Date: Thu, 1 Nov 2001 16:51:43 +0100 (CET) From: Patric Mrawek <patric@sonnenwin.de> To: FreeBSD-gnats-submit@freebsd.org Subject: kern/31693: kernel fails to mount root from ufs:/dev/ad2s1a Message-ID: <200111011551.fA1Fphi25182@hugo10.ka.punkt.de>
next in thread | raw e-mail | index | archive | help
>Number: 31693
>Category: kern
>Synopsis: kernel fails to mount root from ufs:/dev/ad2s1a
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Nov 01 08:00:01 PST 2001
>Closed-Date:
>Last-Modified:
>Originator: Patric Mrawek
>Release: FreeBSD 4.4-STABLE i386
>Organization:
>Environment:
System:
FreeBSD 4.4-STABLE #3: Thu Nov 1 14:20:59 CET 2001 root@chili:/usr/obj/usr/src/sys/CHILI
>Description:
cvsup from this morning -> kernel is unable to mount root
kernel config is same as before updating
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #3: Thu Nov 1 14:20:59 CET 2001
root@chili:/usr/obj/usr/src/sys/CHILI
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 469696512 (458688K bytes)
avail memory = 453132288 (442512K bytes)
Preloaded elf kernel "kernel" at 0xc033a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc033a0a8.
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc02d8482 (1000022)
VESA: ATI RAGE128
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fdd70
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Rage128-RL graphics accelerator> at 0.0
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA33 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 8.0 irq 11
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 8.1 irq 11
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd800-0xd83f irq 10 at device 9.0 on pci0
xl0: Ethernet address: 00:10:4b:40:02:32
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <ESS Solo-1 (unknown vendor)> port 0xec00-0xec03,0xe800-0xe803,0xe400-0xe40f,0xe000-0xe00f,0xdc00-0xdc3f irq 5 at device 11.0 on pci0
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <32 virtual consoles, flags=0x0>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ad0: 16446MB <ST317221A> [33416/16/63] at ata0-master UDMA33
ad1: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata1-master UDMA33
ata0-slave: timeout waiting for command=ef s=00 e=00
ata0-slave: timeout waiting for command=ef s=00 e=00
acd0: CDROM <Pioneer CD-ROM ATAPI Model DR-A24X 0101> at ata0-slave using BIOSPIO
Mounting root from ufs:/dev/ad2s1a
Root mount failed: 6
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:/dev/da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
/usr/src/sys/i386/conf/CHILI
machine i386
cpu I686_CPU # aka Pentium Pro(tm)
ident CHILI
maxusers 512
options MAXDSIZ="(256*1024*1024)"
options MAXSSIZ="(256*1024*1024)"
options DFLDSIZ="(256*1024*1024)"
options BLKDEV_IOSIZE=8192
options PQ_CACHESIZE=512 # color for 512k/16k cache
options CPU_ENABLE_SSE
options COMPAT_43
options USER_LDT #allow user-level control of i386 ldt
options SYSVSHM # include support for shared memory
options SYSVSEM # include support for semaphores
options SYSVMSG # include support for message queues
options DDB
options KTRACE #kernel tracing
options INET #Internet communications protocols
pseudo-device ether #Generic Ethernet
pseudo-device loop #Network loopback device
pseudo-device bpf #Berkeley packet filter
options RANDOM_IP_ID
options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
options ICMP_BANDLIM
options FFS #Fast filesystem
options MFS #Memory File System
options NFS #Network File System
options CD9660 #ISO 9660 filesystem
options MSDOSFS #MS DOS File System
options PROCFS #Process filesystem
options FFS_ROOT #FFS usable as root device
options SOFTUPDATES
options SUIDDIR
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
pseudo-device pty #Pseudo ttys
pseudo-device vn #Vnode driver (turns a file into a device)
pseudo-device md #Memory/malloc disk
pseudo-device snp 3 #Snoop device - to look at pty/vty/etc..
device isa
options AUTO_EOI_1
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
makeoptions ATKBD_DFLT_KEYMAP="german.iso"
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device psm0 at atkbdc? irq 12
device vga0 at isa?
options VESA
pseudo-device splash
device sc0 at isa?
options MAXCONS=32 # number of virtual consoles
options SC_DFLT_FONT # compile font in
makeoptions SC_DFLT_FONT=iso
device npx0 at nexus? port IO_NPX flags 0x0 irq 13
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options IDE_DELAY=8000 # Be optimistic about Joe IDE device
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device pcm
device apm0
device pci
device miibus
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>How-To-Repeat:
just reboot :)
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200111011551.fA1Fphi25182>