Date: Mon, 25 Apr 2005 20:40:43 -0400 From: Mike Tancsa <mike@sentex.net> To: "Michael G. Jung" <mikej@confluenttech.com> Cc: freebsd-questions@freebsd.org Subject: Re: EM driver and Intel Pro 1000 MT (A78408-008) Message-ID: <l93r6199h1cq0m4dqsj95b8o36caquu6aa@4ax.com> In-Reply-To: <9D7F0DF3FB16D41184010050DA90E00001C8751B@neo.confluentasp.local> References: <9D7F0DF3FB16D41184010050DA90E00001C8751B@neo.confluentasp.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 25 Apr 2005 16:50:02 -0400, in sentex.lists.freebsd.net you
wrote:
>FreeBSD firewall.mikej.com 5.4-RC3 FreeBSD 5.4-RC3 #5: Sun Apr 24 =
19:18:40 EDT 2005 =20
>mikej@firewall.mikej.com:/usr/obj/usr/src/sys/FIREWALL i386
>
>em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>=20
>port 0xef00-0xef3f mem 0xfeba0000-0xfebbffff,0xfebc0000-0xfebdffff irq =
18 at device 18.0 on pci0
>
>I got several of these card which I have put in FreeBSD/Windows =
machines. =20
>
>Under FreeBSD 5.4-RC3 I can not get the card to run at GB.
I think I have the same cards.
[nfs]% grep ^em /var/run/dmesg.boot=20
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xd100-0xd13f mem 0xfb000000-0xfb01ffff,0xfb020000-0xfb03ffff irq 19
at device 9.0 on pci1
em0: Ethernet address: 00:0e:0c:5d:f7:c0
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xd200-0xd23f mem 0xfb060000-0xfb07ffff,0xfb040000-0xfb05ffff irq 18
at device 10.0 on pci1
em1: Ethernet address: 00:0e:0c:5d:f7:c6
em1: Speed:N/A Duplex:N/A
em1: Link is up 1000 Mbps Full Duplex
em0: Link is up 100 Mbps Full Duplex
What happens when you do=20
ifconfig em0 media autoselect
?
Also, can you post the full output of ifconfig em0 so that it shows
the various flags set ?
e.g.
[nfs]% ifconfig em1
em1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3Db<RXCSUM,TXCSUM,VLAN_MTU>
inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255
ether 00:0e:0c:5d:f7:c6
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
[nfs]% uname -a
=46reeBSD nfs.sentex.ca 5.4-STABLE FreeBSD 5.4-STABLE #3: Sun Apr 24
15:01:15 EDT 2005 mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs
i386
[nfs]%=20
---Mike
--------------------------------------------------------
Mike Tancsa, Sentex communications http://www.sentex.net
Providing Internet Access since 1994
mike@sentex.net, (http://www.tancsa.com)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?l93r6199h1cq0m4dqsj95b8o36caquu6aa>