Date: Mon, 17 Nov 1997 20:21:28 -0500 From: Randall Hopper <rhh@ct.picker.com> To: Volker Paepcke <scratchy@vulcan.franken.de>, Joachim Wunder <Joachim.Wunder@lrz.tu-muenchen.de> Cc: multimedia@FreeBSD.ORG Subject: Re: [Fxtv 0.45]: can only select one channel (from vcr) Message-ID: <19971117202128.50716@ct.picker.com> In-Reply-To: <199711151224.NAA00763@yavin.franken.de>; from Volker Paepcke on Sat, Nov 15, 1997 at 01:24:59PM %2B0100 References: <199711151224.NAA00763@yavin.franken.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Volker Paepcke:
|I have a Hauppauge model 816 WinTV-card (PAL-BG) and its working great.
|But I can only select exactly one frequency: 544.75 Mhz. This is the
...
|bktr0: <BrookTree 848> rev 0x12 int a irq 12 on pci0.10.0
|Hauppauge WinCast/TV, Temic PAL tuner.
Joachim Wunder:
|Huh, mine is the 805 Win/TCpci card. I am living in Germany, too, and I am
|
|bktr0 <BrookTree 848> rev 18 int a irq 11 on pci0:13
|Hauppauge WinCast/TV, Temic PAL tuner, msp3400c stereo.
...
I'd help if I could, but to me this sounds like the video connections
aren't quite right or the tuner(s) isn't/aren't yet fully supported.
You may have done this already, but in case not:
- Verify that tuner is selected in the Input menu
- Turn AFC on in the Options menu
- Put your cursor over the video window
- Key in frequencies using "f<frequency>" (e.g. "f500.0")
Sounds like you have your VCR's tuner output plugged into the WinTV's
tuner? If so, plug it into a TV instead and verify you can get all the
channels? Could it be you don't have your VCR on tuner-pass though?
This probably isn't it, but it came to mind.
As a temporary fix, use your VCR's tuner and plug its video/audio out into
the video/audio in jacks of the WinTV.
Randall
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19971117202128.50716>