Date: Sun, 14 Oct 2007 16:51:07 +0200 From: Michal Varga <varga.michal@gmail.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-current@freebsd.org Subject: Re: GigaByte GA-MA69VM USB+mouse problem [WAS: AMD690G/V issues with 7-current (sata, usb)] Message-ID: <1192373467.1059.7.camel@xenon.stonehenge.sk> In-Reply-To: <200710141258.14052.hselasky@c2i.net> References: <1192302906.1028.31.camel@xenon.stonehenge.sk> <200710141258.14052.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 2007-10-14 at 12:58 +0200, Hans Petter Selasky wrote: > Michal Varga: > > If you run "usbdevs -v" does it show your mouse ? > > --HPS Right after boot, not: dmesg: uhub0: device problem (TIMEOUT), disabling port 2 usbdevs -v: Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb5: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered port 7 powered port 8 powered port 9 powered port 10 powered After that, when I replug it to another port, everything works fine: dmesg: ums0: <A4Tech USB Optical Mouse, class 0/0, rev 1.10/0.01, addr 2> on uhub1 ums0: 7 buttons and Z dir. usbdevs -v: Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, USB Optical Mouse(0x0006), A4Tech(0x09da), rev 0.01 Controller /dev/usb2: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb5: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), ATI(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered port 7 powered port 8 powered port 9 powered port 10 powered m.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1192373467.1059.7.camel>