Date: Thu, 26 Sep 2024 09:47:11 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-arm@FreeBSD.org Subject: [Bug 281722] PCIe is broken on Quartz64 Model A (RK3566) Message-ID: <bug-281722-7@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D281722 Bug ID: 281722 Summary: PCIe is broken on Quartz64 Model A (RK3566) Product: Base System Version: CURRENT Hardware: arm64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: arm Assignee: freebsd-arm@FreeBSD.org Reporter: peterj@FreeBSD.org Running -current at g6e414739fc95, verbose boot, with a SATA card in the PC= Ie slot, reports: pcib0: <RockChip RK3568 PCI-express controller> mem 0x3c0000000-0x3c03fffff,0xfe260000-0xfe26ffff,0xf4000000-0xf40fffff irq 36,37,38,39 ,40 on ofwbus0 rk3568_combphy1: configuring for PCIe ref_clk=3D25000000 pcib0: Bus is not cache-coherent pcib0: Using iATU unroll mode pcib0: Detected outbound iATU regions: 8 pci0: <OFW PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x1d87, dev=3D0x3566, revid=3D0x01 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 32 messages, 64 bit MSI-X supports 1 message in map 0x10 secbus=3D0, subbus=3D0 pcib1: <PCI-PCI bridge> at device 0.0 on pci0 pcib1: Lazy allocation of 1 bus at 1 pcib1: failed to allocate initial I/O port window: 0-0xfff pcib1: failed to allocate initial memory window: 0-0xfffff pcib1: failed to allocate initial prefetch window: 0-0xfffff pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pci1: <PCI bus> on pcib1 pcib1: allocated bus range (1-1) for rid 0 of pci1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x197b, dev=3D0x0585, revid=3D0x00 domain=3D0, bus=3D1, slot=3D0, func=3D0 class=3D01-06-01, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 powerspec 3 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type I/O Port, range 32, base 0, size 7, port disabled map[14]: type I/O Port, range 32, base 0, size 7, port disabled map[18]: type I/O Port, range 32, base 0, size 7, port disabled map[1c]: type I/O Port, range 32, base 0, size 7, port disabled map[20]: type I/O Port, range 32, base 0, size 7, port disabled map[24]: type Memory, range 32, base 0, size 13, memory disabled ahci0: <JMicron JMB58x AHCI SATA controller> at device 0.0 on pci1 pcib1: allocated initial memory window of 0x40000000-0x400fffff pcib1: allocated memory range (0x40000000-0x40001fff) for rid 24 of ahci0 ahci0: Lazy allocation of 0x2000 bytes rid 0x24 type 3 at 0x40000000 ofw_pci mapdev: start 300000000, len 8192 ahci0: AHCI controller reset failure device_attach: ahci0 attach returned 6 The card is visible via pciconf: pcib1@pci0:0:0:0: class=3D0x060400 rev=3D0x01 hdr=3D0x01 vendor=3D0x1= d87 device=3D0x3566 subvendor=3D0x0000 subdevice=3D0x0000 vendor =3D 'Rockchip Electronics Co., Ltd' device =3D 'RK3568 Remote Signal Processor' class =3D bridge subclass =3D PCI-PCI none0@pci0:1:0:0: class=3D0x010601 rev=3D0x00 hdr=3D0x00 vendor=3D0x1= 97b device=3D0x0585 subvendor=3D0x197b subdevice=3D0x0000 vendor =3D 'JMicron Technology Corp.' device =3D 'JMB58x AHCI SATA controller' class =3D mass storage subclass =3D SATA I haven't investigated further at present. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-281722-7>