Date: Wed, 3 Sep 2003 22:20:19 -0700 (PDT) From: Anish Mistry <amistry@am-productions.biz> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/56394:ACPI sleep delay causes system reboot on second suspend Message-ID: <200309040520.h845KJTH094843@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/56394; it has been noted by GNATS. From: Anish Mistry <amistry@am-productions.biz> To: freebsd-gnats-submit@FreeBSD.org Cc: Subject: Re: kern/56394:ACPI sleep delay causes system reboot on second suspend Date: Thu, 4 Sep 2003 01:19:05 -0400 http://am-productions.biz/debug/acpidump.txt http://am-productions.biz/debug/littleguy.dsdt http://am-productions.biz/debug/littleguy.asl http://am-productions.biz/debug/dmesg.txt Forgot to include dmesg: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #13: Tue Sep 2 00:13:41 EDT 2003 root@littleguy.am-productions.biz:/usr/obj/usr/src/sys/LITTLEGUY Preloaded elf kernel "/boot/kernel/kernel" at 0xc0416000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0416250. Calibrating clock(s) ... i8254 clock: 1193167 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 842151665 Hz CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (842.15-MHz 586-class CPU) Origin = "GenuineTMx86" Id = 0x543 Processor revision 1.4.1.0 Code Morphing Software revision 4.3.0-9-197 20020207 23:55 official release 4.3.0#7 LongRun mode: 2 <867MHz 1300mV 100%> real memory = 251527168 (239 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x000000000043d000 - 0x000000000eb81fff, 242503680 bytes (59205 pages) avail memory = 239779840 (228 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6f90 bios32: Entry = 0xfd770 (c00fd770) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd770+0x11e pnpbios: Found PnP BIOS data at 0xc00f6fe0 pnpbios: Entry = f0000:9528 Rev = 1.0 Other BIOS signatures found: mem: <memory & I/O> null: <null device, zero device> random: <entropy source> npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <FUJ PAULING2> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80003074 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03951279) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x59 3 4 5 7 10 11 embedded 0 4 A 0x08 3 4 5 7 9 10 14 15 embedded 0 12 A 0x01 3 4 5 7 9 10 14 15 embedded 0 16 A 0x02 3 4 5 7 9 10 14 15 embedded 0 18 A 0x05 3 4 5 7 9 10 14 15 embedded 0 18 B 0x06 3 4 5 7 9 10 14 15 embedded 0 19 A 0x03 3 4 5 7 9 10 14 15 embedded 0 20 A 0x04 3 4 5 7 9 10 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 6 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 6 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 18 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 12 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 2, max = 941, width = 939 ACPI timer looks BAD min = 2, max = 16, width = 14 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0 acpi_cpu0: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.EIO_.LNKU irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.EIO_.LNKH irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.4.0 \\_SB_.PCI0.EIO_.LNKA irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.12.0 \\_SB_.PCI0.EIO_.LNKC irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.19.0 \\_SB_.PCI0.EIO_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.20.0 \\_SB_.PCI0.EIO_.LNKB irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.16.0 \\_SB_.PCI0.EIO_.LNKE irq 0: [ 3 4 5 7 9 10 11] low,level,sharable 0.18.0 \\_SB_.PCI0.EIO_.LNKF irq 0: [ 3 4 5 7 9 10 11] low,level,sharable 0.18.1 ---- before setting priority for links ------------ \\_SB_.PCI0.EIO_.LNKE: interrupts: 3 4 5 7 9 10 11 penalty: 1220 1220 220 1220 720 220 320 references: 1 priority: 0 \\_SB_.PCI0.EIO_.LNKF: interrupts: 3 4 5 7 9 10 11 penalty: 1220 1220 220 1220 720 220 320 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.EIO_.LNKE: interrupts: 3 4 5 7 9 10 11 penalty: 1220 1220 220 1220 720 220 320 references: 1 priority: 734 \\_SB_.PCI0.EIO_.LNKF: interrupts: 3 4 5 7 9 10 11 penalty: 1220 1220 220 1220 720 220 320 references: 1 priority: 734 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.EIO_.LNKU irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.EIO_.LNKH irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.4.0 \\_SB_.PCI0.EIO_.LNKA irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.12.0 \\_SB_.PCI0.EIO_.LNKC irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.19.0 \\_SB_.PCI0.EIO_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.20.0 \\_SB_.PCI0.EIO_.LNKB irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.16.0 \\_SB_.PCI0.EIO_.LNKE irq 10: [ 3 4 5 7 9 10 11] low,level,sharable 0.18.0 \\_SB_.PCI0.EIO_.LNKF irq 5: [ 3 4 5 7 9 10 11] low,level,sharable 0.18.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 1, range 32, base fc000000, size 20, enabled found-> vendor=0x1279, dev=0x0395, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1279, dev=0x0396, revid=0x00 bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1279, dev=0x0397, revid=0x00 bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base fc100000, size 12, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.EIO_.LNKU) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001000, size 8, port disabled map[14]: type 1, range 32, base fc101000, size 12, memory disabled pcib0: matched entry for 0.4.INTA (source \\_SB_.PCI0.EIO_.LNKH) pcib0: slot 4 INTA is routed to irq 9 found-> vendor=0x10b9, dev=0x5451, revid=0x01 bus=0, slot=4, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=6, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.EIO_.LNKA) pcib0: slot 12 INTA is routed to irq 9 found-> vendor=0x104c, dev=0xac50, revid=0x01 bus=0, slot=12, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00001400, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc3 bus=0, slot=15, func=0 class=01-01-fa, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00008000, size 8, enabled map[14]: type 1, range 32, base fc102000, size 8, enabled pcib0: matched entry for 0.16.INTA (source \\_SB_.PCI0.EIO_.LNKB) pcib0: slot 16 INTA is routed to irq 9 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=16, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc102800, size 11, memory disabled map[14]: type 1, range 32, base fc104000, size 14, enabled pcib0: matched entry for 0.19.INTA (source \\_SB_.PCI0.EIO_.LNKC) pcib0: slot 19 INTA is routed to irq 9 found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=0, slot=19, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0010, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled map[14]: type 4, range 32, base 00001800, size 8, enabled map[18]: type 1, range 32, base fc103000, size 12, enabled pcib0: matched entry for 0.20.INTA (source \\_SB_.PCI0.EIO_.LNKD) pcib0: slot 20 INTA is routed to irq 9 found-> vendor=0x1002, dev=0x4c52, revid=0x64 bus=0, slot=20, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <serial bus, USB> at device 2.0 (no driver attached) pci0: <multimedia, audio> at device 4.0 (no driver attached) pci0: <bridge, PCI-unknown> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <bridge, PCI-CardBus> at device 12.0 (no driver attached) atapci0: <AcerLabs Aladdin UDMA66 controller> port 0x1400-0x140f at device 15.0 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: reset tp3 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0xd0 err=0x00 lsb=0x12 msb=0x00 ata1-slave: stat=0xd0 err=0x04 lsb=0xff msb=0xff ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: reset tp3 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 rl0: <RealTek 8139 10/100BaseTX, rev. C> port 0x8000-0x80ff mem 0xfc102000-0xfc1020ff irq 9 at device 16.0 on pci0 rl0: Ethernet address: 00:e0:00:ae:45:08 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached pci0: <serial bus, FireWire> at device 19.0 (no driver attached) pci0: <display, VGA> at device 20.0 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_ec0: <embedded controller: GPE 0> port 0x66,0x62 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 7e 4f 4f 82 55 03 b4 1f 00 4f 0d 0e 00 00 07 80 92 88 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 7e 4f 4f 82 55 03 b4 1f 00 4f 0d 0e 00 00 07 80 92 88 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 842151665 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA66 on AcerLabs Aladdin chip GEOM: create disk ad0 dp=0xc24bae70 ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 GEOM: new disk ad0 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin acd0: setting UDMA33 on AcerLabs Aladdin chip acd0: <TOSHIBA DVD-ROM SD-R2212/1F15> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/2/63 s:63 l:10490382 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/9/63 s:10490445 l:20964825 [2] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/0/63 s:31455270 l:7598745 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 5371075584 end 5371107839 GEOM: Configure ad0s2, start 5371107840 length 10733990400 end 16105098239 GEOM: Configure ad0s3, start 16105098240 length 3890557440 end 19995655679 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 481656832 end 750092287 GEOM: Configure ad0s2c, start 0 length 10733990400 end 10733990399 GEOM: Configure ad0s2d, start 750092288 length 268435456 end 1018527743 GEOM: Configure ad0s2e, start 1018527744 length 268435456 end 1286963199 GEOM: Configure ad0s2f, start 1286963200 length 9447027200 end 10733990399 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init Linux ELF exec handler installed acpi_cmbat1: battery initialization failed, giving up -- Anish Mistry amistry@am-productions.biz AM Productions http://am-productions.biz/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309040520.h845KJTH094843>