Date: Tue, 27 Jan 2004 17:34:55 -0700 From: Colin Harford <charford-list@infinithost.com> To: Panagiotis Astithas <past@noc.ntua.gr> Cc: Lefteris Chatzibarbas <lefcha@hellug.gr> Subject: Re: System still hangs with "ata1-master: TIMEOUT - SETFEATURES SET TRANSFER MODE" Message-ID: <CB33DD7D-5129-11D8-B730-000A9597E964@infinithost.com> In-Reply-To: <401672F7.8080404@noc.ntua.gr> References: <20040125111743.GA564@bsd> <401672F7.8080404@noc.ntua.gr>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I had the exact same problem with an Intel D850MD motherboard... I actually applied the most recent bios patch for it, and then there was no more problems... Not sure if this will fix it for you, but it did work for me... FWIW: Jan13/14th am -current will also work... CH On 27-Jan-04, at 7:17 AM, Panagiotis Astithas wrote: > Lefteris Chatzibarbas wrote: >> Hello, >> Devices are: >> ad0: <WDC WD800JB-00ETA0/77.07W77> ATA-6 disk at ata0-master >> acd0: <DV-516E/3.04> DVDROM drive at ata1 as master >> acd1: <CD-W524E/1.0A> CDRW drive at ata1 as slave >> Verbose boot of a good kernel: >> http://members.hellug.gr/lefcha/dmesg.out >> System still hangs during boot with the message: >> ata1-master: TIMEOUT - SETFEATURES SET TRANSFER MODE retrying (0 >> retries left) >> ... and verbose boot: >> ata1: reiniting channel .. >> ata1: reset tp1 mask=03 ostat0=50 ostat1=50 >> ata1-master: stat=0x10 err=0x01 lib=0x14 msb=0xeb >> ata1-slave: stat=0x10 err=0x01 lib=0x14 msb=0xeb >> ata1: reset tp2 mask=03 stat0=10 stat1=00 >> devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> >> ata1: resetting done .. >> ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin >> ata1: reiniting channel .. >> ata1: reset tp1 mask=03 ostat0=50 ostat1=50 >> ata1-master: stat=0x10 err=0x01 lib=0x14 msb=0xeb >> ata1-slave: stat=0x10 err=0x01 lib=0x14 msb=0xeb >> ata1: reset tp2 mask=03 stat0=10 stat1=00 >> devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> >> ata1: resetting done .. >> ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin >> Soren Schmidt's commit 2004/01/19 07:20:00 PST: >> 1.202 +2 -1 src/sys/dev/ata/ata-all.c >> 1.71 +1 -1 src/sys/dev/ata/ata-all.h >> 1.17 +23 -21 src/sys/dev/ata/ata-queue.c >> 1.161 +1 -1 src/sys/dev/ata/atapi-cd.c >> ... or: >> http://lists.freebsd.org/pipermail/cvs-src/2004-January/016880.html >> ... didn't correct the problem. >> Thanks > > "Me too". > Same controller, same hard disk, only one device on the second channel: > acd0: DVDROM <DVD-ROM DDU1621> at ata1-master UDMA33 > I used 5.2-RELEASE and the -current snapshot form 24/1. The former > freezes after the "TIMEOUT" message, the latter just locks up solid. > The machine runs happily a -current from last October though. > > Cheers, > -- > Panagiotis Astithas > Electrical & Computer Engineer, PhD > Network Management Center > National Technical University of Athens, Greece > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to > "freebsd-current-unsubscribe@freebsd.org" > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (Darwin) iD8DBQFAFwOy70HXebAAFAERAj0uAKDnBAwLmc/FD9NRN2/eDSElnP9RTwCdGV4v a91nis1DGC7VLrPt7kjcTis= =Pyys -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CB33DD7D-5129-11D8-B730-000A9597E964>