100 Ethernet> mem 0xfe4e8000-0xfe4effff irq 16 at device 1.1 on pci6
miibus2: <MII bus> on hme1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: 08:00:20:ef:0d:89
hme1: [ITHREAD]
pci6: <bridge> at device 2.0 (no driver attached)
hme2: <Sun HME 10/100 Ethernet> mem 0xfe4f0000-0xfe4f7fff irq 17 at device 2.1 on pci6
miibus3: <MII bus> on hme2
ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus3
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme2: Ethernet address: 08:00:20:ef:0d:8a
hme2: [ITHREAD]
pci6: <bridge> at device 3.0 (no driver attached)
hme3: <Sun HME 10/100 Ethernet> mem 0xfe4f8000-0xfe4fffff irq 18 at device 3.1 on pci6
miibus4: <MII bus> on hme3
ukphy3: <Generic IEEE 802.3u media interface> PHY 1 on miibus4
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme3: Ethernet address: 08:00:20:ef:0d:8b
hme3: [ITHREAD]
vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xf6000000-0xf7ffffff,0xfe6c0000-0xfe6fffff at device 7.0 on pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff,0xca000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS filesystem version 4
ZFS storage pool version 15
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: DVDROM <HL-DT-STDVD-ROM GDR8163B/0D20> at ata0-master UDMA33
ad4: 1907729MB <WDC WD20EARS-00MVWB0 51.0AB51> at ata2-master UDMA100 SATA
ad5: 1907729MB <WDC WD20EARS-00MVWB0 51.0AB51> at ata2-slave UDMA100 SATA
ad6: 1907729MB <WDC WD20EARS-00MVWB0 51.0AB51> at ata3-master UDMA100 SATA
Enter passphrase for ad4p2: uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <vendor 0x13fe> at usbus4
umass0: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: < USB DISK 2.0 DL07> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 7640MB (15646720 512 byte sectors: 255H 63S/T 973C)
ugen3.2: <DELL> at usbus3
ukbd0: <DELL Dell QuietKey Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus3
kbd2 at ukbd0
ad7: 1907729MB <WDC WD20EARS-00MVWB0 51.0AB51> at ata3-slave UDMA100 SATA
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
GEOM_ELI: Device ad4p2.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Enter passphrase for ad5p2:
GEOM_ELI: Device ad5p2.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Enter passphrase for ad6p2:
GEOM_ELI: Device ad6p2.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Enter passphrase for ad7p2:
GEOM_ELI: Device ad7p2.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Trying to mount root from zfs:tank
GEOM_ELI: Device ad4p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
GEOM_ELI: Device ad5p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
GEOM_ELI: Device ad6p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
GEOM_ELI: Device ad7p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
hme0: link state changed to UP
hme0: link state changed to DOWN
hme0: link state changed to UP
hme0: link state changed to DOWN
hme0: link state changed to UP
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110623144700.7679a699>