Date: Fri, 20 Apr 2007 13:58:25 -0400 From: Sven Willenberger <sven@dmv.com> To: Jack Vogel <jfvogel@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: CARP and em0 timeout watchdog Message-ID: <1177091905.5457.17.camel@lanshark.dmv.com> In-Reply-To: <2a41acea0704201017n42d4e987l77752ee8f7ca9f1f@mail.gmail.com> References: <1176911436.7416.8.camel@lanshark.dmv.com> <1177084316.5457.5.camel@lanshark.dmv.com> <20070420160431.GA17356@icarus.home.lan> <2a41acea0704201017n42d4e987l77752ee8f7ca9f1f@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 2007-04-20 at 10:17 -0700, Jack Vogel wrote:
> On 4/20/07, Jeremy Chadwick <koitsu@freebsd.org> wrote:
> > On Fri, Apr 20, 2007 at 11:51:56AM -0400, Sven Willenberger wrote:
> > > Having done more diagnostics I have found out it is not CARP related at
> > > all. It turns out that the same timeouts will happen when ftp'ing to the
> > > physical address IPs as well. There is also an odd situation here
> > > depending on which protocol I use. The two boxes are connected to a Dell
> > > Powerconnect 2616 gig switch with CAT6. If I scp files from the
> > > 192.168.0.18 to the 192.168.0.19 box I can transfer gigs worth without a
> > > hiccup (I used dd to create various sized testfiles from 32M to 1G in
> > > size and just scp testfile* to the other box). On the other hand, if I
> > > connect to 192.168.0.19 using ftp (either active or passive) where ftp
> > > is being run through inetd, the interface resets (watchdog) within
> > > seconds (a few MBs) of traffic. Enabling polling does nothing, nor does
> > > changing net.inet.tcp.{recv,send}space. Any ideas why I would be seeing
> > > such behavioral differences between scp and ftp?
> >
> > You'll get a much higher throughput rate with FTP than you will with
> > SSH, simply because encryption overhead is quite high (even with the
> > Blowfish cipher). With a very fast processor and on a gigE network
> > you'll probably see 8-9MByte/sec via SSH while 60-70MByte/sec via FTP.
> > That's the only difference I can think of.
> >
> > The watchdog resets I can't explain; Jack Vogel should be able to assist
> > with that. But it sounds like the resets only happen under very high
> > throughput conditions (which is why you'd see it with FTP but not SSH).
>
> What kind of hardware is this interface? Watchdogs mean TX cleanup
> isn't happening in a reasonable time, without further data its hard to
> know what might be going on.
>
> Jack
from pciconf:
em0@pci13:0:0: class=0x020000 card=0x108c15d9 chip=0x108c8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/1000 PM'
class = network
subclass = ethernet
em1@pci14:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
em0 is the interface in question.
from dmesg:
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x4000-0x401f mem 0xe0300000-0xe031ffff irq 16 at device 0.0 on pci13
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x5000-0x501f mem 0xe0400000-0xe041ffff irq 17 at device 0.0 on pci14
Sven
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1177091905.5457.17.camel>