Date: Fri, 19 Jul 2019 23:40:29 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 239245] r350074 will panic on ppc64 PowerMac G5 in vm_phys_enqueue_contig Message-ID: <bug-239245-227-KdMEMg5eay@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-239245-227@https.bugs.freebsd.org/bugzilla/> References: <bug-239245-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D239245 --- Comment #43 from Dennis Clarke <dclarke@blastwave.org> --- (In reply to Francis Little from comment #37) I think that the three of us have four machines on hand. I have two of these 64-bit PowerMac G5 types wherein I rarely powerup the smaller of the pair. However this feels like a good opportunity to employ it.=20 Here is a bit of data from the PowerMac G5 "quad" :=20 hydra#=20 hydra# uname -apKU FreeBSD hydra 13.0-CURRENT FreeBSD 13.0-CURRENT r350114 GENERIC powerpc powerpc64 1300036 1200086 That is a bloody mess I know.=20 hydra# pciconf -lv vgapci0@pci0:10:0:0: class=3D0x030000 card=3D0x001010de chip=3D0x014110d= e rev=3D0xa2 hdr=3D0x00 vendor =3D 'NVIDIA Corporation' device =3D 'NV43 [GeForce 6600]' class =3D display subclass =3D VGA pcib2@pci1:0:1:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0130116= 6 rev=3D0xa3 hdr=3D0x01 vendor =3D 'Broadcom' device =3D 'BCM5780 [HT2000] PCI-X bridge' class =3D bridge subclass =3D PCI-PCI pcib3@pci1:0:2:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0130116= 6 rev=3D0xa3 hdr=3D0x01 vendor =3D 'Broadcom' device =3D 'BCM5780 [HT2000] PCI-X bridge' class =3D bridge subclass =3D PCI-PCI pcib4@pci1:0:3:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0132116= 6 rev=3D0xa3 hdr=3D0x01 vendor =3D 'Broadcom' device =3D 'BCM5780 [HT2000] PCI-Express Bridge' class =3D bridge subclass =3D PCI-PCI pcib5@pci1:0:4:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0132116= 6 rev=3D0xa3 hdr=3D0x01 vendor =3D 'Broadcom' device =3D 'BCM5780 [HT2000] PCI-Express Bridge' class =3D bridge subclass =3D PCI-PCI pcib6@pci1:0:5:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0132116= 6 rev=3D0xa3 hdr=3D0x01 vendor =3D 'Broadcom' device =3D 'BCM5780 [HT2000] PCI-Express Bridge' class =3D bridge subclass =3D PCI-PCI pcib7@pci1:0:6:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0132116= 6 rev=3D0xa3 hdr=3D0x01 vendor =3D 'Broadcom' device =3D 'BCM5780 [HT2000] PCI-Express Bridge' class =3D bridge subclass =3D PCI-PCI pcib8@pci1:0:7:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0053106= b rev=3D0x00 hdr=3D0x01 vendor =3D 'Apple Inc.' device =3D 'Shasta PCI Bridge' class =3D bridge subclass =3D PCI-PCI pcib9@pci1:0:8:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0054106= b rev=3D0x00 hdr=3D0x01 vendor =3D 'Apple Inc.' device =3D 'Shasta PCI Bridge' class =3D bridge subclass =3D PCI-PCI pcib10@pci1:0:9:0: class=3D0x060400 card=3D0x00000000 chip=3D0x0055106= b rev=3D0x00 hdr=3D0x01 vendor =3D 'Apple Inc.' device =3D 'Shasta PCI Bridge' class =3D bridge subclass =3D PCI-PCI bge0@pci1:5:4:0: class=3D0x020000 card=3D0x0085106b chip=3D0x166a14e= 4 rev=3D0x03 hdr=3D0x00 vendor =3D 'Broadcom Inc. and subsidiaries' device =3D 'NetXtreme BCM5780 Gigabit Ethernet' class =3D network subclass =3D ethernet bge1@pci1:5:4:1: class=3D0x020000 card=3D0x0085106b chip=3D0x166a14e= 4 rev=3D0x03 hdr=3D0x00 vendor =3D 'Broadcom Inc. and subsidiaries' device =3D 'NetXtreme BCM5780 Gigabit Ethernet' class =3D network subclass =3D ethernet none0@pci1:2:15:0: class=3D0x020000 card=3D0x00000000 chip=3D0x0051106= b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Inc.' device =3D 'Shasta (Sun GEM)' class =3D network subclass =3D ethernet macio0@pci1:1:7:0: class=3D0xff0000 card=3D0x00000000 chip=3D0x004f106= b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Inc.' device =3D 'Shasta Mac I/O' ohci0@pci1:1:11:0: class=3D0x0c0310 card=3D0x00351033 chip=3D0x0035103= 3 rev=3D0x43 hdr=3D0x00 vendor =3D 'NEC Corporation' device =3D 'OHCI USB Controller' class =3D serial bus subclass =3D USB ohci1@pci1:1:11:1: class=3D0x0c0310 card=3D0x00351033 chip=3D0x0035103= 3 rev=3D0x43 hdr=3D0x00 vendor =3D 'NEC Corporation' device =3D 'OHCI USB Controller' class =3D serial bus subclass =3D USB ehci0@pci1:1:11:2: class=3D0x0c0320 card=3D0x00e01033 chip=3D0x00e0103= 3 rev=3D0x04 hdr=3D0x00 vendor =3D 'NEC Corporation' device =3D 'uPD72010x USB 2.0 Controller' class =3D serial bus subclass =3D USB atapci0@pci1:3:12:0: class=3D0x01018f card=3D0x02401166 chip=3D0x0240116= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'Broadcom' device =3D 'K2 SATA' class =3D mass storage subclass =3D ATA ata0@pci1:3:13:0: class=3D0xff0000 card=3D0x00000000 chip=3D0x0050106= b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Inc.' device =3D 'Shasta IDE' fwohci0@pci1:3:14:0: class=3D0x0c0010 card=3D0x5811106b chip=3D0x0052106= b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Inc.' device =3D 'Shasta Firewire' class =3D serial bus subclass =3D FireWire hydra#=20 So then looking at /var/run/dmesg.boot which I may as well paste here :=20 ---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT r350114 GENERIC powerpc gcc version 4.2.1 20070831 patched [FreeBSD] WARNING: WITNESS option enabled, expect reduced performance. VT(ofwfb): resolution 1280x1024 cpu0: IBM PowerPC 970MP revision 1.1, 2500.34 MHz cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> real memory =3D 8539713536 (8144 MB) avail memory =3D 8131776512 (7755 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface 000.000015 [4254] netmap_init netmap: loaded module kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> on nexus0 unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwb= us0 unin0: Version 66 pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0 pci0: <OFW PCI bus> on pcib0 pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 pcib1: 86 HT IRQs on device 7.0 pci1: <OFW PCI bus> on pcib1 pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0 pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1 pci3: <OFW PCI bus> on pcib3 pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1 pci4: <OFW PCI bus> on pcib4 pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1 pci5: <OFW PCI bus> on pcib5 pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1 pci6: <OFW PCI bus> on pcib6 pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1 pci7: <OFW PCI bus> on pcib7 pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1 pci8: <OFW PCI bus> on pcib8 pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1 pci9: <OFW PCI bus> on pcib9 macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on = pci9 macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1 pci10: <OFW PCI bus> on pcib10 htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 pcr0: <PPC 970 Power Control Register> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 pcr1: <PPC 970 Power Control Register> on cpu1 cpu2: <Open Firmware CPU> on cpulist0 pcr2: <PPC 970 Power Control Register> on cpu2 cpu3: <Open Firmware CPU> on cpulist0 pcr3: <PPC 970 Power Control Register> on cpu3 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 468, bank1 generation 467 iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0 ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0 max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0 max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0 vgapci0: <VGA-compatible display> mem 0xa1000000-0xa1ffffff,0x90000000-0x9fffffff,0xa0000000-0xa0ffffff irq 3 at device 0.0 on pci0 vgapci0: Boot video device bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3 bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus0: <MII bus> on bge0 brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:14:51:64:67:10 bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3 bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus1: <MII bus> on bge1 brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:14:51:64:67:11 gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0= on pci8 gem0: invalid MAC address device_attach: gem0 attach returned 6 scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0 uart0: <z8530, channel A> on scc0 uart1: <z8530, channel B> on scc0 iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0 iicbus1: <OFW I2C bus> on iichb1 iic1: <I2C generic I/O> on iicbus1 onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1 iicbus1: <unknown card> at addr 0x24 pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on macio0 ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at de= vice 11.0 on pci9 usbus0 on ohci0 ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at de= vice 11.1 on pci9 usbus1 on ohci1 ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 70= at device 11.2 on pci9 usbus2: EHCI version 1.0 usbus2 on ehci0 atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq = 10 at device 12.0 on pci10 pcib1: failed to reserve resource for pcib10 atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at device 13.0 on pci10 fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff ir= q 39 at device 14.0 on pci10 fwohci0: OHCI version 1.0 (ROM=3D0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:24:ff:fe:e5:13:d0 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:24:e5:13:d0 fwe0: Ethernet address: 02:11:24:e5:13:d0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound =3D 0x00000000 fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D1, CYCLEMAS= TER mode smu0: <Apple System Management Unit> on ofwbus0 smu0: registered as a time-of-day clock, resolution 0.001000s iichb2: <SMU I2C controller> on smu0 iicbus2: <OFW I2C bus> on iichb2 iic2: <I2C generic I/O> on iicbus2 smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2 smusat1: <SMU Satellite Sensors> at addr 0xb2 on iicbus2 iicbus2: <unknown card> at addr 0xd4 iichb3: <SMU I2C controller> on smu0 iicbus3: <OFW I2C bus> on iichb3 iic3: <I2C generic I/O> on iicbus3 cryptosoft0: <software crypto> on nexus0 Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1) (me)=20 firewire0: bus manager 1=20 bge0: link state changed to UP usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 max66900: 2 sensors detected. max66901: 2 sensors detected. ugen1.1: <NEC OHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <NEC OHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <NEC EHCI root HUB> at usbus2 uhub2 on usbus2 uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub0: 2 ports with 2 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub2: 5 ports with 5 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <ST380013AS 3.00> ATA-6 SATA 1.x device ada0: Serial Number 4MR3C8TG ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors) Launching APs: 1 2 3 Trying to mount root from ufs:/dev/ada0s3 [rw]... cd0 at ata0 bus 0 scbus4 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device cd0: Serial Number M0063NE3358 cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: 3267MB (1672851 2048 byte sectors) WARNING: WITNESS option enabled, expect reduced performance. ugen1.2: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus1 ukbd0 on uhub0 ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 kbd1 at ukbd0 uhid0 on uhub0 uhid0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus1 Deprecated code (to be removed in FreeBSD 14): FreeBSD 12.x ABI compat Deprecated code (to be removed in FreeBSD 14): FreeBSD 12.x ABI compat lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP hydra#=20 I will try to get the Openfirmware data from the usual keyboard vulkan grip on five or six keys as I power then beast(s) on.=20 Dennis --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-239245-227-KdMEMg5eay>