Date: Wed, 5 Jul 2017 15:04:20 -0700 From: Russell Haley <russ.haley@gmail.com> To: Ian Lepore <ian@freebsd.org> Cc: Yoshiro MIHIRA <sanpei.ml@gmail.com>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: HummingBoard-i2 does not boot from install image Message-ID: <CABx9NuQy50%2BaVoxdFS2AXn4BLgecmriE6Qyh=DU9noXdf_B8Qg@mail.gmail.com> In-Reply-To: <1499286651.4402.40.camel@freebsd.org> References: <CALwmBx3O2Ovc%2B2ixGxoY5CFLe96M1C5tJeLMMR5vO=%2B=HTHSkw@mail.gmail.com> <1499286651.4402.40.camel@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 5, 2017 at 1:30 PM, Ian Lepore <ian@freebsd.org> wrote: > On Wed, 2017-07-05 at 12:01 +0000, Yoshiro MIHIRA wrote: >> I have HummingBoard-i2 and I could not boot 12.0-CURRENT boot image. >> Please let me know to boot 12.0-CURRENT with HummingBoard. >> >> I tested >> FreeBSD-12.0-CURRENT-arm-armv6-CUBOX-HUMMINGBOARD-20170619- >> r320095.img >> >> And it does not boot up with below message[NG]. >> >> U-Boot SPL 2017.01-rc3 (Jun 13 2017 - 02:16:03) >> SPL: Unsupported Boot Device! >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### >> >> I have a old image >> as FreeBSD-11.0-STABLE-arm-armv6-CUBOX-HUMMINGBOARD-20161221- >> r310359.img >> it can boot[OK]. >> >> Consoles: U-Boot console >> Compatible U-Boot API signature found @0x4f7708a8 >> >> FreeBSD/armv6 U-Boot loader, Revision 1.2 >> (root@releng2.nyi.freebsd.org, Wed Dec 21 18:14:05 UTC 2016) >> >> DRAM: 1024MB >> Number of U-Boot devices: 2 >> U-Boot env: loaderdev='mmc 0' >> Found U-Boot device: disk >> Checking unit=0 slice=<auto> partition=<auto>... good. >> Booting from disk0s2a: >> /boot/kernel/kernel data=0x6ec964+0x14b69c >> syms=[0x4+0x7cef0+0x4+0x90376] >> >> Hit [Enter] to boot immediately, or any other key for command prompt. >> Booting [/boot/kernel/kernel] in 4 seconds... >> >> Thanks >> Yoshiro MIHIRA > > I just downloaded that same 20170619 image and it boots fine on my > Cubox, but its build date/time are different: > > U-Boot SPL 2017.01-rc3 (Jun 19 2017 - 20:54:45) > > I don't have a hummingboard to test, but u-boot has always been able to > use the same image to boot a cubox and a hummingboard. There are different hummingboard baseboards and different hummingboard SOMs and they can be mixed and matched. The SOMs come in single, dual-lite, dual, and quad core configurations. The dual-lite and dual SOMs ARE NOT THE SAME architecture and require different uboot 'stuffs'. I don't remember off the top of my head, but I seem to remember having to build two parts of U-boot and then create one binary? I would wager that you have a dual-lite SOM and there is some 'stuffs' you will need to do with u-boot? I remember thinking I dodged a bullet by buying the dual and not dual-lite SOM so the stock image worked on my board. Sorry, I'm pinned busy right now so I can't look up what 'stuffs' means. It should be on the wiki or in the mailing list archives. Or was it in the u-boot readme in ports? :( Russ
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABx9NuQy50%2BaVoxdFS2AXn4BLgecmriE6Qyh=DU9noXdf_B8Qg>