Date: Sat, 14 Jun 2014 10:06:17 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: Mike Tancsa <mike@sentex.net> Cc: hackers@freebsd.org Subject: Re: iPXE booting latest PCengines alu board Message-ID: <5FA602AC-C827-4727-A038-B96FBEF8E6AB@cs.huji.ac.il> In-Reply-To: <539B47C0.2050400@sentex.net> References: <9D14C4BD-8A13-43FC-ACDA-0315A58CEBC6@cs.huji.ac.il> <5399C6A0.9010506@sentex.net> <A6728A0C-1420-47B4-8A0D-325A5C0644E0@cs.huji.ac.il> <539B47C0.2050400@sentex.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jun 13, 2014, at 9:49 PM, Mike Tancsa <mike@sentex.net> wrote: > On 6/13/2014 4:24 AM, Daniel Braniss wrote: >>=20 >> On Jun 12, 2014, at 6:26 PM, Mike Tancsa <mike@sentex.net >> <mailto:mike@sentex.net>> wrote: >>> If you mean http://www.pcengines.ch/apu.htm, just make sure you are >>> booting a relatively recent FreeBSD version (newer than April I >>=20 >> no, it does not :-(, the bios has iPXE not PXE - notice the little i) >> after hitting ^B i managed some progress: >> FreeBSD 7.0-RC1 #41: Sun Dec 30 15:19:13 IST 2007 >=20 > When I said newer than April, I meant newer than April 2014. You = really need to boot 7.0 ?? you should have read the end of that message :-) ... and here it hung. ok, so this is a very old kernel, which got selected by default, (just shows how old the default is :-), but when I set it to = boot 9.3-BETA2 via the latest pxeboot it hangs just after = initialising the BTX. can you send me your ipxe script, maybe I can figure out what i=92m doing wrong? thanks, danny >=20 > I am netbooting RELENG_10 just fine >=20 > # head -20 /var/run/dmesg.boot > Copyright (c) 1992-2014 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.0-STABLE #1 r262980M: Mon Mar 10 16:54:07 EDT 2014 > = mdtancsa@ich10.sentex.ca:/home/pxe10/usr/obj/home/pxe10/usr/src/sys/GENERI= C i386 > FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 > CPU: AMD G-T40E Processor (1000.02-MHz 686-class CPU) > Origin =3D "AuthenticAMD" Id =3D 0x500f20 Family =3D 0x14 Model =3D = 0x2 Stepping =3D 0 > = Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=3D0x802209<SSE3,MON,SSSE3,CX16,POPCNT> > AMD Features=3D0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> > AMD = Features2=3D0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKI= NIT,WDT> > TSC: P-state invariant, performance statistics > real memory =3D 3741364224 (3568 MB) > avail memory =3D 3652464640 (3483 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <CORE COREBOOT> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) >=20 >=20 >=20 >=20 > Searching bootorder for: /rom@genroms/pxeboot.rom > Press F12 for boot menu. >=20 > drive 0x000fd910: PCHS=3D0/0/0 translation=3Dlba LCHS=3D957/64/63 = s=3D3862528 > drive 0x000fd940: PCHS=3D16383/16/63 translation=3Dlba = LCHS=3D1024/255/63 s=3D61865984 > Space available for UMB: 000c1000-000ee000 > Returned 49152 bytes of ZoneHigh > e820 map has 6 items: > 0: 0000000000000000 - 000000000009fc00 =3D 1 RAM > 1: 000000000009fc00 - 00000000000a0000 =3D 2 RESERVED > 2: 00000000000f0000 - 0000000000100000 =3D 2 RESERVED > 3: 0000000000100000 - 000000007e16ac00 =3D 1 RAM > 4: 000000007e16ac00 - 000000007efffc00 =3D 2 RESERVED > 5: 00000000f8000000 - 00000000f9000000 =3D 2 RESERVED > enter handle_19: > NULL > Booting from ROM... > Booting from c000:0358 > iPXE (PCI 00:00.0) starting execution...ok > iPXE initialising devices...ok >=20 >=20 >=20 > iPXE 1.0.0+ (b757) -- Open Source Network Boot Firmware -- = http://ipxe.org > Features: HTTP iSCSI DNS TFTP AoE bzImage ELF MBOOT PXE PXEXT Menu >=20 > net0: 00:0d:b9:33:11:c4 using rtl8168 on PCI01:00.0 (open) > [Link:down, TX:0 TXE:0 RX:0 RXE:0] > [Link status: Down (http://ipxe.org/38086101)] > Waiting for link-up on net0... failed: Down (http://ipxe.org/38086101) > net1: 00:0d:b9:33:11:c5 using rtl8168 on PCI02:00.0 (open) > [Link:up, TX:0 TXE:0 RX:0 RXE:0] > DHCP (net1 00:0d:b9:33:11:c5)........... ok > net1: 192.168.43.213/255.255.255.0 gw 192.168.43.1 > Nothing to boot: No such file or directory (http://ipxe.org/2d03e13b) > net2: 00:0d:b9:33:11:c6 using rtl8168 on PCI03:00.0 (open) > [Link:up, TX:0 TXE:0 RX:0 RXE:0] > DHCP (net2 00:0d:b9:33:11:c6)...... ok > net1: 192.168.43.213/255.255.255.0 gw 192.168.43.1 (inaccessible) > net2: 10.255.255.75/255.255.255.0 gw 10.255.255.1 > Next server: 10.255.255.1 > Filename: pxe10/boot/pxeboot > Root path: /home/pxe10 > tftp://10.255.255.1/pxe10/boot/pxeboot... ok > PXE Loader 1.00 >=20 > Building the boot loader arguments > Relocating the loader and the BTX > Starting the BTX loader > /boot/kernel/kernel text=3D0xf09688 data=3D0xd02e8+0xe61e8 = syms=3D[0x4+0xd2850+0x4+0x15704b] > | > ______ ____ _____ _____ > | ____| | _ \ / ____| __ \ > | |___ _ __ ___ ___ | |_) | (___ | | | | > | ___| '__/ _ \/ _ \| _ < \___ \| | | | > | | | | | __/ __/| |_) |____) | |__| | > | | | | | | || | | | > |_| |_| \___|\___||____/|_____/|_____/ ``` = ` > s` `.....---.......--.``` = -/ > +------------Welcome to FreeBSD-----------+ +o .--` /y:` = +. > | | yo`:. :o = `+- > | 1. Boot Multi User [Enter] | y/ -/` = -o/ > | 2. Boot [S]ingle User | .- = ::/sy+:. > | 3. [Esc]ape to loader prompt | / `-- = / > | 4. Reboot | `: = :` > | | `: = :` > | Options: | / = / > | 5. Configure Boot [O]ptions... | .- = -. > | | -- = -. > | | `:` = `:` > | | .-- `--. > | | .---.....----. > +-----------------------------------------+ >=20 >=20 > Booting... > Copyright (c) 1992-2014 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.0-STABLE #3 r267161: Fri Jun 6 13:55:58 EDT 2014 > = mdtancsa@ich10.sentex.ca:/home/pxe10/usr/obj/home/pxe10/usr/src/sys/GENERI= C i386 > FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) = 20140512 > CPU: AMD G-T40E Processor (1000.02-MHz 686-class CPU) > Origin =3D "AuthenticAMD" Id =3D 0x500f20 Family =3D 0x14 Model =3D = 0x2 Stepping =3D 0 > = Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=3D0x802209<SSE3,MON,SSSE3,CX16,POPCNT> > AMD Features=3D0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> > AMD = Features2=3D0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKI= NIT,WDT> > TSC: P-state invariant, performance statistics > real memory =3D 2114293760 (2016 MB) > avail memory =3D 2052497408 (1957 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <CORE COREBOOT> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > random device not loaded; using insecure entropy > ioapic0 <Version 2.1> irqs 0-23 on motherboard > kbd0 at kbdmux0 > random: <Software, Yarrow> initialized > module_register_init: MOD_LOAD (vesa, 0xc0f67220, 0) error 19 > acpi0: <CORE COREBOOT> on motherboard > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on = acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 550 > Event timer "HPET1" frequency 14318180 Hz quality 450 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port = 0x1000-0x10ff mem 0xfe500000-0xfe500fff,0xfe400000-0xfe403fff at device = 0.0 on pci1 > re0: Using 1 MSI-X message > re0: ASPM disabled > re0: Chip rev. 0x2c000000 > re0: MAC rev. 0x00200000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on = miibus0 > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, = 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, = 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, = 1000baseT-FDX-flow-master, auto, auto-flow > re0: Ethernet address: 00:0d:b9:33:11:c4 > pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port = 0x2000-0x20ff mem 0xfe700000-0xfe700fff,0xfe600000-0xfe603fff at device = 0.0 on pci2 > re1: Using 1 MSI-X message > re1: ASPM disabled > re1: Chip rev. 0x2c000000 > re1: MAC rev. 0x00200000 > miibus1: <MII bus> on re1 > rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on = miibus1 > rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, = 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, = 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, = 1000baseT-FDX-flow-master, auto, auto-flow > re1: Ethernet address: 00:0d:b9:33:11:c5 > pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port = 0x3000-0x30ff mem 0xfe900000-0xfe900fff,0xfe800000-0xfe803fff at device = 0.0 on pci3 > re2: Using 1 MSI-X message > re2: ASPM disabled > re2: Chip rev. 0x2c000000 > re2: MAC rev. 0x00200000 > miibus2: <MII bus> on re2 > rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on = miibus2 > rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, = 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, = 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, = 1000baseT-FDX-flow-master, auto, auto-flow > re2: Ethernet address: 00:0d:b9:33:11:c6 > pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > ath0: <Atheros 9280> mem 0xfea00000-0xfea0ffff at device 0.0 on pci4 > ath0: [HT] enabling HT modes > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 2 RX streams; 2 TX streams > ath0: AR9280 mac 128.2 RF5133 phy 13.0 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port = 0x4020-0x4027,0x4040-0x4043,0x4028-0x402f,0x4044-0x4047,0x4000-0x400f = mem 0xfeb04000-0xfeb043ff at device 17.0 on pci0 > ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich3: <AHCI channel> at channel 3 on ahci0 > ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem = 0xfeb00000-0xfeb00fff at device 18.0 on pci0 > usbus0 on ohci0 > ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem = 0xfeb04400-0xfeb044ff at device 18.2 on pci0 > usbus1: EHCI version 1.0 > usbus1 on ehci0 > ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem = 0xfeb01000-0xfeb01fff at device 19.0 on pci0 >=20 > .... >=20 > ---Mike >=20 >=20 > --=20 > ------------------- > Mike Tancsa, tel +1 519 651 3400 > Sentex Communications, mike@sentex.net > Providing Internet services since 1994 www.sentex.net > Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5FA602AC-C827-4727-A038-B96FBEF8E6AB>