Date: Sat, 08 May 2010 13:04:48 -0400 From: joe <joe@hostedcontent.com> To: Jack Vogel <jfvogel@gmail.com> Cc: Ian FREISLICH <ianf@clue.co.za>, Fabien Thomas <fabien.thomas@netasq.com>, freebsd-current@freebsd.org Subject: Re: igb broken? Unexplained weirdness with intel 82576 nics on a supermicro board. Message-ID: <4BE599B0.60203@hostedcontent.com> In-Reply-To: <AANLkTikLmEwr15mPz9Hz1kB97dXUNhkOS8R47d68rm1z@mail.gmail.com> References: <4BE565E5.9030505@hostedcontent.com> <4BE5303B.8050409@hostedcontent.com> <4BE529FF.5000008@hostedcontent.com> <C15B47BC-AF5F-4AF4-899C-98155EC5A4D4@netasq.com> <E1OAhhO-00021o-DH@clue.co.za> <E1OAlmh-0002Dj-Mm@clue.co.za> <4BE59434.9070308@hostedcontent.com> <AANLkTikLmEwr15mPz9Hz1kB97dXUNhkOS8R47d68rm1z@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 05/08/2010 01:31 PM, Jack Vogel wrote: > Looks like something to do with system C, you might isolate it, and try > a back > to back connection with its NICs, change cables, look at BIOS settings, > change > the slot the nic is in... All just off the top of my head. > > Jack > > > On Sat, May 8, 2010 at 9:41 AM, joe <joe@hostedcontent.com > <mailto:joe@hostedcontent.com>> wrote: > > On 05/08/2010 11:17 AM, Ian FREISLICH wrote: > > joe wrote: > > On 05/08/2010 06:55 AM, Ian FREISLICH wrote: > > joe wrote: > > I have just tried your suggeston and it has > no effect for me ;( > > > Do you have another brand of NIC that you can try? At > least that > will isolate whether it's igb(4) or something else. > > > I will grab a new nic today and try...my options are limited > though. > Here are the nics i can get my hands on > > TP-LINK TL-TG3468, 10/100/1000Mbps PCIe Adapter (supported > by fbsd?) > > > Based on the RTL8168B chip. Should be supported by the re(4) > driver. > > Intel (EXPI9301CT) Gigabit CT Desktop Adapter (yet another > intel nic) > > > i82574L chip. Should be supported by the em(4) driver. I have had > good performance in the past with this driver and less than > satisfactory performance with the igb(4) driver. > > That may not be your problem though. Before you go out and buy, > have a look at the amount of interrupt time your slow machine spends > in 'top' or 'systat -vm'. systat will also show the interrupt rate > for each driver, perhaps it's not doing interrupt moderation > properly. > This will manifest as more than about a 1000 per second. There are > loader tunables for the driver to increase the number of transfer > descriptors and to tune interrupt moderation. > > You could try running trafshow (port) on the interface while > performing the transfer. Perhaps promiscuous mode will turn off > some hardware feature that will improve things. It may however > break hardware vlanning as it does on my 82575GB 4 port igb card. > > Ian > > -- > Ian Freislich > > > I bought those two cards anyways, im in a rush to figure out this > problem. That being said i am still encountering the exact same > problem regardless on which network card i am running. I am at a > complete loss. I am about to try a raid card to see if the problem > might lay within the onboard sata ports. I did pull the server and > brought it home so that i can test more things quicker. > > I am going to try using a raid card instead of the onboard sata > ports and see if i still encounter the same problem. I would love > any suggestions you may have on where to go from here to figure out > where the problem might be. > > joe > > _______________________________________________ > freebsd-current@freebsd.org <mailto:freebsd-current@freebsd.org> > mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to > "freebsd-current-unsubscribe@freebsd.org > <mailto:freebsd-current-unsubscribe@freebsd.org>" > > I think it might have something to so with the nics / switch, and their features. I brought the box home, plugged into my gb switch, and i am able to FTP data to the server at around 35MB/sec. I dont know what would cause this other than some sort of issue with the the 3 different types of nics and the switch i am using. Any suggestions?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BE599B0.60203>