Date: Wed, 06 Dec 2000 22:18:16 -0800 From: "Alec Wolman" <wolman@cs.washington.edu> To: freebsd-stable@freebsd.org Subject: ata boot problem with 4.2-STABLE Message-ID: <200012070618.WAA10501@miles.cs.washington.edu>
next in thread | raw e-mail | index | archive | help
I have an ASUS A7V (Rev 1004c) system, and I get a 30 second pause during the boot process. This pause occurs regardless of how IDE_DELAY is set in the kernel configuration file. Here is an excerpt from the boot verbose output - the pause occurs where I have inserted the three ^ symbols. I also get another shorter pause at the point where the "timeout waiting for intr" messages appear. Can some ata expert explain what is going wrong here? Thanks, Alec atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800 ata0: mask=03 status0=a0 status1=b0 ata0: mask=03 ostat0=a0 ostat2=b0 ^^^ ata0: mask=00 status0=a0 status1=b0 ata0: probe allocation failed ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808 ata1: mask=03 status0=50 status1=50 ata1: mask=03 ostat0=50 ostat2=50 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=14 b=eb ata1: mask=03 status0=00 status1=00 ata1: devices=0c ata1: at 0x170 irq 15 on atapci0 [ irrelevant output elided ] atapci1: <Promise ATA100 controller> port 0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem 0xd5000000-0xd501ffff irq 10 at device 17.0 on pci0 ata-: ata2 exists, using next available unit number ata2: iobase=0x9400 altiobase=0x9002 bmaddr=0x8000 ata2: mask=03 status0=50 status1=50 ata2: mask=03 ostat0=50 ostat2=50 ata2-master: ATAPI probe a=00 b=00 ata2-slave: ATAPI probe a=00 b=00 ata2: mask=03 status0=50 status1=50 ata2-master: ATA probe a=01 b=a5 ata2-slave: ATA probe a=01 b=a5 ata2: devices=03 ata2: at 0x9400 on atapci1 ata3: iobase=0x8800 altiobase=0x8402 bmaddr=0x8008 ata3: mask=03 status0=20 status1=20 ata3: mask=03 ostat0=20 ostat2=20 ata3-master: ATAPI probe a=20 b=20 ata3-slave: ATAPI probe a=20 b=20 ata3: mask=03 status0=20 status1=20 ata3-master: ATA probe a=a5 b=a5 ata3-slave: ATA probe a=a5 b=a5 ata3: devices=03 ata3: at 0x8800 on atapci1 using shared irq10. [ more irrelevant output elided ] ata3-slave: ata_command: timeout waiting for intr ata3-slave: identify failed ata3-master: ata_command: timeout waiting for intr ata3-master: identify failed ata2-master: success setting UDMA5 on Promise chip Creating DISK ad0 Creating DISK wd0 ad0: <IBM-DTLA-307045/TX6OA50C> ATA-5 disk at ata2-master ad0: 43979MB (90069840 sectors), 89355 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 Promise check1 failed ad0: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ata2-slave: success setting UDMA5 on Promise chip Creating DISK ad1 Creating DISK wd1 ad1: <IBM-DTLA-307045/TX6OA50C> ATA-5 disk at ata2-slave ad1: 43979MB (90069840 sectors), 89355 cyls, 16 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 Promise check1 failed ad1: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-slave UDMA100 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting UDMA2 on VIA chip acd0: <TOSHIBA DVD-ROM SD-M1402/1010> DVD-ROM drive at ata1 as master acd0: read 6890KB/s (6890KB/s), 128KB buffer, UDMA33 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ata1-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-slave: success setting WDMA2 on VIA chip acd1: <PLEXTOR CD-R PX-W1210A/1.02> CD-RW drive at ata1 as slave acd1: read 5512KB/s (5512KB/s) write 2067KB/s (2067KB/s), 2048KB buffer, WDMA2 acd1: Reads: CD-R, CD-RW, CD-DA stream, packet acd1: Writes: CD-R, CD-RW, test write acd1: Audio: play, 256 volume levels acd1: Mechanism: ejectable tray acd1: Medium: CD-ROM unknown medium, unlocked Mounting root from ufs:/dev/ad1s1a ad1s1: type 0xa5, start 63, end = 90060389, size 90060327 : OK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200012070618.WAA10501>