Date: Mon, 29 Apr 2002 12:00:19 -0500 (CDT) From: John Utz <john@utzweb.net> To: Larry Rosenman <ler@airmail.net> Cc: freebsd-stable@FreeBSD.ORG, <freebsd-mobile@FreeBSD.ORG> Subject: Re: New Laptop: i810: HELP Message-ID: <Pine.LNX.4.44.0204291158040.6387-100000@jupiter.linuxengine.net> In-Reply-To: <20020429164649.GA176@lerlaptop.iadfw.net>
next in thread | previous in thread | raw e-mail | index | archive | help
well xf86 reports an illegal opcode. that's bad.
start turning things off. gamma correction wold be a good place to
start....make sure it's not loading drm/dri....too.
thisd just going to be a tweak and retry sorta thing...
On Mon, 29 Apr 2002, Larry Rosenman wrote:
> * Larry Rosenman <ler@lerctr.org> [020429 09:43]:
> > I bought myself a new laptop yesterday, and am having issues
> > getting XFree86 4.2.0 to initialize. The issue appears to be
> > the /dev/agpgart device says it's not configured, although the
> > Laptop has the I830M chips, and I loaded agp.ko in /boot/loader.conf
>
> It's a Fujitsu C6651 LapTop, if anyone cares, 256MB mem, P-IIIM at 1.13Ghz
> 20GB HDD, and 4 USB ports (which, apparently we need to update the driver
> for, but that's a different thread, after we get X running).
>
> The XFree86 is 4.2.0, installed via the PACKAGES.
>
> Following up to myself...
>
> Made SOME progress...
> We still die, but it's closer.
>
> Any of y'all have any ideas?
>
>
> with this patch in /usr/src/sys/pci/agp_i810.c:
>
> --- agp_i810.c.orig Thu Oct 19 05:36:27 2000
> +++ agp_i810.c Mon Apr 29 11:28:02 2002
> @@ -87,6 +87,9 @@
>
> case 0x11328086:
> return ("Intel 82815 (i815 GMCH) SVGA controller");
> +
> + case 0x35778086:
> + return ("Intel 82830M (i830M GMCH) SVGA controller");
> };
>
> return NULL;
> @@ -116,6 +119,10 @@
> case 0x11328086:
> devid = 0x11308086;
> break;
> +
> + case 0x35778086:
> + devid = 0x35758086;
> + break;
> };
> if (device_get_children(device_get_parent(dev), &children, &nchildren))
> return 0;
> @@ -150,12 +157,14 @@
> }
>
> smram = pci_read_config(bdev, AGP_I810_SMRAM, 1);
> +#if 0
> if ((smram & AGP_I810_SMRAM_GMS)
> == AGP_I810_SMRAM_GMS_DISABLED) {
> if (bootverbose)
> printf("I810: disabled, not probing\n");
> return ENXIO;
> }
> +#endif
>
> device_verbose(dev);
> device_set_desc(dev, desc);
>
>
> I get the following XFree86 log:
>
>
> XFree86 Version 4.2.0 / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 18 January 2002
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/)
> Build Operating System: FreeBSD 4.5 i386 [ELF]
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 29 11:38:43 2002
> (==) Using config file: "/etc/X11/XF86Config"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "My Monitor"
> (**) | |-->Device "Intel 810-1"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc104"
> (**) XKB: model: "pc104"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (==) Keyboard: CustomKeycode disabled
> (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.1
> XFree86 Video Driver: 0.5
> XFree86 XInput driver : 0.3
> XFree86 Server Extension : 0.1
> XFree86 Font Renderer : 0.3
> (II) Loader running on freebsd
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 8086,3575 card 10cf,113b rev 04 class 06,00,00 hdr 00
> (II) PCI: 00:02:0: chip 8086,3577 card 10cf,113c rev 04 class 03,00,00 hdr 80
> (II) PCI: 00:02:1: chip 8086,3577 card 10cf,113c rev 00 class 03,80,00 hdr 80
> (II) PCI: 00:1d:0: chip 8086,2482 card 10cf,113d rev 02 class 0c,03,00 hdr 80
> (II) PCI: 00:1d:1: chip 8086,2484 card 10cf,113d rev 02 class 0c,03,00 hdr 00
> (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01
> (II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80
> (II) PCI: 00:1f:1: chip 8086,248a card 10cf,113d rev 02 class 01,01,8a hdr 00
> (II) PCI: 00:1f:3: chip 8086,2483 card 10cf,113d rev 02 class 0c,05,00 hdr 00
> (II) PCI: 00:1f:5: chip 8086,2485 card 10cf,112f rev 02 class 04,01,00 hdr 00
> (II) PCI: 00:1f:6: chip 8086,2486 card 10cf,10d1 rev 02 class 07,03,00 hdr 00
> (II) PCI: 01:0a:0: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82
> (II) PCI: 01:0a:1: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82
> (II) PCI: 01:0d:0: chip 10ec,8139 card 10cf,111c rev 10 class 02,00,00 hdr 00
> (II) PCI: 01:0e:0: chip 10cf,2010 card 10cf,112b rev 01 class 0c,00,10 hdr 00
> (II) PCI: End of PCI scan
> (II) LoadModule: "scanpci"
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (II) Host-to-PCI bridge:
> (II) PCI-to-ISA bridge:
> (II) PCI-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 1: bridge is at (0:30:0), (0,1,3), BCTRL: 0x04 (VGA_EN is cleared)
> (II) Bus 1 I/O range:
> [0] -1 0x00002000 - 0x000020ff (0x100) IX[B]
> [1] -1 0x00002400 - 0x000024ff (0x100) IX[B]
> [2] -1 0x00002800 - 0x000028ff (0x100) IX[B]
> [3] -1 0x00002c00 - 0x00002cff (0x100) IX[B]
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0xe0200000 - 0xe02fffff (0x100000) MX[B]
> (II) Bus 1 prefetchable memory range:
> (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus -1 I/O range:
> (II) Bus -1 non-prefetchable memory range:
> (II) Bus -1 prefetchable memory range:
> (--) PCI:*(0:2:0) Intel i830M rev 4, Mem @ 0xe8000000/27, 0xe0000000/19
> (--) PCI: (0:2:1) Intel i830M rev 0, Mem @ 0xf0000000/27, 0xe0080000/19
> (II) Addressable bus resource ranges are
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> [0] -1 0xe0200000 - 0xe03fffff (0x200000) MX[B]E
> [1] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E
> [2] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> [3] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> [4] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> [5] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> [6] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [7] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
> [8] -1 0x00001800 - 0x000018ff (0x100) IX[B]E
> [9] -1 0x00001400 - 0x000014ff (0x100) IX[B]E
> [10] -1 0x00001880 - 0x000018ff (0x80) IX[B]E
> [11] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
> [12] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
> [13] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E
> [14] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
> [15] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
> [16] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
> [17] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
> [18] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E
> [19] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
> (II) PCI Memory resource overlap reduced 0xe0200000 from 0xe03fffff to 0xe02007ff
> (II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000187f
> (II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x000018bf
> (II) PCI I/O resource overlap reduced 0x00001c00 from 0x00001cff to 0x00001c1f
> (II) PCI I/O resource overlap reduced 0x000018c0 from 0x000018ff to 0x000018df
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E
> [1] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E
> [2] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> [3] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> [4] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> [5] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> [6] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [7] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
> [8] -1 0x00001800 - 0x0000187f (0x80) IX[B]E
> [9] -1 0x00001400 - 0x000014ff (0x100) IX[B]E
> [10] -1 0x00001880 - 0x000018bf (0x40) IX[B]E
> [11] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
> [12] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E
> [13] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E
> [14] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
> [15] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
> [16] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
> [17] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
> [18] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E
> [19] -1 0x000018c0 - 0x000018df (0x20) IX[B]E
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E
> [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E
> [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
> [15] -1 0x00001800 - 0x0000187f (0x80) IX[B]E
> [16] -1 0x00001400 - 0x000014ff (0x100) IX[B]E
> [17] -1 0x00001880 - 0x000018bf (0x40) IX[B]E
> [18] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
> [19] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E
> [20] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E
> [21] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
> [22] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
> [23] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
> [24] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
> [25] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E
> [26] -1 0x000018c0 - 0x000018df (0x20) IX[B]E
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.1
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.1.10
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font FreeType
> (II) LoadModule: "i810"
> (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
> (II) Module i810: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.1.0
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.5
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.3
> (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815,
> i830M
> (II) Primary Device is: PCI 00:02:0
> (--) Assigning device section with no busID to primary device
> (WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
> (--) Chipset i830M found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E
> [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E
> [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
> [15] -1 0x00001800 - 0x0000187f (0x80) IX[B]E
> [16] -1 0x00001400 - 0x000014ff (0x100) IX[B]E
> [17] -1 0x00001880 - 0x000018bf (0x40) IX[B]E
> [18] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
> [19] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E
> [20] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E
> [21] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
> [22] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
> [23] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
> [24] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
> [25] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E
> [26] -1 0x000018c0 - 0x000018df (0x20) IX[B]E
> (II) resource ranges after probing:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E
> [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E
> [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
> [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
> [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
> [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
> [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [17] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
> [18] -1 0x00001800 - 0x0000187f (0x80) IX[B]E
> [19] -1 0x00001400 - 0x000014ff (0x100) IX[B]E
> [20] -1 0x00001880 - 0x000018bf (0x40) IX[B]E
> [21] -1 0x00001000 - 0x000010ff (0x100) IX[B]E
> [22] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E
> [23] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E
> [24] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
> [25] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
> [26] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
> [27] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
> [28] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E
> [29] -1 0x000018c0 - 0x000018df (0x20) IX[B]E
> [30] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [31] 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (**) I810(0): Depth 24, (--) framebuffer bpp 32
> (==) I810(0): RGB weight 888
> (==) I810(0): Default visual is TrueColor
> (==) I810(0): Write-combining range (0xa0000,0x20000) was already clear
> (==) I810(0): Write-combining range (0xf0000,0x10000)
> (WW) I810(0): Bad V_BIOS checksum
> (II) I810(0): Primary V_BIOS segment is: 0xc000
> (--) I810(0): Chipset: "i830"
> (--) I810(0): Linear framebuffer at 0xE8000000
> (--) I810(0): IO registers at addr 0xE0000000
> (II) I810(0): detected 8192K stolen memory.
> (II) I810(0): I810CheckAvailableMemory: 208896k available
> (==) I810(0): Will alloc AGP framebuffer: 8192 kByte
> (==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
> c000:01a2: 62 ILLEGAL X86 OPCODE!
> (II) I810(0): Failed to detect active display devices
> (EE) I810(0): Couldn't detect display devices.
> (II) UnloadModule: "i810"
> (II) UnloadModule: "int10"
> (II) Unloading /usr/X11R6/lib/modules/libint10.a
> (II) UnloadModule: "vgahw"
> (II) Unloading /usr/X11R6/lib/modules/libvgahw.a
> (EE) Screen(s) found, but none have a usable configuration.
>
> Fatal server error:
> no screens found
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to xfree86@xfree86.org.
>
>
> Here is a verbose dmesg:
>
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.5-STABLE #14: Mon Apr 29 11:31:10 CDT 2002
> ler@lerlaptop:/usr/obj/usr/src/sys/LERLAPTOP
> Calibrating clock(s) ... TSC clock: 1129562703 Hz, i8254 clock: 1193174 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz
> CLK_USE_TSC_CALIBRATION not specified - using old calibration method
> CPU: Pentium III/Pentium III Xeon/Celeron (1129.58-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory = 259522560 (253440K bytes)
> Physical memory chunk(s):
> 0x00001000 - 0x0009efff, 647168 bytes (158 pages)
> 0x003be000 - 0x0f6dffff, 254943232 bytes (62242 pages)
> 0x0f700000 - 0x0f777fff, 491520 bytes (120 pages)
> avail memory = 248741888 (242912K bytes)
> bios32: Found BIOS32 Service Directory header at 0xc00f63d0
> bios32: Entry = 0xfd850 (c00fd850) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0x11e
> pnpbios: Found PnP BIOS data at 0xc00f6420
> pnpbios: Entry = f0000:92bd Rev = 1.0
> Other BIOS signatures found:
> ACPI: 000f6400
> Preloaded elf kernel "kernel" at 0xc0397000.
> Preloaded elf module "agp.ko" at 0xc03970a8.
> Preloaded elf module "accf_data.ko" at 0xc0397144.
> Preloaded elf module "accf_http.ko" at 0xc03971e8.
> Pentium Pro MTRR support enabled
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
> Using $PIR table, 9 entries at 0xc00fdf30
> apm0: <APM BIOS> on motherboard
> apm: found APM BIOS v1.2, connected at v1.2
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> found-> vendor=0x8086, dev=0x3575, revid=0x04
> class=06-00-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> map[10]: type 1, range 32, base 00000000, size 0
> found-> vendor=0x8086, dev=0x3577, revid=0x04
> class=03-00-00, hdrtype=0x00, mfdev=1
> subordinatebus=0 secondarybus=0
> intpin=a, irq=11
> map[10]: type 1, range 32, base e8000000, size 27
> map[14]: type 1, range 32, base e0000000, size 19
> found-> vendor=0x8086, dev=0x3577, revid=0x00
> class=03-80-00, hdrtype=0x00, mfdev=1
> subordinatebus=0 secondarybus=0
> map[10]: type 1, range 32, base f0000000, size 27
> map[14]: type 1, range 32, base e0080000, size 19
> found-> vendor=0x8086, dev=0x2482, revid=0x02
> class=0c-03-00, hdrtype=0x00, mfdev=1
> subordinatebus=0 secondarybus=0
> intpin=a, irq=11
> map[20]: type 1, range 32, base 000018c0, size 5
> found-> vendor=0x8086, dev=0x2484, revid=0x02
> class=0c-03-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=b, irq=11
> map[20]: type 1, range 32, base 000018e0, size 5
> found-> vendor=0x8086, dev=0x2448, revid=0x42
> class=06-04-00, hdrtype=0x01, mfdev=0
> subordinatebus=3 secondarybus=1
> found-> vendor=0x8086, dev=0x248c, revid=0x02
> class=06-01-00, hdrtype=0x00, mfdev=1
> subordinatebus=0 secondarybus=0
> found-> vendor=0x8086, dev=0x248a, revid=0x02
> class=01-01-8a, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=a, irq=255
> map[10]: type 1, range 32, base 000001f0, size 3
> map[14]: type 1, range 32, base 000003f4, size 2
> map[18]: type 1, range 32, base 00000170, size 3
> map[1c]: type 1, range 32, base 00000374, size 2
> map[20]: type 1, range 32, base 00001c20, size 4
> map[24]: type 1, range 32, base e0100000, size 10
> found-> vendor=0x8086, dev=0x2483, revid=0x02
> class=0c-05-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=b, irq=11
> map[20]: type 1, range 32, base 00001c00, size 5
> found-> vendor=0x8086, dev=0x2485, revid=0x02
> class=04-01-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=b, irq=11
> map[10]: type 1, range 32, base 00001000, size 8
> map[14]: type 1, range 32, base 00001880, size 6
> found-> vendor=0x8086, dev=0x2486, revid=0x02
> class=07-03-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=b, irq=11
> map[10]: type 1, range 32, base 00001400, size 8
> map[14]: type 1, range 32, base 00001800, size 7
> pci0: <PCI bus> on pcib0
> agp0: <Intel 82830M (i830M GMCH) SVGA controller> mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 11 at device 2.0 on pci0
> agp0: allocating GATT for aperture of size 32M
> pci0: <unknown card> (vendor=0x8086, dev=0x3577) at 2.1
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x18c0-0x18df irq 11 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x18e0-0x18ff irq 11 at device 29.1 on pci0
> using shared irq11.
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
> found-> vendor=0x104c, dev=0xac55, revid=0x01
> class=06-07-00, hdrtype=0x02, mfdev=1
> subordinatebus=2 secondarybus=2
> intpin=a, irq=11
> found-> vendor=0x104c, dev=0xac55, revid=0x01
> class=06-07-00, hdrtype=0x02, mfdev=1
> subordinatebus=3 secondarybus=3
> intpin=b, irq=11
> found-> vendor=0x10ec, dev=0x8139, revid=0x10
> class=02-00-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=a, irq=11
> map[10]: type 1, range 32, base 00002000, size 8
> map[14]: type 1, range 32, base e0200800, size 8
> found-> vendor=0x10cf, dev=0x2010, revid=0x01
> class=0c-00-10, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=a, irq=11
> map[10]: type 1, range 32, base e0200000, size 11
> pci1: <PCI bus> on pcib1
> Found unknown YENTA PCI-CARDBUS Bridge devid 0xac55104c
> pcic0: <YENTA PCI-CARDBUS Bridge> irq 11 at device 10.0 on pci1
> pcic0: PCI Memory allocated: 0x44000000
> pcic0: PCI Configuration space:
> 0x00: 0xac55104c 0x02100007 0x06070001 0x00824008
> 0x10: 0x44000000 0x020000a0 0x00020201 0x00000000
> 0x20: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b
> 0x40: 0x116410cf 0x00000001 0x00000000 0x00000000
> 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x80: 0x00649060 0x00000000 0x00000000 0x01c61d22
> 0x90: 0x404682c0 0x00000000 0x00000000 0x00000000
> 0xa0: 0xfe120001 0x00c00000 0x00000004 0x0000000b
> 0xb0: 0x09000000 0x00000000 0x00000000 0x00000000
> 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> pccard0: <PC Card bus (classic)> on pcic0
> Found unknown YENTA PCI-CARDBUS Bridge devid 0xac55104c
> pcic1: <YENTA PCI-CARDBUS Bridge> irq 11 at device 10.1 on pci1
> pcic1: PCI Memory allocated: 0x44001000
> pcic1: PCI Configuration space:
> 0x00: 0xac55104c 0x02100007 0x06070001 0x00824008
> 0x10: 0x44001000 0x020000a0 0x00030301 0x00000000
> 0x20: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x30: 0x00000000 0x00000000 0x00000000 0x07e0020b
> 0x40: 0x116410cf 0x00000001 0x00000000 0x00000000
> 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x80: 0x00649060 0x00000000 0x00000000 0x01c61d22
> 0x90: 0x404683c0 0x00000000 0x00000000 0x00000000
> 0xa0: 0xfe120001 0x00c00000 0x00000804 0x0000000b
> 0xb0: 0x09000000 0x00000000 0x00000000 0x00000000
> 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> pccard1: <PC Card bus (classic)> on pcic1
> rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xe0200800-0xe02008ff irq 11 at device 13.0 on pci1
> rl0: Ethernet address: 00:e0:00:7e:d0:45
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> bpf: rl0 attached
> pci1: <unknown card> (vendor=0x10cf, dev=0x2010) at 14.0 irq 11
> isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 ATA100 controller> port 0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1c20
> ata0: mask=03 ostat0=50 ostat2=00
> ata0-master: ATAPI 00 00
> ata0-slave: ATAPI 00 00
> ata0: mask=03 stat0=50 stat1=00
> ata0-master: ATA 01 a5
> ata0: devices=01
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1c28
> ata1: mask=03 ostat0=50 ostat2=00
> ata1-master: ATAPI 14 eb
> ata1-slave: ATAPI 14 eb
> ata1: mask=03 stat0=00 stat1=00
> ata1: devices=0c
> ata1: at 0x170 irq 15 on atapci0
> ichsmb0: <SMBus controller> port 0x1c00-0x1c1f irq 11 at device 31.3 on pci0
> pcm0: <Intel 82801CA (ICH3)> port 0x1880-0x18bf,0x1000-0x10ff irq 11 at device 31.5 on pci0
> pcm0: ac97 codec id 0x83847656 (SigmaTel STAC9756/9757)
> pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
> pcm0: ac97 primary codec extended features variable rate PCM, reserved 1, AMAP
> pcm0: sndbuf_setmap 29000, 4000; 0xd3bda000 -> 29000
> pcm0: sndbuf_setmap 2d000, 4000; 0xd3bde000 -> 2d000
> pcm0: measured ac97 link rate at 48014 Hz, will use 48000 Hz
> pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
> ata-: ata0 exists, using next available unit number
> ata-: ata1 exists, using next available unit number
> pcic-: pcic0 exists, using next available unit number
> pcic-: pcic1 exists, using next available unit number
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> pnpbios: 17 devices, largest 266 bytes
> PNP0c02: adding io range 0x10-0x18, size=0x9, align=0x1
> PNP0c02: adding io range 0x1f-0x1f, size=0x1, align=0x1
> PNP0c02: adding io range 0x22-0x22, size=0x1, align=0x1
> PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
> PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
> PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
> PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
> PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
> PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
> PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
> PNP0c02: adding io range 0x4e-0x4f, size=0x2, align=0x1
> PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
> PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
> PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
> PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
> PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
> PNP0c02: adding io range 0x90-0x9f, size=0x10, align=0x1
> PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
> PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
> PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
> PNP0c02: adding io range 0xb0-0xbd, size=0xe, align=0x1
> PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
> PNP0c02: adding io range 0xf800-0xf87f, size=0x80, align=0x1
> PNP0c02: adding io range 0xf880-0xf8ff, size=0x80, align=0x1
> PNP0c02: adding io range 0xfc00-0xfc7f, size=0x80, align=0x1
> PNP0c02: adding io range 0xfc80-0xfcbf, size=0x40, align=0x1
> PNP0c02: adding io range 0xfd00-0xfd6f, size=0x70, align=0x1
> PNP0c02: adding io range 0xfe00-0xfe0f, size=0x10, align=0x1
> PNP0c02: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
> PNP0c02: adding fixed memory32 range 0xffb00000-0xffbfffff, size=0x100000
> PNP0c02: end config
> pnpbios: handle 0 device ID PNP0c02 (020cd041)
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
> PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000
> PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
> PNP0c01: end config
> pnpbios: handle 2 device ID PNP0c01 (010cd041)
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
> PNP0c04: adding irq mask 0x2000
> PNP0c04: end config
> pnpbios: handle 3 device ID PNP0c04 (040cd041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
> PNP0800: end config
> pnpbios: handle 4 device ID PNP0800 (0008d041)
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
> PNP0303: adding irq mask 00x2
> PNP0303: end config
> pnpbios: handle 5 device ID PNP0303 (0303d041)
> PNP0200: adding io range 0-0xf, size=0x10, align=0x1
> PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
> PNP0200: adding dma mask 0x10
> PNP0200: end config
> pnpbios: handle 7 device ID PNP0200 (0002d041)
> PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
> PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
> PNP0000: adding irq mask 00x4
> PNP0000: end config
> pnpbios: handle 8 device ID PNP0000 (0000d041)
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
> PNP0100: adding irq mask 00x1
> PNP0100: end config
> pnpbios: handle 9 device ID PNP0100 (0001d041)
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
> PNP0b00: adding irq mask 0x100
> PNP0b00: end config
> pnpbios: handle 10 device ID PNP0b00 (000bd041)
> PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
> PNP0a03: end config
> pnpbios: handle 11 device ID PNP0a03 (030ad041)
> PNP0c02: adding fixed memory32 range 0xcf000-0xcffff, size=0x1000
> PNP0c02: end config
> pnpbios: handle 12 device ID PNP0c02 (020cd041)
> PNP0f13: adding irq mask 0000
> PNP0f13: end config
> pnpbios: handle 13 device ID PNP0f13 (130fd041)
> PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
> PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
> PNP0700: adding irq mask 0x40
> PNP0700: adding dma mask 0x4
> PNP0700: end config
> pnpbios: handle 14 device ID PNP0700 (0007d041)
> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
> PNP0501: adding irq mask 0x10
> PNP0501: end config
> pnpbios: handle 15 device ID PNP0501 (0105d041)
> SMCf010: adding io range 0x2e8-0x2ef, size=0x8, align=0x1
> SMCf010: adding io range 0x400-0x43f, size=0x40, align=0x80
> SMCf010: adding irq mask 00x8
> SMCf010: adding dma mask 0x8
> SMCf010: end config
> pnpbios: handle 17 device ID SMCf010 (10f0a34d)
> PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x1
> PNP0400: adding io range 0x778-0x77b, size=0x4, align=0x1
> PNP0400: adding irq mask 0x80
> PNP0400: end config
> pnpbios: handle 19 device ID PNP0400 (0004d041)
> PNP0e03: adding io range 0-0xffffffff, size=0, align=0
> PNP0e03: end config
> pnpbios: handle 21 device ID PNP0e03 (030ed041)
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcefff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ata2 failed to probe at port 0x1f0 irq 14 on isa0
> ata3 failed to probe at port 0x170 irq 15 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x54ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3-00, 3 buttons
> psm0: config:00000000, flags:00000000, packet size:4
> psm0: syncmask:08, syncbits:08
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0: vga0, vga, type:VGA (5), flags:0x7007f
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81
> bf 1f 00 4f 0d 0e 00 00 06 40 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81
> bf 1f 00 4f 0d 0e 00 00 06 40 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic3 failed to probe at port 0x3e2 iomem 0xd4000 on isa0
> sio0: irq maps: 0x841 0x851 0x841 0x841
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> ppc0: parallel port found at 0x378
> ppc0: using extended I/O port range
> ppc0: EPP SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> plip0: <PLIP network interface> on ppbus0
> bpf: lp0 attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> vpo0: can't connect to the drive
> imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
> imm0: (connect) s1=0x38 s2=0x38, s3=0x38
> imm0: (connect) s1=0x38 s2=0x38, s3=0x38
> isa_probe_children: probing PnP devices
> unknown: <PNP0c02> failed to probe at port 0x10-0x18,0x1f,0x22,0x24-0x25,0x28-0x29,0x2c-0x2d,0x30-0x31,0x34-0x35,0x38-0x39,0x3c-0x3d,0x4e-0x4f,0x50-0x52,0x62,0x66,0x72-0x77,0x80,0x90-0x9f,0xa4-0xa5,0xa8-0xa9,0xac-0xad,0xb0-0xbd,0x4d0-0x4d1,0xf800-0xf87f,0xf880-0xf8ff,0xfc00-0xfc7f,0xfc80-0xfcbf,0xfd00-0xfd6f,0xfe00-0xfe0f iomem 0xfff00000-0xffffffff,0xffb00000-0xffbfffff on isa0
> unknown: <PNP0c01> failed to probe at iomem 0-0x9ffff,0xe4000-0xfffff,0x100000-0xfffffff on isa0
> unknown: <PNP0c04> failed to probe at port 0xf0-0xff irq 13 on isa0
> pca0: <AT-style speaker sound> at port 0x61 on isa0
> unknown: <PNP0303> can't assign resources
> unknown: <PNP0303> at port 0x60 on isa0
> unknown: <PNP0200> failed to probe at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
> unknown: <PNP0000> can't assign resources
> unknown: <PNP0000> at port 0x20-0x21,0xa0-0xa1 irq 2 on isa0
> unknown: <PNP0100> failed to probe at port 0x40-0x43 irq 0 on isa0
> unknown: <PNP0b00> failed to probe at port 0x70-0x71 irq 8 on isa0
> unknown: <PNP0a03> failed to probe at port 0xcf8-0xcff on isa0
> unknown: <PNP0c02> failed to probe at iomem 0xcf000-0xcffff on isa0
> unknown: <PNP0f13> can't assign resources
> unknown: <PNP0f13> on isa0
> unknown: <PNP0700> can't assign resources
> unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
> unknown: <PNP0501> can't assign resources
> unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
> unknown: <SMCf010> failed to probe at port 0x2e8-0x2ef,0x400-0x43f irq 3 drq 3 on isa0
> unknown: <PNP0400> can't assign resources
> unknown: <PNP0400> at port 0x378-0x37f on isa0
> unknown: <PNP0e03> failed to probe at port 0x19 on isa0
> pcic1: Event mask 0xf
> BIOS Geometries:
> 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
> 0 accounted for
> Device configuration finished.
> bpf: lo0 attached
> ata1-slave: ATAPI identify retries exceeded
> pcic1: Autodetected 5.0V card
> pccard: card inserted, slot 1
> pcic1: reset 1 int is 10 stat is 6f
> pccard: card removed, slot 1
> ad0: success setting UDMA5 on Intel chip
> Creating DISK ad0
> pcic1: reset 1 int is 10 stat is 6f
> pcic1: Autodetected 5.0V card
> pccard: card inserted, slot 1
> pcic1: reset 2 int is 70 stat is 4f
> pcic1: reset 3 int is 70 stat is 4f
> ar: FreeBSD check1 failed
> ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master
> ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, UDMA100
> ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
> ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
> ata1-master: success setting PIO4 on generic chip
> acd0: <HITACHI DVD-ROM GD-S250/0012> DVD-ROM drive at ata1 as master
> acd0: read 1722KB/s (34515KB/s), 512KB buffer, PIO4
> acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
> acd0: Writes:
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> Mounting root from ufs:/dev/ad0s2a
> ad0s1: type 0x5, start 36001665, end = 39070079, size 3068415 : OK
> ad0s2: type 0xa5, start 63, end = 36001664, size 36001602 : OK
> ad0s5: type 0xb, start 36001728, end = 39070079, size 3068352
> ad0s5: C/H/S start 1023/1/1 (16434558) != start 36001728: invalid
> start_init: trying /sbin/init
> pcic1: reset 0
> Linux ELF exec handler installed
> pccard1: Assigning wi0: io 0x240-0x27f irq 11 mem 0x0-0xffffffff
> pcic: I/O win 0 flags 15 240-27f
> wi0: Forcing IRQ to 11
> pcic: I/O win 0 flags 5 240-27f
> wi0 at port 0x240-0x27f irq 11 flags 0x10000 slot 1 on pccard1
> pcic: I/O win 0 flags 15 240-27f
> wi0: Forcing IRQ to 11
> wi0: 802.11 address: 00:06:25:01:da:49
> wi0: using RF:PRISM2.5 MAC:ISL3873
> wi0: Intersil Firmware: Primary 1.00.04, Station 1.00.03
> wi0: wi_has_wep = 1
> bpf: wi0 attached
> pcic1: Event mask 0x9
>
> Kernel Config:
>
> #
> #
> # For more information on this file, please read the handbook section on
> # Kernel Configuration Files:
> #
> # http://www.FreeBSD.org/handbook/kernelconfig-config.html
> #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
> # device lines is also present in the ./LINT configuration file. If you are
> # in doubt as to the purpose or necessity of a line, check first in LINT.
> #
> # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.38 2002/01/25 17:41:40 murray Exp $
>
> machine i386
> cpu I686_CPU
> ident LERLAPTOP
> maxusers 0
>
> #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
>
> options INET #InterNETworking
> options INET6 #IPv6 communications protocols
> options FFS #Berkeley Fast Filesystem
> options FFS_ROOT #FFS usable as root device [keep this!]
> options SOFTUPDATES #Enable FFS soft updates support
> options UFS_DIRHASH #Improve performance on big directories
> options PROCFS #Process filesystem
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
> options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
> options VISUAL_USERCONFIG #visual boot -c editor
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options P1003_1B #Posix P1003_1B real-time extensions
> options _KPOSIX_PRIORITY_SCHEDULING
> options ICMP_BANDLIM #Rate limit bad replies
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options PNPBIOS
> options PERFMON
> # CPU_ENABLE_SSE enables SSE/MMX2 instructions support.
> options CPU_ENABLE_SSE
>
>
> device isa
> device pci
>
> # Floppy drives
> device fdc0 at isa? port IO_FD1 irq 6 drq 2
> device fd0 at fdc0 drive 0
> #
>
> # ATA and ATAPI devices
> device ata0 at isa? port IO_WD1 irq 14
> device ata1 at isa? port IO_WD2 irq 15
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> options ATA_STATIC_ID #Static device numbering
>
> # SCSI peripherals
> device scbus # SCSI bus (required)
> device da # Direct Access (disks)
> device sa # Sequential Access (tape etc)
> device cd # CD
> device pass # Passthrough device (direct SCSI access)
>
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc0 at isa? port IO_KBD
> device atkbd0 at atkbdc? irq 1 flags 0x1
> device psm0 at atkbdc? irq 12
>
> device vga0 at isa?
>
> # splash screen/screen saver
> pseudo-device splash
>
> # syscons is the default console driver, resembling an SCO console
> device sc0 at isa? flags 0x100
>
>
> # Floating point support - do not disable.
> device npx0 at nexus? port IO_NPX irq 13
>
> # Power management support (see LINT for more options)
> ########################################vvvv was 0x20
> device apm0 at nexus? flags 0x00 # Advanced Power Management
>
> # PCCARD (PCMCIA) support
> device card
> device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
> device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000
>
> # Serial (COM) ports
> device sio0 at isa? port IO_COM1 flags 0x10 irq 4
>
> # Parallel port
> device ppc0 at isa? irq 7
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> device vpo # Requires scbus and da
>
>
> # PCI Ethernet NICs.
> device miibus # MII bus support
> device rl # RealTek 8129/8139
>
> # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
> # exists only as a PCMCIA device, so there is no ISA attachment needed
> # and resources will always be dynamically assigned by the pccard code.
> device wi
>
> # Pseudo devices - the number indicates how many units to allocate.
> pseudo-device loop # Network loopback
> pseudo-device ether # Ethernet support
> #pseudo-device sl 1 # Kernel SLIP
> #pseudo-device ppp 1 # Kernel PPP
> pseudo-device tun # Packet tunnel.
> pseudo-device pty # Pseudo-ttys (telnet etc)
> #pseudo-device gif # IPv6 and IPv4 tunneling
> #pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
>
> # The `bpf' pseudo-device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> pseudo-device bpf #Berkeley packet filter
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device usb # USB Bus (required)
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device ulpt # Printer
> device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
> device uscanner # Scanners
> device urio # Diamond Rio MP3 Player
> # USB Ethernet, requires mii
> device aue # ADMtek USB ethernet
> device cue # CATC USB ethernet
> device kue # Kawasaki LSI USB ethernet
> #####LER
> device pcm # sound?
> device smbus
> device iicbus
> device iicbb
> device intpm
> device ichsmb
> device smb
> device iic
> device ic
> device pca
> pseudo-device speaker
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
>
--
John L. Utz III
john@utzweb.net
Idiocy is the Impulse Function in the Convolution of Life
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.44.0204291158040.6387-100000>