Date: Fri, 17 Jun 2005 14:19:41 +0200 From: "GMane" <riccardo.tonon@srlabs.it> To: freebsd-stable@freebsd.org Subject: Re: rebooting problem Message-ID: <d8uepc$eea$1@sea.gmane.org> References: <d8u6gp$jt6$1@sea.gmane.org> <D3A42022-823A-47DB-9EA3-2FC4B49067FA@cian.ws>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Cian,
"Cian Hughes" <cianlists@cian.ws> wrote in message
news:D3A42022-823A-47DB-9EA3-2FC4B49067FA@cian.ws...
> Do you also have a hanging problem if you shutdown with `shutdown -p
> now`?
No, the problem it's only with the reboot command.
> Are you using ACPI?
> Have you ensured you are using the latest BIOS for you system?
I turned off the ACPI from the BIOS. (but from the dmesg it seems on)
> When did you last compile your kernel?
when I upgraded the system to the Freebsd-5.4
> Could you give some specifics about architecture, output of dmesg and
> your hardware setup.
The dmesg output:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #5: Mon May 16 12:21:11 CEST 2005
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.40GHz (2394.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SS
E,SSE2,SS,HTT,TM,PBE>
real memory = 268419072 (255 MB)
avail memory = 253014016 (241 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4SP-MX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 651 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0
on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962 UDMA133 controller> port
0xa400-0xa40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 2.5 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fff irq 12 at device
3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 3 at device
3.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 3.3 (no driver attached)
sis0: <SiS 900 10/100BaseTX> port 0x8800-0x88ff mem 0xe5800000-0xe5800fff at
device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:11:2f:99:20:2f
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x8400-0x847f mem
0xe5000000-0xe500007f irq 10 at device 16.0 on pci0
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:0a:5e:50:0b:46
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd07ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
fdc0: cannot allocate I/O port (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2394010647 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38166MB <ST340012A/3.31> [77545/16/63] at ata0-master UDMA100
acd0: CDROM <GCR-8523B/1.03> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default
to deny, logging disabled
Thank You,
Regards, Ricki
>
> Regards, Cian
>
> On 17 Meith 2005, at 10:58, GMane wrote:
>
>> Hi,
>>
>> When I try to reboot my machine it hangs on and I have to do it manually
>> pressing the reset button.
>>
>> Did anyone have the same problem?
>> Do You think that is an hardware problem?
>>
>> I thank you all!
>>
>> Ricki
>>
>>
>>
>> _______________________________________________
>> freebsd-stable@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> To unsubscribe, send any mail to "freebsd-stable-
>> unsubscribe@freebsd.org"
>>
>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d8uepc$eea$1>