Date: Tue, 13 Jul 2004 00:05:14 +0200 From: Arjan Van Leeuwen <avleeuwen@gmail.com> To: DrVince <drvince@anonymnet.net> Cc: freebsd-questions@freebsd.org Subject: Re: Current freezes Message-ID: <d86b48730407121505162c4d44@mail.gmail.com> In-Reply-To: <20040712192344.M6134@anonymnet.net> References: <20040712123430.CF2D943D53@mx1.FreeBSD.org> <20040712192344.M6134@anonymnet.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Check the current@ mailing list for reasons and solutions. Arjan On Mon, 12 Jul 2004 14:36:02 -0500, DrVince <drvince@anonymnet.net> wrote: > Hi, > since 3 days ago, I updated my FreeBSD-current box using up-to-date sources. > Since that time, my box is unstable, it freezes often with the message: > "softdep_setup_inomapdep: found inode". And I can't relate it to any > behavior. It happens sometimes when it's idle, sometime when it's working, > sometime when it's almost only downloading, it seems random to me. I've done > many kernels trying to find out what is going wrong by I can't isolate it. > > Here are infos which may help: > - dmesg > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2-CURRENT #7: Mon Jul 12 14:43:45 EDT 2004 > root@*addy*:/usr/obj/usr/src/sys/vincey > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) (1094.15-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0400000<AMIE,DSP,3DNow!> > real memory = 536805376 (511 MB) > avail memory = 519802880 (495 MB) > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> at pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard > pci0: <PCI bus> on pcib0 > $PIR: No matching entry for 0.1.INTA > $PIR: No matching entry for 0.2.INTA > $PIR: No matching entry for 0.2.INTB > $PIR: No matching entry for 0.2.INTC > pci0: <memory, RAM> at device 0.1 (no driver attached) > pci0: <memory, RAM> at device 0.2 (no driver attached) > pci0: <memory, RAM> at device 0.3 (no driver attached) > pci0: <memory, RAM> at device 0.4 (no driver attached) > pci0: <memory, RAM> at device 0.5 (no driver attached) > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <serial bus, SMBus> at device 1.1 (no driver attached) > pci0: <serial bus, USB> at device 2.0 (no driver attached) > pci0: <serial bus, USB> at device 2.1 (no driver attached) > pci0: <serial bus, USB> at device 2.2 (no driver attached) > pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0 > pci1: <PCI bus> on pcib1 > pcm0: <Creative Audigy 2 (EMU10K2)> port 0xd000-0xd03f irq 10 at device 7.0 on > pci1 > pcm0: <SigmaTel STAC9721/23 AC97 Codec> > pci1: <serial bus, FireWire> at device 7.2 (no driver attached) > ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xd800-0xd81f irq 11 at device > 9.0 on pci1 > ed0: [GIANT-LOCKED] > ed0: Ethernet address: 00:c0:a8:50:e2:f6 > type NE2000 (16 bit) > atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f,0x376, > 0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pcib2: <PCI-PCI bridge> at device 30.0 on pci0 > pci2: <PCI bus> on pcib2 > pci2: <display, VGA> at device 0.0 (no driver attached) > cpu0 on motherboard > orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model MouseMan+, device ID 0 > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7, > 0x3f0-0x3f5 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/16 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > ppbus0: IEEE1284 device found /NIBBLE/ECP > Probing for PnP devices on ppbus0: > ppbus0: <HEWLETT-PACKARD DESKJET 990C> PRINTER MLC,PCL,PML > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > unknown: <PNP0303> can't assign resources (port) > unknown: <PNP0a03> can't assign resources (port) > unknown: <PNP0f13> can't assign resources (irq) > unknown: <PNP0501> can't assign resources (port) > unknown: <PNP0700> can't assign resources (port) > unknown: <PNP0401> can't assign resources (port) > unknown: <PNP0501> can't assign resources (port) > Timecounter "TSC" frequency 1094146253 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata0-master UDMA133 > ad1: 76344MB <MAXTOR 6L080J4> [155112/16/63] at ata0-slave UDMA133 > Mounting root from ufs:/dev/ad0s2a > > - KERNCONF > machine i386 > cpu I686_CPU > options CPU_ATHLON_SSE_HACK > options CPU_ENABLE_SSE > options NO_F00F_HACK > ident *ident* > > options SCHED_ULE #4BSD scheduler > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options SOFTUPDATES #Enable FFS soft updates support > options UFS_ACL #Support for access control lists > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > options COMPAT_FREEBSD4 #Compatible with FreeBSD4 > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time > extensions > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > device npx > > device isa > device eisa > device pci > > device fdc > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > options ATA_STATIC_ID #Static device numbering > device atapicam > device scbus > device cd > device pass > > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse > device vga # VGA video card driver > device splash # Splash screen and screen saver support > device sc > > device sio # 8250, 16[45]50 based serial ports > device ppc > device ppbus # Parallel port bus (required) > device lpt # Printer > > device random # Entropy device > device loop # Network loopback > device ether # Ethernet support > device tun # Packet tunnel. > device pty # Pseudo-ttys (telnet etc) > > device bpf # Berkeley packet filter > options HZ=2000 > options PFIL_HOOKS # pfil(9) framework > options RANDOM_IP_ID > device pf > device pflog > options ALTQ > options ALTQ_CBQ # Class Bases Queueing > options ALTQ_RED # Random Early Drop > options ALTQ_RIO # RED In/Out > options ALTQ_HFSC # Hierarchical Packet Scheduler > options ALTQ_CDNR # Traffic conditioner > options ALTQ_PRIQ # Prioirity Queueing > > DrVince > DrVince@anonymnet.net > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d86b48730407121505162c4d44>