Date: Tue, 31 Aug 2004 09:28:26 +0530 From: Subhro <subhro.kar@gmail.com> To: "freebsd-questions@FreeBSD. ORG" <freebsd-questions@freebsd.org> Cc: michael <cripticcorp@cripticcorp.net> Subject: Re: burncd problem err=16 any ideas? Message-ID: <b2807d04040830205827c0237e@mail.gmail.com> In-Reply-To: <4133E689.2050801@cripticcorp.net> References: <41339496.2070807@cripticcorp.net> <b2807d04040830185746c669d0@mail.gmail.com> <4133E689.2050801@cripticcorp.net>
next in thread | previous in thread | raw e-mail | index | archive | help
What type of ATA cable are you using? The 40 conductor type or the 80 conductor type? Does your burner support some kind of underburn protection? Could you paste "sysctl -a | grep dma" without the "s ? FreeBSD requires IDE drives to be fixed on the cable in a particular order, ie the master drive goes in one end and the slave comes in the middle. It is recommended not to reply on CS and assign the drives to be master/slave the hard way, err I meant the manual way. Also if you intend to burn CDs/DVDs "on the fly" then the source and the destination drives should not be on the same Bus. Could you tell us about your setup? Regards S. On Mon, 30 Aug 2004 21:46:33 -0500, michael <cripticcorp@cripticcorp.net> wrote: > On another note too, it is burning part of the cd, on my attempts i > think i completed about 20% maximum, something missing or not enabled in > the kernel would still cause this ? > > > > >Are you running the GENERIC kernel? If not have you included support > >for the CD file system? Also did you put something non standard in > >/etc/make.conf? > > > >Regards > >S. > > > >On Mon, 30 Aug 2004 15:56:54 -0500, michael <cripticcorp@cripticcorp.net> wrote: > > > > > >>Im running freebsd 4.10 with a sony cd/dvd burner combo (DRU-530A) im > >>using burncd -f /dev/acd0c -s max -e data imagefile.iso fixate , i have > >>tried to lower the speed to 1x and 8x and i get the same problem ill > >>include the error with -v verabos output maybe it will help ( does > >>burncd log somewhere there might be more about the error message that > >>might help this problem out? ) > >> > >>adding type 0x08 file permfiles.iso size 8992 KB 4496 blocks > >>next writeable LBA 0 > >>addr = 0 size = 9207808 blocks = 4496 > >>writing from file permfiles.iso size 8992 KB > >>written this track 1056 KB (11%) total 1056 KB > >>only wrote -1 of 32768 bytes err=16 > >> > >>fixating CD, please wait.. > >> > >>I have also tried to cat imagefile.iso > /dev/acd0c so i could then just > >>fixate with burncd but i get this error > >> > >>cat: stdout: Input/output error > >> > >>i looked in my /var/log/messages and found this it might help you guys out > >> > >>Aug 30 15:20:49 cripticcorp /kernel: acd0: READ_TRACK_INFO - ILLEGAL > >>REQUEST asc=0x24 ascq=0x00 error=0x04 > >> > >>Aug 30 15:21:06 cripticcorp /kernel: acd0: WRITE_BIG - ILLEGAL REQUEST > >>asc=0x30 ascq=0x05 error=0x04 > >> > >>Aug 30 15:22:05 cripticcorp /kernel: acd0: WRITE_BIG - ILLEGAL REQUEST > >>asc=0x21 ascq=0x00 error=0x04 > >> > >>Aug 30 15:23:07 cripticcorp /kernel: acd0: SEND_OPC_INFO command timeout > >>- resetting > >> > >>Aug 30 15:23:07 cripticcorp /kernel: ata1: resetting devices .. done > >> > >>Aug 30 15:23:37 cripticcorp /kernel: acd0: READ_TRACK_INFO command > >>timeout - resetting > >> > >>Aug 30 15:23:37 cripticcorp /kernel: ata1: resetting devices .. done > >> > >>Aug 30 15:23:37 cripticcorp /kernel: acd0: READ_TRACK_INFO - ILLEGAL > >>REQUEST asc=0x20 ascq=0x00 error=0x04 > >> > >>Aug 30 15:26:52 cripticcorp /kernel: acd0: REZERO command timeout - > >>resetting > >> > >>Aug 30 15:26:52 cripticcorp /kernel: ata1: resetting devices .. done > >> > >>Aug 30 15:27:23 cripticcorp /kernel: acd0: SEND_OPC_INFO command timeout > >>- resetting > >> > >>Aug 30 15:27:23 cripticcorp /kernel: ata1: resetting devices .. done > >> > >>Aug 30 15:27:53 cripticcorp /kernel: acd0: READ_TRACK_INFO command > >>timeout - resetting > >> > >>Aug 30 15:27:53 cripticcorp /kernel: ata1: resetting devices .. done > >> > >>Aug 30 15:27:53 cripticcorp /kernel: acd0: READ_TRACK_INFO - ILLEGAL > >>REQUEST asc=0x20 ascq=0x00 error=0x04 > >> > >>Also one last thing in my /dev i have a acd0c and acd0a is this Cd and DVD ? > >> > >>Any ideas would be helpful. > >> > >>Michael W. > >>criptic@cripticcorp.net > >> > >>_______________________________________________ > >>freebsd-questions@freebsd.org mailing list > >>http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >>To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > >> > >> > >> > > > > > > > > > > -- Subhro Sankha Kar School of Information Technology Block AQ-13/1 Sector V ZIP 700091 India
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b2807d04040830205827c0237e>