Date: Fri, 6 Aug 2004 19:50:23 GMT From: John Baldwin <jhb@FreeBSD.org> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/68351: bge0 watchdog timeout on 5.2.1 and -current, 5.1 is ok Message-ID: <200408061950.i76JoNSb045345@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/68351; it has been noted by GNATS. From: John Baldwin <jhb@FreeBSD.org> To: Vadim Mikhailov <freebsd-bugs@mikhailov.org> Cc: freebsd-gnats-submit@FreeBSD.org Subject: Re: kern/68351: bge0 watchdog timeout on 5.2.1 and -current, 5.1 is ok Date: Fri, 6 Aug 2004 15:44:46 -0400 On Friday 06 August 2004 03:10 pm, Vadim Mikhailov wrote: > John Baldwin wrote: > > On Friday 06 August 2004 02:02 pm, Vadim Mikhailov wrote: > >>John Baldwin wrote: > >> > Have you tried disabling ACPI to see if it works better? > >> > >> Can not try it now - this is production server under load, > >>and it is working fine since I installed Intel Pro/1000 XT card to > >> overcome bge problems. > >> But, as stated in my original report, I did try it disabling ACPI > >> about month ago with current - didn't make any difference. > >> > >> > Also, can you provide mptable output? > >> > >> Here it is: > > > > Thanks, can you also provide a full dmesg output? The two bge's are > > routed to pins 0 and 1 of the second I/O APIC which should be IRQs 16 and > > 17 if the first I/O APIC has 16 interrupt pins (dmesg will tell me that). > > This is /var/run/dmesg.boot from verbose boot. Oddly enough, it does not > start with standard FreeBSD copyrights, probably because of dmesg buffer > overflow, however I didn't think this limit applies to /var/run/dmesg.boot > file. Hopefully it still has enough information about APIC and interrupts. Thanks. It looks like the interrupts are routed just as both ACPI and the MP Table say they should be. Have you tried using cvs to change the sys/dev/bge source back to 5.1 sources with the rest of the kernel being 5.2.1 to see if it works ok? -- John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200408061950.i76JoNSb045345>