Date: Fri, 24 May 2002 13:54:16 +0200 From: "Karl M. Joch" <k.joch@kmjeuro.com> To: stable@freebsd.org Subject: slip over X21 with RAD adaters only works up to speed 19200 Message-ID: <3CEE29E8.5020900@kmjeuro.com>
next in thread | raw e-mail | index | archive | help
hi, i have x21/64kb line with rad mit 24t/21c adapters on both ends. after lot of trying i found out that if i set -s in slattach > then 19200 i dont get a connection established. running on 960 or 19200 everything works just fine (routing, arp proxy). is there any special setting for slattach or stty to use a combination like this. the adapter supports up to 200kb and both ends freebsd 4.5 systems. telecom says their line make 64kb, so its my turn to show them its not. but i am not really good with serial lines. i run slattach with -h -l -s 19200 /dev/cuaa0. this sets ctsrts and clocal on. many thanks. -------- Original Message -------- Subject: STTY ooe slip disc; speed 19200 baud; 0 rows; 0 columns; lflags: -icanon -isig -iexten -echo -echoe -echok -echoke -echonl -echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff -ixany -imaxbel -ignbrk -brkint -inpck -ignpar -parmrk oflags: -opost -onlcr -ocrnl -oxtabs -onocr -onlret cflags: cread cs8 -parenb -parodd -hupcl clocal -cstopb crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^@; dsusp = ^@; eof = ^@; eol = ^@; eol2 = ^@; erase = ^@; erase2 = ^@; intr = ^@; kill = ^@; lnext = ^@; min = 0; quit = ^@; reprint = ^@; start = ^@; status = ^@; stop = ^@; susp = ^@; time = 0; werase = ^@; -- Best regards / Mit freundlichen Gruessen, Karl M. Joch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CEE29E8.5020900>