Date: Thu, 16 Apr 1998 14:43:19 -0600 (MDT) From: Sasha Egan <wildcard@dax.belen.k12.nm.us> To: danny@FreeBSD.ORG, freebsd-isp@FreeBSD.ORG, brian@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: PPP:PAP:WIN95:FreeBSD Message-ID: <Pine.BSF.3.96.980416140209.1029A-100000@dax.belen.k12.nm.us>
next in thread | raw e-mail | index | archive | help
Alrighty,
I have tried everything in my experience and I just can't make this darn
thing work.
I have followed the instructions that are included in the pppkit.tgz file,
with very little results.
The results that I got was a PAP connect using win95 as the client. PPP
shells out but you are not able to go anywhere, ( i.e. you try to telnet
and no host can be found even if you try it using IP as the address.
I really need some help on this.
I have the clients setup as follows:
Under dialup networking Icon.
Under the properties, under SERVER TYPES I have PPP:WINDOWS95, WINDOWS NT
3.5, INTERNET
Under advanced options I have,
Log onto network clicked although I have tried it unclicked.
Enable Software compression clicked although I have tried it unclicked.
Require encrypted password unclicked.
Allowed network protocols
NetBEUI, unclicked
IPX/SPX, unclicked
TCPIP, clicked
Under TCPIP settings:
SERVER assigned IP address, clicked
SERVER assigned name server addresses clicked, although I have tried to
hardwire the IP of my nameserver in.
USE IP header compression, clicked, but I have tried it unclicked.
USE default gateway on remote network, clicked, but have tried it
unclicked.
Under DIALUP NETWORKING:
under connections.
Show an Icon on taskbar...clicked
Prompt for info...........clicked
Show a conformation ......clicked
Prompt to use Dial-UP Networking...Clicked
I have Client for Microsoft Networks installed.
I have TCPIP installed and I have a Dial-Up adapter bound to TCP/IP
On the host side I have the following setup:
I have the hacked version of pppd installed in /usr/sbin
bash$ ls -al pppd
-r-sr-xr-x 1 root bin 77824 Apr 16 11:28 pppd
I I have the ppplogin.sh and fancyppplogin.sh in /usr/local/bin
bash$ ls -al *ppp*
-rwxr-xr-x 1 root wheel 2040 Apr 16 09:29 fancyppplogin.sh
-rwxr-xr-x 1 root wheel 1533 Apr 16 09:29 ppplogin.sh
I have the appropriate options set in /etc/ppp
bash$ cat /etc/ppp/options
dns1 192.168.1.1
proxyarp
I have appropriate gettytab entries.
std.38400|38400-baud:\
:np:sp#38400:pp=/usr/local/bin/fancyppplogin.sh
std.57600|57600-baud:\
:np:sp#57600:pp=/usr/local/bin/fancyppplogin.sh
std.115200|115200-baud:\
:np:sp#115200:pp=/usr/local/bin/fancyppplogin.sh
I have all the shells set in ppp.shells
I have prewt ( my test ppp account ) shell set as /pppok
I cannot think of anything else that would cause this not to work when I
dial, an error appears in about 60 seconds.
Dial-Up Networking could not negotiate a compatible set of network
protocols you specified in the Server Type Settings. Check network
configuration in the Control panel then try again...
Uhm...I dunno about this but Microsoft Networking seems to be broken in a
whole lot of frigging places.
I would appreciate some help on this...I am about a millimeter from
loosing my mind.
Sasha Egan
wildcard@belen.k12.nm.us.
Network Technician.
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2
mQCNAzQ+Te4AAAEEAMOfXAPvy7YTmgOG+RtdddihcXnlSjuO8AqkaIoGM9rLvkRj
XF0GY4zWlSFDR5QQU8agfyQ8YARl9ICxg8g64cm8Ejyhi87014mYcLx6j/Z4kgBp
oyTCJLELjOb1mdmloMsNoiXoU7iYG8/Wnz9Hf9uCC0FE0S3A57JEJYo0aRu1AAUR
tBh3aWxkY2FyZEBiZWxlbi5rMTIubm0udXM=
=4A/3
-----END PGP PUBLIC KEY BLOCK-----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980416140209.1029A-100000>