Date: 14 Aug 1996 09:05:38 +0100 From: mark@plato.ucsalf.ac.uk (Mark Powell) To: freebsd-emulation@freebsd.org Subject: 2.2-960801-SNAP further problems Message-ID: <m0uqaxR-00036xC@viking.ucsalf.ac.uk>
next in thread | raw e-mail | index | archive | help
Updated to the latest snap on an otherwise perfectly working 2.1.5R. A couple of servers died yesterday on signal 6. I've never seen this before: Aug 13 15:20:38 plato /kernel: pid 186 (cached), uid 0: exited on signal 6 (core dumped) Aug 13 19:30:15 plato /kernel: pid 237 (XF86_S3), uid 0: exited on signal 6 My 5am full back-up worked once, but the last two attempts have failed with: First fail: Aug 13 05:01:46 plato /kernel: st0(ahc0:2:0): timed out in dataout phase, SCSISIGI == 0x0 Aug 13 05:01:46 plato /kernel: st0(ahc0:2:0): BUS DEVICE RESET message queued. Aug 13 05:01:47 plato /kernel: Bus Device Reset Message Sent Aug 13 05:01:47 plato /kernel: st0(ahc0:2:0): Bus Device Reset delivered. 1 SCBs aborted Aug 13 05:01:47 plato /kernel: st0(ahc0:2:0): UNIT ATTENTION asc:29,0 Aug 13 05:01:47 plato /kernel: st0(ahc0:2:0): Power on, reset, or bus device reset occurred Second fail: Aug 14 05:01:45 plato /kernel: st0(ahc0:2:0): timed out in dataout phase, SCSISIGI == 0x0 Aug 14 05:01:46 plato /kernel: st0(ahc0:2:0): BUS DEVICE RESET message queued. Aug 14 05:01:46 plato /kernel: Bus Device Reset Message Sent Aug 14 05:01:46 plato /kernel: st0(ahc0:2:0): Bus Device Reset delivered. 1 SCBs aborted Aug 14 05:01:46 plato /kernel: st0(ahc0:2:0): UNIT ATTENTION asc:29,0 Aug 14 05:01:46 plato /kernel: st0(ahc0:2:0): Power on, reset, or bus device reset occurred Aug 14 05:01:46 plato /kernel: ahc0: target 2 synchronous at 10.0MHz, offset = 0x8 Aug 14 05:03:25 plato /kernel: st0(ahc0:2:0): timed out in dataout phase, SCSISIGI == 0x0 Aug 14 05:03:26 plato /kernel: st0(ahc0:2:0): BUS DEVICE RESET message queued. Aug 14 05:03:26 plato /kernel: Bus Device Reset Message Sent Aug 14 05:03:26 plato /kernel: st0(ahc0:2:0): Bus Device Reset delivered. 1 SCBs aborted Aug 14 05:03:26 plato /kernel: ahc0: target 2 synchronous at 10.0MHz, offset = 0x8 Nothing on the SCSI bus has changed since the working 2.1.5R. SCSI info: Aug 13 15:20:24 plato /kernel: ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:18 Aug 13 15:20:25 plato /kernel: mapreg[10] type=1 addr=00006000 size=0100. Aug 13 15:20:25 plato /kernel: mapreg[14] type=0 addr=f2000000 size=1000. Aug 13 15:20:25 plato /kernel: ahc0: Reading SEEPROM...done. Aug 13 15:20:25 plato /kernel: ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs Aug 13 15:20:25 plato /kernel: ahc0: Reseting Channel A Aug 13 15:20:26 plato /kernel: ahc0: Downloading Sequencer Program...Done Aug 13 15:20:26 plato /kernel: ahc0: Probing channel A Aug 13 15:20:26 plato /kernel: ahc0: target 0 synchronous at 10.0MHz, offset = 0xf Aug 13 15:20:26 plato /kernel: ahc0: target 0 Tagged Queuing Device Aug 13 15:20:27 plato /kernel: (ahc0:0:0): "CONNER CFP4207S 4.28GB 1524" type 0 fixed SCSI 2 Aug 13 15:20:27 plato /kernel: sd0(ahc0:0:0): Direct-Access 4096MB (8388608 512 byte sectors) Aug 13 15:20:28 plato /kernel: sd0(ahc0:0:0): with 3999 cyls, 20 heads, and an average 104 sectors/ track Aug 13 15:20:28 plato /kernel: ahc0: target 1 using 16Bit transfers Aug 13 15:20:28 plato /kernel: ahc0: target 1 synchronous at 10.0MHz, offset = 0x8 Aug 13 15:20:28 plato /kernel: ahc0: target 1 Tagged Queuing Device Aug 13 15:20:28 plato /kernel: (ahc0:1:0): "CONNER CFP4207W 4.28GB 1524" type 0 fixed SCSI 2 Aug 13 15:20:28 plato /kernel: sd1(ahc0:1:0): Direct-Access 4096MB (8388608 512 byte sectors) Aug 13 15:20:29 plato /kernel: sd1(ahc0:1:0): with 3999 cyls, 20 heads, and an average 104 sectors/ track Aug 13 15:20:29 plato /kernel: ahc0: target 2 synchronous at 10.0MHz, offset = 0x8 Aug 13 15:20:29 plato /kernel: (ahc0:2:0): "HP C1533A 9503" type 1 removable SCSI 2 Aug 13 15:20:29 plato /kernel: st0(ahc0:2:0): Sequential-Access density code 0x24, variable blocks, write-enabled Aug 13 15:20:29 plato /kernel: ahc0:A:4: refuses WIDE negotiation. Using 8bit transfers Aug 13 15:20:29 plato /kernel: ahc0: target 4 synchronous at 4.4MHz, offset = 0xf Aug 13 15:20:29 plato /kernel: (ahc0:4:0): "TOSHIBA CD-ROM XM-3701TA 0236" type 5 removable SCSI 2 Aug 13 15:20:29 plato /kernel: cd0(ahc0:4:0): CD-ROM Aug 13 15:20:29 plato /kernel: cd0(ahc0:4:0): NOT READY asc:4,1 Aug 13 15:20:29 plato /kernel: cd0(ahc0:4:0): Logical unit is in process of becoming ready Aug 13 15:20:29 plato /kernel: can't get the size -- Mark Powell - Senior Network Technician - Room: C806 Computer Services Unit, University College Salford, Salford, Manchester, UK. Tel: +44 161 745 3376 Fax: +44 161 736 3596 Email: mark@ucsalf.ac.uk finger mark@ucsalf.ac.uk (for PGP key) <A HREF="http://www.ucsalf.ac.uk/~mark/">Home Page</A>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0uqaxR-00036xC>