Date: Fri, 17 Oct 2014 11:41:41 +0200 From: Hans Petter Selasky <hps@selasky.org> To: gabor@zahemszky.hu Cc: freebsd-usb@freebsd.org Subject: Re: u3g and Vodafone k3772 (not k3772z) Message-ID: <5440E455.8030003@selasky.org> In-Reply-To: <9bb5ca363a4e17e9f41b50b748316cdf@zahemszky.hu> References: <c5c1344ad4a64cd91e769a0e0fd750aa@zahemszky.hu> <543F662E.2010801@bitfrost.no> <b02117a6904277a0a674ef618f8b98b0@zahemszky.hu> <543F757F.3080008@selasky.org> <32bbfea82744ca84ffa31c27917f3013@zahemszky.hu> <543F7F5F.5070102@selasky.org> <09454923d8518e4f1e2e7aab64e499ba@zahemszky.hu> <543F88B6.904@selasky.org> <9bb5ca363a4e17e9f41b50b748316cdf@zahemszky.hu>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/17/14 11:26, gabor@zahemszky.hu wrote: > 2014-10-16 10:58 időpontban Hans Petter Selasky ezt írta: >> Hi, >> >> You need to run 11-curent, the quirk is not in 10-branch yet. >> >> The following patch for 11-current should fix your device. >> >> Hint: You can boot a 11-current kernel with 10-xxx userland! >> >> Can you test the attached patch on 11-current, and report back? > > OK. I've upgraded to 11-CURRENT, patched in the ID-s. > Kldloaded the u3g module (and cannot load the usb_quirk module) > Here is the demsg output after plugging in the stick: > > ugen0.2: <Vodafone Huawei> at usbus0 > cdce0: <Vodafone Huawei Vodafone Mobile Broadband Huawei, class 0/0, rev > 1.10/1.01, addr 2> on usbus0 > cdce0: faking MAC address > umass0: <Vodafone Huawei Vodafone Mobile Broadband Huawei, class 0/0, > rev 1.10/1.01, addr 2> on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > ue0: <USB Ethernet> on cdce0 > ue0: Ethernet address: 2a:35:81:05:00:00 > umass0:2:0: Attached to scbus2 > cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0 > cd1: <Vodafone CD ROM (Huawei) 2.31> Removable CD-ROM SCSI-2 device > cd1: 1.000MB/s transfers > cd1: cd present [65536 x 2048 byte records] > cd1: quirks=0x10<10YTE_ONLY> > > Thanks, > > Gabor < Gabor at Zahemszky dot HU > > > Hi, Can you show the output from "usbconfig -d X.Y dump_device_desc"? We need to add the non-autoinstall disk ID to u3g aswell. Thank you! --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5440E455.8030003>