Date: Fri, 29 Jan 2010 13:41:51 +0200 From: Alexander Motin <mav@FreeBSD.org> To: Yamagi Burmeister <lists@yamagi.org> Cc: freebsd-current@freebsd.org Subject: Re: Pack of CAM improvements Message-ID: <4B62C97F.7080000@FreeBSD.org> In-Reply-To: <alpine.OSX.2.00.1001281922010.4896@idate.home.yamagi.org> References: <4B55D9D4.1000008@FreeBSD.org> <alpine.OSX.2.00.1001232228180.2800@idate.home.yamagi.org> <alpine.BSF.2.00.1001281701530.29385@screw.home.yamagi.org> <4B61C688.2050609@FreeBSD.org> <alpine.BSF.2.00.1001281835110.30867@screw.home.yamagi.org> <4B61CCB6.4040005@FreeBSD.org> <alpine.OSX.2.00.1001281922010.4896@idate.home.yamagi.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Yamagi Burmeister wrote:
> On Thu, 28 Jan 2010, Alexander Motin wrote:
>
>>>> Yamagi Burmeister wrote:
>>>>> ahcich0: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr
>>>>> 00000000
>>>>> ahcich0: Timeout on slot 0
>>>>
>>>> Try to disable MSI interrupts with `hint.ahci.0.msi=0`.
>>>
>>> That fixed the problem. Thank you :)
>>
>> That's quite strange, as in many other cases IXP700 is working fine.
>> Different revisions? What is your `pciconf -lvbc` reports?
>
> When I helped nox@ debugging a problem with timeouts we noticed, that
> our controlers are of differend revisions. The pciconf output ist:
>
> ahci0@pci0:0:17:0: class=0x010601 card=0x43911002 chip=0x43911002
> rev=0x00 hdr=0x00
> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
> device = 'SB700 SATA Controller [AHCI mode]'
> class = mass storage
> subclass = SATA
> bar [10] = type I/O Port, range 32, base 0xd000, size 8, enabled
> bar [14] = type I/O Port, range 32, base 0xc000, size 4, enabled
> bar [18] = type I/O Port, range 32, base 0xb000, size 8, enabled
> bar [1c] = type I/O Port, range 32, base 0xa000, size 4, enabled
> bar [20] = type I/O Port, range 32, base 0x9000, size 16, enabled
> bar [24] = type Memory, range 32, base 0xfe8ff800, size 1024,
> enabled
> cap 01[60] = powerspec 2 supports D0 D3 current D0
> cap 05[50] = MSI supports 4 messages, 64 bit
> cap 12[70] = SATA Index-Data Pair
What's interesting, is that Asus board with the same chipset doesn't
expose MSI support at all:
ahci0@pci0:0:17:0: class=0x010601 card=0x43911002 chip=0x43911002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 SATA Controller [AHCI mode]'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0xc000, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xb000, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xa000, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x9000, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x8000, size 16, enabled
bar [24] = type Memory, range 32, base 0xfbcffc00, size 1024, enabled
cap 01[60] = powerspec 2 supports D0 D3 current D0
cap 12[70] = SATA Index-Data Pair
--
Alexander Motin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B62C97F.7080000>