Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 19 Jan 2003 18:25:10 -0700
From:      "Russell L. Carter" <rcarter@pinyon.org>
To:        freebsd-current@freebsd.org
Subject:   Re: STABLE->CURRENT rl fails 
Message-ID:  <20030120012510.ED890319@pinyon.org>
In-Reply-To: Message from "Russell L. Carter" <rcarter@pinyon.org>  of "Sat, 18 Jan 2003 11:29:40 MST." <20030118182940.D9B87147@pinyon.org> 

next in thread | previous in thread | raw e-mail | index | archive | help

Ok-dokey, over to linux it goes.  Rats.

Russell


: 
: 
: Perhaps there's a nice search string that will cough up what
: to do, if there's hope?  This laptop is perfectly stable with 
: STABLE.  (But no sound or acpi...)
: 
: Thanks,
: Russell
: 
: 
: 
: : Trial upgrade from a laptop running stable just fine for the last
: : six months to current (GENERIC) is still failing with the same symptoms:
: : 
: : On board rl0 comes up just fine, but a transfer hangs 
: : after about 150KB or so.  After a minute or two, the laptop reboots.
: : 
: : That's at 100BaseTX, plus the various mediaopts.  At 10BaseT,
: : it takes longer during a file transfer to trigger the problem, but
: : it gets there after a megabyte or so.
: : 
: : I've attached a dmesg, interesting "lock order reversal" item in it.
: : 
: : I'm willing to dedicate a week or so to get this thing up because it's
: : one of those ACPI only laptops.
: : 
: : Tell me what to do to get better info...
: : 
: : Thank you,
: : Russell
: : 
: : 
: : Copyright (c) 1992-2003 The FreeBSD Project.
: : Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
: : 	The Regents of the University of California. All rights reserved.
: : FreeBSD 5.0-CURRENT #0: Fri Jan 17 08:55:47 MST 2003
: :     root@chomsky.hq.pinyon.org:/usr/obj/usr/src-current/src/sys/GENERIC
: : Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c3000.
: : Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c30a8.
: : Timecounter "i8254"  frequency 1193182 Hz
: : Timecounter "TSC"  frequency 1991920132 Hz
: : CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (1991.92-MHz 686-class CPU)
: :   Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
: :   Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
: : PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
: : real memory  = 520093696 (496 MB)
: : avail memory = 497917952 (474 MB)
: : Initializing GEOMetry subsystem
: : Pentium Pro MTRR support enabled
: : npx0: <math processor> on motherboard
: : npx0: INT 16 interface
: : acpi0: <PTLTD    RSDT  > on motherboard
: :     ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
: :     ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
: : Using $PIR table, 7 entries at 0xc00fdf50
: : Timecounter "ACPI-fast"  frequency 3579545 Hz
: : acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
: : acpi_cpu0: <CPU> on acpi0
: : acpi_tz0: <thermal zone> on acpi0
: : pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
: : pci0: <ACPI PCI bus> on pcib0
: : agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xe8ffffff at device 0.0 
: : on pci0
: : pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
: : pci1: <PCI bus> on pcib1
: : pci1: <display, VGA> at device 0.0 (no driver attached)
: : isab0: <PCI-ISA bridge> at device 2.0 on pci0
: : isa0: <ISA bus> on isab0
: : ohci0: <SiS 5571 USB controller> mem 0xe9000000-0xe9000fff irq 11 at device 
: : 2.2 on pci0
: : usb0: OHCI version 1.0, legacy support
: : usb0: SMM does not respond, resetting
: : usb0: <SiS 5571 USB controller> on ohci0
: : usb0: USB revision 1.0
: : uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
: : uhub0: 2 ports with 2 removable, self powered
: : ums0: Mitsumi Mitsumi Quick Scroll Mouse (USB), rev 1.00/1.05, addr 2, iclass 
: : 3/1
: : ums0: 3 buttons and Z dir.
: : ohci1: <SiS 5571 USB controller> mem 0xe9001000-0xe9001fff irq 10 at device 
: : 2.3 on pci0
: : usb1: OHCI version 1.0, legacy support
: : usb1: <SiS 5571 USB controller> on ohci1
: : usb1: USB revision 1.0
: : uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
: : uhub1: 2 ports with 2 removable, self powered
: : atapci0: <SiS 5591 ATA100 controller> port 0x1000-0x100f at device 2.5 on pci0
: : ata0: at 0x1f0 irq 14 on atapci0
: : ata1: at 0x170 irq 15 on atapci0
: : pci0: <multimedia, audio> at device 2.7 (no driver attached)
: : rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0x6004800-0x60048ff 
: : irq 11 at device 10.0 on pci0
: : rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
: : rl0: Ethernet address: 00:90:f5:12:59:3b
: : miibus0: <MII bus> on rl0
: : rlphy0: <RealTek internal media interface> on miibus0
: : rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
: : pci0: <serial bus, FireWire> at device 11.0 (no driver attached)
: : cbb0: <TI1410 PCI-CardBus Bridge> mem 0x88000000-0x88000fff irq 5 at device 
: : 12.0 on pci0
: : cardbus0: <CardBus bus> on cbb0
: : pccard0: <16-bit PCCard bus> on cbb0
: : acpi_button0: <Power Button> on acpi0
: : acpi_button1: <Sleep Button> on acpi0
: : acpi_acad0: <AC adapter> on acpi0
: : acpi_cmbat0: <Control method Battery> on acpi0
: : acpi_lid0: <Control Method Lid Switch> on acpi0
: : atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
: : atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
: : kbd0 at atkbd0
: : psm0: <PS/2 Mouse> irq 12 on atkbdc0
: : psm0: model Generic PS/2 mouse, device ID 0
: : sio0 port 0x3f8-0x3ff irq 4 on acpi0
: : sio0: type 16550A
: : acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
: : orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0
: : pmtimer0 on isa0
: : fdc0: cannot reserve I/O port range (6 ports)
: : ppc0: parallel port not found.
: : sc0: <System console> at flags 0x100 on isa0
: : sc0: VGA <16 virtual consoles, flags=0x300>
: : sio1: configured irq 3 not in bitmap of probed irqs 0
: : sio1: port may not be enabled
: : vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
: : Timecounters tick every 10.000 msec
: : acpi_cpu: CPU throttling available, 8 steps from 100% to 12.5%
: : ad0: 28615MB <TOSHIBA MK3017GAP> [58140/16/63] at ata0-master UDMA100
: : acd0: CD-RW <DW-28E> at ata1-master PIO4
: : Mounting root from ufs:/dev/ad0s1a
: : lock order reversal
: :  1st 0xc4013068 process lock (process lock) @ /usr/src-current/src/sys/kern/ker
: : n_descrip.c:2100
: :  2nd 0xc4030134 filedesc structure (filedesc structure) @ 
: : /usr/src-current/src/sys/kern/kern_descrip.c:2107
: : rl0: discard oversize frame (ether type fbf7 flags 3 len 2992 > max 1514)
: : rl0: discard oversize frame (ether type fbf7 flags 3 len 2992 > max 1514)
: : rl0: discard oversize frame (ether type 2e3d flags 3 len 55442 > max 1514)
: : rl0: discard oversize frame (ether type 904 flags 3 len 36106 > max 1514)
: : 
: : Fatal trap 12: page fault while in kernel mode
: : fault virtual address	= 0x46
: : fault code		= supervisor read, page not present
: : instruction pointer	= 0x8:0xc02f19c0
: : stack pointer	        = 0x10:0xd9344ca4
: : frame pointer	        = 0x10:0xd9344cbc
: : code segment		= base 0x0, limit 0xfffff, type 0x1b
: : 			= DPL 0, pres 1, def32 1, gran 1
: : processor eflags	= interrupt enabled, resume, IOPL = 0
: : current process		= 832 (reboot)
: : trap number		= 12
: : panic: page fault
: : 
: : 
: : 
: : To Unsubscribe: send mail to majordomo@FreeBSD.org
: : with "unsubscribe freebsd-current" in the body of the message
: 
: 
: 
: To Unsubscribe: send mail to majordomo@FreeBSD.org
: with "unsubscribe freebsd-current" in the body of the message



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030120012510.ED890319>